DE Gebrauchsanweisung
Produktbeschreibung und Symbole 4 Gasbrenner-Funktionen 4 Ratschläge zum Gebrauch der Kochmulde 5 Gasdüsentabelle 5 Funktionen der Induktionszonen 6 Positionieren der Roste und der Wok-Halterung 7 Einbaumaße für Haube und Schränke (mm) 8 Hinweise und allgemeine Ratschläge 9 Hinweise zum Umweltschutz 10 Installation 11 Gasanschluss 12 Elektrischer Anschluss 12 Kochmulde in den Schrank einbauen 13 Anpassung an andere Gastypen 13 Auswechseln der Gasdüsen 14 Mindestdurchfluss am Ga
Produktbeschreibung und Symbole 1. 2. 3. 4. 5. 6. 7. Abnehmbare Roste Profi-Wok-Doppelkranzbrenner 145 mm Durchmesser - Induktionszone Einstellknopf linker Gasbrenne Einstellknopf zentraler Gasbrenner Einstellknopf rechter Gasbrenner Display und Tastschalterbedienfeld für die Induktionszonen. Symbole der Gasbrenner-Einstellknöpfe A. Anzeiger der Gasbrennerposition B.
Ratschläge zum Gebrauch der Kochmulde Lesen Sie die Gebrauchsanweisungen aufmerksam, um Ihre Kochmulde optimal gebrauchen zu können. • Verwenden Sie nur Töpfe und Pfannen, deren Bodendurchmesser dem des Brenners entspricht (siehe Tabelle auf dieser Seite). • Verwenden Sie nur Töpfe und Pfannen mit flachem Boden. • Verwenden Sie nicht zu viel Wasser um Speisen zu kochen und decken Sie den Topf mit einem Deckel ab.
Funktionen der Induktionszonen Bei dieser Kochmulde sind 2 Induktionszonen vorgesehen, die es ermöglichen Wasser sehr schnell zum Sieden zu bringen und die Temperatur sehr genau einzustellen. Dadurch steht Ihnen eine große Auswahl an Garmöglichkeiten zur Verfügung. Die Bedientafel der Induktionszone hat folgende Funktionen: 1. 2. 3. 4. 5. 6. 7.
Funktionen der Induktionszonen Uhrsymbol, können Sie zudem jederzeit die noch übrig bleibende Zeit kontrollieren. Diese Funktion kann für beide Induktionszonen verwendet werden, jedoch nur zwei Mal innerhalb von 60 Minuten. Achtung: Aus Sicherheitsgründen bleibt die Schnellkochfunktion nur 5 Minuten lang aktiviert. Nach Ablauf dieser Zeit verringert das Kontrollsystem die Leistungsstufe automatisch und schaltet sie auf die Stufe 10.
Einbaumaße für Haube und Schränke (mm) ANMERKUNG: Falls eine Haube oberhalb der Kochmulde installiert werden soll, halten Sie sich bitte an die Installationsanweisungen und beachten Sie dabei den Abstand von der Kochmulde. Rückwand Vorderseite • Die Kochmulde muss in eine 20 bis 40 mm tiefe Arbeitsfläche eingesetzt werden. • Der Abstand zwischen der Unterseite der Glaskeramik-Kochmulde und Unterschrank oder Trennwand muss mit dem Maß in Abbildung „A“ übereinstimmen.
Hinweise und allgemeine Ratschläge • Eventuelle Reparaturen oder Eingriffe dürfen ausschließlich von Fachpersonal vorgenommen werden. • Die Stromkabel anderer Elektrogeräte, die in der Nähe der Kochmulde verwendet werden, dürfen nicht mit heißen Teilen in Kontakt kommen. • Die Induktionszonen schalten nicht ein, wenn das Kochgeschirr nicht den richtigen Durchmesser aufweist oder es einen Magneten nicht anzieht. Testen Sie es mit einem Magnet.
