Istruzioni per l’uso
Avvertenze 4 Consigli per la salvaguardia dell’ambiente 5 Istruzioni di montaggio e d’uso 6 Utilizzazione 6 Montaggio 7 Descrizione della cappa 14 Funzionamento 14 Manutenzione 15 Servizio Assistenza Tecnica 17
Avvertenze • L’apparecchio non è destinato all’utilizzo da parte di bambini o persone con ridotte capacità fisiche sensoriali o mentali e con mancata esperienza e conoscenza a meno che essi non siano sotto la supervisione o istruiti nell'uso dell'apparecchiatura da una persona responsabile per la loro sicurezza. • I bambini devono essere controllati affinché non giochino con l’apparecchio. 1. Non collegare l’apparecchio alla rete elettrica finche l’installazione non è totalmente completata.
Avvertenze Dichiarazione di conformità Questo prodotto è stato concepito, costruito ed immesso sul mercato in conformità ai seguenti: - obiettivi di sicurezza della Direttiva “Bassa Tensione” 2006/95/CE (che sostituisce la 73/23/CEE e successivi emendamenti). - requisiti di protezione della Direttiva "EMC" 89/336/CEE modificata dalla successiva direttiva 2004/108/CEE.
Istruzioni di montaggio e d’uso Prodotto dal peso eccessivo, la movimentazione e installazione della cappa deve essere fatta da almeno due o più persone. Attenersi strettamente alle istruzioni riportate in questo manuale. Si declina ogni responsabilità per eventuali inconvenienti, danni o incendi provocati all’apparecchio derivati dall’inosservanza delle istruzioni riportate in questo manuale.
Montaggio La cappa è dotata di tasselli di fissaggio adatti alla maggior parte di pareti/soffitti. È tuttavia necessario interpellare un tecnico qualificato per accertarVi sull’idoneità dei materiali a seconda del tipo di parete/soffitto. La/il parete/soffitto deve essere sufficientemente robusto da sostenere il peso della cappa. dove poi appoggiare la cappa e i particolari a corredo.
Montaggio Fig. 4 • Solo versione filtrante: fissare il deflettore al traliccio: a. Inserire il deflettore da un lato del traliccio in modo che il foro rettangolare al centro sia rivolto verso il basso. b. Fissare il deflettore con 4 viti dall’alto del traliccio. c. Collegare all’anello di connessione fornito a corredo un tubo di scarico idoneo (Ø 150mm) sufficientemente lungo da raggiungere l’anello di connessione posto sul gruppo motore, quando questo verrà installato.
Montaggio Fig. 5 • Sulla verticale del piano di cottura, applicare lo schema di foratura al soffitto (il centro dello schema dovrà corrispondere al centro del piano di cottura ed i lati dovranno esser paralleli ai lati del piano di cottura - il lato dello schema con la scritta FRONT corrisponde al lato pannello di controllo). Predisporre il collegamento elettrico. • Forare come indicato (4 fori per 4 tasselli a muro). Inserire i 4 tasselli sui fori.
Montaggio Fig. 7 • Agganciare il traliccio alle 2 viti sul soffitto e fissare definitivamente con altre 2 viti (avanti e dietro). SERRARE CON DECISIONE TUTTE LE VITI. Fig. 9 • Agganciare il gruppo motore all traliccio sulle 4 viti già preavvitate sul gruppo. Attenzione! Far passare il cavo elettrico nel gruppo motore in modo che non si danneggi e sia possibile il collegamento alla scatola di connessione elettrica.
Montaggio Marr Blu 11
Montaggio Fig. 10 • Infilare il camino inferiore sul gruppo motore (verificare che il lato risbordato sia rivolto verso l’alto) e per mantenerlo temporaneamente in posizione infilare le due bacchette di sostegno temporaneo nelle apposite asole laterali sul gruppo motore. Appoggiare il camino inferiore sulle bacchette. Nota: questa operazione è necessaria per permettervi di continuare con l’installazione della cappa in maniera agevole. Fig.
Montaggio Fig. 12 • Eseguire il collegamento elettrico delle lampade e del pannello di controllo. • Rimuovere le due bacchette che sostengono temporaneamente il camino inferiore ed accompagnarlo verso il basso. • Inserire il camino nella apposita asola praticata sopra la cappa. Fig. 13 • Installare le due coperture superiori, fissare con 2 viti ciascuna copertura.
Descrizione della cappa Fig. 14 1. Pannello di controllo 2. Filtro antigrasso 3. Maniglia di sgancio del filtro antigrasso 4. Lampada alogena 5. Schermo vapori 6. Camino 7. Uscita aria (solo per utilizzo in versione filtrante) 8. Pannello Funzionamento Usare la velocità maggiore in caso di particolare concentrazione di vapori di cucina. Consigliamo di accendere l’aspirazione 5 minuti prima di iniziare a cucinare e di lasciarla in funzione a cottura terminata per altri 15 minuti circa. 1.
Manutenzione Prima di qualsiasi lavoro di manutenzione scollegare la cappa dalla corrente. Pulizia La cappa va frequentemente pulita (almeno con la stessa frequenza con cui si esegue la manutenzione dei filtri grassi), sia internamente che esternamente. Per la pulizia usare un panno inumidito con detersivi liquidi neutri. Evitare l’uso di prodotti contenenti abrasivi.
Manutenzione Filtro al carbone (solo per versione filtrante) Fig. 17 Trattiene gli odori sgradevoli derivanti dalla cottura. Il filtro al carbone può essere lavato ogni due mesi in acqua calda e detergenti idonei o in lavastoviglie a 65°C (in caso di lavaggio in lavastoviglie eseguire il ciclo di lavaggio completo senza stoviglie all’interno). Togliere l’acqua in eccesso senza rovinare il filtro, dopodiché riporlo nel forno per 10 minuti a 100°C per asciugarlo definitivamente.
Servizio Assistenza Tecnica Prima di contattare il Servizio Assistenza 1. Verificare se non è possibile eliminare da soli gli inconvenienti (vedere “Guida ricerca guasti”). 2. Spegnere e riavviare l’apparecchio per accertarsi che l’inconveniente sia stato ovviato. 3. Se il risultato è negativo, contattare il Servizio Assistenza. Comunicare: • il tipo di guasto, • il modello del prodotto rilevabile sulla targhetta matricola posizionata all’interno della cappa visibile una volta tolti i filtri antigrasso.
Printed in Italy 05/10 5019 718 02044 n I