Instruction for Use

Water Dispenser

If you did not flush the water system when the refrigerator was first installed,

dispense water into a container until you draw 8 to 12 L (2 to 3 gal.) or for

approximately 6 to 7 minutes after the water begins dispensing and discard.

The water you draw and discard will rinse out the pipes. Allow several hours

for the refrigerator to cool down and chill the water.

Dispensing Water

1. Hold a container under the dispenser while pressing the button.

2. Release the button to stop dispensing.

NOTE: Dispense enough water every week to maintain a fresh supply.

User preferences

The control centre allows you to set user preferences, if desired.