Setup and user guide

ManualsBrandsWhirlpool ManualsOtherKR 19G4 A2+ IN

1. External indicators of Power On and alarms

2. Control panel

3. Main LED’s lighting

4. Fan

5. Lighting in Multi-flow*

6. Shelf divider*

7. Multi-flow cold air area*

8. Bottle rack *

9. Sensor cover

10. Zero degrees drawer*

11. Rating plate with commercial name

12. Cooler compartment (best for meat and fish)

13. Area shelves

14. Fruits and vegetables crisper

15. Crisper divider *

16. Door reversibility kit

17. Egg tray*

18. Bottle holder*

19. Door trays

20. Door seal

* Available on selected models

HOW TO START THE APPLIANCE

After plugging the appliance to the mains, it starts the

operation automatically. After starting the appliance, wait

at least 4-6 hours before placing food into the appliance.

When the appliance is connected to the power supply,

the display lights up and all the icons appear on the

display for approximately 1 second. The default (factory)

values of the freezer compartment settings light-up.

HOW TO REVERSE THE DOOR SWING

- see enclosed Instructions for Use (Version_2)

Is recommended to reverse door swing by two persons.

There is not foreseen door reversibility for:

- models with integrated handle

- models with glass panel on the door.

Specifications, technical data and images may vary

from model to model

Read the Instructions for Use carefully before

using the appliance.

19514698000

QUICK START GUIDE

ALARMS TABLE

ALARM TYPE Signal Cause Cure

Door open alarm

The acoustical alarm is activated and the Alarm Indicator

blinks.

The door has remained open for more than 2 minutes Close the door or press the Stop Alarm to mute the acoustical alarm.

Malfunction The letter “F” blinks on the display (°C) Product malfunction. Contact the After-sales Service

GBDE

POWER ON (EXTERNAL LED) indicator

An external green LED showing that the appliance is switched ON.

It automatically turns off when opening the door.

ALARM (EXTERNAL LED) indicator

This red LED can blink to show the occurrence of an alarm or a failure even when the

door is closed. Please open the door and check on the internal Control Panel which

alarm/failure is occurring.

TEMPERATURE

DISPLAY

ON/STANDBY button

To put the product in Stand-by, press

and hold the button for 3 seconds.

All the icons turn off except On/

Standby indicator . To reactivate

the appliance press once (briefly) this

button. (see the Instructions for Use).

TEMPERATURE button

Press the Temperature button

to change

the temperature: the value changes cyclically

between 8°C ad 2°C.

Note: Displayed set points correspond to the

average temperature throughout the whole

refrigerator.

FAST COOL button

Using Fast Cool function it is possible to increase the cooling capacity in the refrigerator

compartment. The use of this function is recommended when placing a very high quantity of food

in the refrigerator compartment. Press the Fast Cool button

to activate Fast Cool function.

When activated, the Fast Cool indicator turns on. The function is automatically disabled after

6 hours, or can be manually disabled by pressing Fast Cool button

again.

STOP ALARM button

Press in case of alarm to mute the acoustic alarm.

VACATION button

This function can be activated to reduce the energy

consumption of the appliance during a prolonged

period of time. Before activating the feature, all

perishable food should be removed from the

refrigeration compartment and make sure that the

door is closed properly, since the refrigerator will

maintain a suitable temperature to prevent the

formation of unpleasant odors (+12°C). To activate/

deactivate press the Vacation mode button for

3 seconds. When the function is enabled, the

related symbol will light up and the temperature of

the refrigerator compartment will be set to a higher

setpoint (the temperature display will show the

new temperature setpoint of +12°C). Changing the

temperature setpoint will automatically deactivate the

function.

FAN

The Fan improves temperature distribution inside the

product, allowing better preservation of stored food.

By default, the fan is switched on. To switch off the

FAN press and hold Vacation

and Stop Alarm

buttons at the same time for 3 seconds until an

audible signal sounds and ProFresh icon will turn

off as confirmation that the fan has been switched off.

To switched on the FAN repeat the same procedure.

As a confirmation audible signal sounds and the icon

turns on.

FAST COOL indicator

ALARM indicator (see the below Alarms Table)

ON/STANDBY indicator

VACATION indicator

Printed in Italy 06/16 - Bauknecht

PROFRESH

This function automatically works to ensure the

optimal conditions to preserve the stored food. To

deactivate the

ProFresh, press and hold Vacation

and Stop Alarm buttons at the same time for 3

seconds until an audible signal sounds and ProFresh

icon turns off as confirmation that the feature has

been deactivated. To reactivate this function repeat

the same procedure.

Note: Deactivation of the function switch-off the FAN

in the fridge.

FRNL