Operation Manual

11
GB
Depending on the selected function, it could be needed to add / stir / turn food during cooking. In these cases
the oven will pause cooking and it will ask you to perform the needed action.
When required, you should:

Open the door.

Add, Stir or Turn the food (depending on the required action).

Close the door and restart by pressing the Confirmation Button / Jet Start button.
Notes:
- If the door is not opened within 2 minutes since the request to Add some food, the oven will go in Stand-by
mode.
- If the door is not opened within 2 minutes since the request to Stir ot Turn the food, the oven will continue the
cooking process (in this case the final results may not be the optimal ones).
ADD/ STIR/ TURN FOOD
i
CLOCK
The first time the oven is plugged in, or after a power failure, the product will enter clock setting. If the clock is
not set, the display will shows blank instead of the clock.
You can also set the clock at any time: just keep pressed for a few seconds the Timer Button when the product
is in Stand-By mode (see Stand-By Mode chapter).

The hours digits blink. Turn the Rotating Knob to set the hours.

Press Confirmation Button: the minutes digite start blinking.

Turn the Rotating Knob to set the minutes.

Press the Confirmation Button again.
The clock is set and in operation.
If STOP is pressed in clock setting mode, the clock will be disabled the display shows blank.