KRSM 9005/A+ KRSC 9005/A+ Assembly instructions
Before installing the refrigerator 4 Water connection 4 Electrical connection 5 Positioning and levelling your refrigerator 6 Removing the freezer door (A) 7 Removing the refrigerator door (B) 7 Fitting the freezer door (C) 8 Fitting the refrigerator door (D) 8 Horizontal alignment of freezer and refrigerator door (E) 9 Vertical alignment of freezer and refrigerator door (F) 9
Before installing the refrigerator Your new appliance is a FULL NO FROST model exclusively for domestic use, i.e. both refrigerator and freezer compartments are provided with an automatic defrosting function. This manual contains indications and warnings for correct and safe installation of the appliance - read it carefully before starting installation operations. The model you have purchased may differ slightly with respect to some descriptions in this manual, since this manual covers several models.
Electrical connection Regulations require that the appliance is earthed. The manufacturer declines all liability for injury to persons or animals and for damage to property resulting from failure to observe the prescriptions. Make sure that the installation and the electrical connection are carried out by a qualified technician according to the manufacturer’s instructions and local safety regulations.
Positioning and levelling your refrigerator The refrigerator has two front wheels and two rear wheels at the base of each product on each side, and two adjustable feet at the front (see figure A). If the appliance seems unsteady or you want the doors to close easier, adjust the appliance’s tilt following the instructions below (depending on the model, as shown in the figures on the right). 1. Check the installation location to be sure you have at least 1 cm clearance on all sides including the top. 2.
Printed in Italy 03/08 5019 102 00387 n GB