Instruction for Use

Install the appliance away from heat sources.
Place the appliance in a dry, well ventilated
place.
Make sure that the appliance is levet.
Adjust the front feet
if necessary.
Leave at least 5 cm clearance above the
appliance.
The sides of some models are extended at
the rear so the appliance can be placed
against the rear wall. Otherwise, fit the
spacers (if supplied) on the upper part
of the
condenser at the rear of the appliance.
For models without lateral walls, the distance
between the unit and the wall must be at least
4.5 cm.
(see Tare and maintenance").
Cleaning the inside
Fit the accessories supplied.
Electrical connection
Electrical connections must be made in
accordance with local regulations.
Ensure that the voltage indicated on the
appliance rating plate corresponds to the
domestic supply voltage.
Appliance earthing is compulsory by law.
The Manufacturer declines all liabilities
for injury to persons and animals or
damage to property resulting from failure
to observe these regulations.
type, have the socket replaced by a qualified
electrician.
If the plug and socket are not of the same
Do not use extension cables, multiple sockets or
adapters.