Hinweise zum Umweltschutz Hinweis: • Eine falsche Montage der Roste kann die Kochmulde verkratzen. Vergewissern Sie sich daher immer, dass die Gummifüße der Roste die einzigen Rostpartien sind die die Kochmulde berühren. Ziehen Sie nicht die Roste über die Kochmuldenfläche. • Verwenden Sie nicht folgende Gegenstände auf der Glasfläche: - Grille aus Gusseisen oder Steingutgeschirr. - Heizelemente (z.B. Metallnetze) - Verwenden Sie nicht gleichzeitig zwei Brenner für 1 Topf (z.B. Fischpfannen).
Installation Technische Informationen für den Installateur • Die Kochmulde kann in eine 20 bis 40 mm tiefe Arbeitsfläche installiert werden. • Die Kochmulde darf nicht oberhalb eines Backofens installiert werden. Montieren Sie auf jeden Fall eine Trennplatte unterhalb der Kochmulde in einem Abstand von 25 mm von der untersten Stelle (elektronisches Steuermodul). Beachten Sie bitte die Maße, die im Kapitel “Einbaumaße für Haube und Schränke (mm)” angegeben sind.
Gasanschluss Das Gasleitungssystem muss den örtlichen Vorschriften entsprechen. • Im Paragraphen „Nationale Gesetze" sind die jeweils geltenden nationalen Gesetze aufgeführt. • Falls Sie darunter keine Informationen zu den Gesetzen Ihres Landes finden, fragen Sie Ihren Installateur.
Kochmulde in den Schrank einbauen 1. Nachdem Sie die Flächen um die Kanten herum gereinigt haben, bringen Sie die mitgelieferte Dichtung um die Kochmulde herum an. 2. Positionieren Sie die Kochmulde in den Ausschnitt mit den in den beiliegenden Produktangaben aufgeführten Abmessungen an. 3. Verwenden Sie die mitgelieferten Stifte (A) und für die Stärke der Arbeitsplatte geeignete Schrauben um die Kochmulde zu befestigen.
Auswechseln der Gasdüsen (siehe modellspezifische Produktangaben). Entfernen Sie den Boden der Kochmulde indem Sie die Installationshalterungen entfernen und die Düse des Doppelkranzbrenners auswechseln. Setzen Sie sich bitte mit dem technischen Kundendienst in Verbindung. ABMONTIEREN DER HAUPTDÜSE Schrauben Sie die Gasdüse (F) mit einem Maulschlüssel zu 10mm ab. Lockern Sie die Befestigungsschraube (H) um die Position (X) der Gaszufuhrverbindung (G) im Verhältnis zur Düse einzustellen.
Reinigung und Pflege Um Ihre Kochmulde stets in einem guten Zustand zu bewahren, reinigen Sie sie und entfernen Sie jegliche Speisereste nach jedem Gebrauch. Vor den Reinigungs- und/oder Wartungsarbeiten müssen Sie das Gerät vom Stromnetz trennen und warten bis es abgekühlt ist. 3. Montieren Sie die Gasbrennerteile und Abdeckungen wieder richtig. 4. Kontrollieren Sie dass die Roste wieder auf jeden Brenner richtig positioniert worden sind.
Störungen - was tun? • Haben Sie das Kochfeld nach der Reinigung sorgfältig abgetrocknet? Sollte die Kochmulde nicht richtig funktionieren, versuchen Sie zuerst die Störung selbst anhand dieser Anweisungen zu beheben, bevor Sie die Kundendienststelle rufen. Wenden Sie sich bitte an eine Kundendienststelle, um das Stromkabel ersetzen zu lassen. 1.
Kundendienst Bevor Sie den Kundendienst rufen, kontrollieren Sie zuerst ob Sie das Problem selbst anhand der Anweisungen des Kapitels „Störung – was tun?“ beheben können. 1. Schalten Sie das Gerät aus und wieder ein, um festzustellen, ob die Störung erneut auftritt. Sollte die Störung nach den o.g. Kontrollen weiterhin bestehen, rufen Sie bitte den nächstliegenden Kundendienst an.
Whirlpool Europe S.r.l. Viale G. Borghi, 27 - 21025 Comerio (VA) Phone 0332.759111 - Fax 0332.759268 www.whirlpool.