Instructions for use
Installation diagrams 4 Important safety instructions 6 Safeguarding the environment 9 Eco Design Declaration 9 Before use 9 Using existing pots and pans 9 Recommended pan base diameters 9 Installation 10 Electrical wiring 10 Instructions for use 12 Cleaning 15 Troubleshooting 15 Noises made by the hob 15 After-sales service 16 Power setting table 16 3
Installation diagrams 180 mm x 230 mm 145 mm 180 mm x 230 mm 210 mm 4
Installation diagrams 770 mm 52 mm 510 mm 0 R = Min. 6,5 mm Max. 8 mm Min. 50 mm +1 0 30 mm 750 +2 mm 742 mm 483 mm 0 490 +2 mm Min. 10 cm Min. 5 mm Min. 3 cm Max.
These instructions are also available at: docs.kitchenaid.eu IMPORTANT SAFETY INSTRUCTIONS YOUR SAFETY AND THAT OF OTHERS IS VERY IMPORTANT This manual and the appliance itself provide important safety warnings which you should read and observe at all times. This is the hazard symbol, which warns of potential safety risks to users and others.
- Do not pull on the appliance’s power supply cable. - The user must not be able to access the electrical components after installation. - The appliance is designed solely for cooking food in a domestic environment. No other use is permitted (e.g. heating rooms). The manufacturer cannot be held responsible for inappropriate use or incorrect setting of the controls. - The appliance and its accessible parts become hot during use. Care should be taken to avoid touching the heating elements.
lid or a fire blanket. Risk of fire: Do not leave items on the cooking surfaces. - Do not use steam cleaners. - Metallic objects such as knives, forks, spoons and lids should not be placed on the surface of the hob as they can become hot. - After using the hob, switch off the element using its control and do not rely on the pan detector (only applies to hobs with a glass surface). Disposing of household appliances - This product is made from recyclable or reusable materials.
Safeguarding the environment Disposing of packaging materials The packaging materials are fully recyclable and marked with the recycling symbol . Dispose of the various packaging materials in compliance with your local authority’s regulations on waste disposal in order to prevent pollution of the environment. The symbol on the appliance or accompanying documentation indicates that this product should not be disposed of as domestic waste, but must be taken to a special collection point for recycling WEEE.
Installation min 5 mm After unpacking the product, check that it has not been damaged during transit. In case of problems, contact your dealer or our after-sales service. See the illustrations on page 5 for the appliance’s dimensions when built in and for installation instructions. PREPARING THE CABINET FOR FITTING WARNING • Observe the clearances between the underside of the appliance and the separator panel below it given in the figure.
Electrical wiring Connecting to the terminal block Use an H05RR-F or H05V2V2-F cable for the electrical wiring as indicated in the table below. Wires Number x size 220-240 V ~ 220-240 V ~ (UK and AU) B C 380-415 V 2N ~ 220-240 V 3 ~ (Belgium only) 230 V 230 V 4 x 1.5 mm2 230 V 380-415 V 2N ~ + 230 V 5 x 1.5 mm2 230 V 380-415 V 3N ~ + 230 V 5 x 1.
Instructions for use Description of the control panel On/off Bridge Zone function Timer Power management/lock function button Cooking zone controls and corresponding displays Switching the hob on/off To switch the hob on, press the button for approx. 2 seconds until the cooking zone displays light up. To switch off the hob, press and hold the same button until the displays switch off. All the cooking zones will be switched off.
Instructions for use Control panel lock This function locks the hob controls to prevent them from being activated accidentally. To activate the control panel lock, switch the hob on and press and hold the timer button for 3 seconds: A signal will sound and an indicator light will switch on by the padlock symbol to show that the function has been activated. The control panel is locked with the exception of the OFF function. To unlock the controls, repeat the activation procedure.
Instructions for use Step Control panel Display 1 + 2 Press the “power management” button to confirm The display shows 3 -/+ The light will switch on together with the usage indicator lights for the individual cooking zones 4 Press the “power management” button to confirm Press and hold for approx. 3 seconds Press to set the level you require from the different options available The display shows the selected setting, which will flash for approximately 2 seconds.
Cleaning WARNING - Do not use steam cleaners. - Before cleaning, make sure that the cooking zones are switched off and the residual heat indicator (“H”) is not displayed. IMPORTANT: Do not use abrasive sponges or pan scourers as these could damage the surface of the glass. • • • • Clean the hob after every use (wait until it has cooled down first) to remove any food residues. Sugar and foods with a high sugar content may damage the hob and must be removed immediately.
After-sales service Before contacting our after-sales service 1. See if you can solve the problem yourself by referring to the “Troubleshooting” section. 2. Switch the hob off and on again to see if the problem persists. If the fault persists after you have carried out the checks listed above, contact your nearest aftersales service.
Printed in Italy 05/16 n GB 400010887280