Fiche produit *
Guide d'utilisation rapide Connectez l'appareil à l'arrivée d'eau et à l'alimentation électrique (voir manuel d'installation). Avant d'utiliser l'appareil, lisez attentivement le mode d'emploi qui l'accompagne. 훽 훾 ڹ 훿 COMPARTIMENT CONGÉLATEUR P. Distributeur automatique de glace Q. Éclairage intérieur R. Clayettes en verre S. Bac T. Bac U. Bac à glaçons V. Balconnets COMPARTIMENT RÉFRIGÉRATEUR A. Éclairage intérieur B. Clayettes C.
- Sensor (Fonction Sensor) Cette fonction s'active automatiquement pour signaler que l'appareil est en train de fonctionner pour atteindre rapidement les conditions de conservation optimales. - Filtre à eau La couleur du symbole indique l'état du filtre. Vert : filtre neuf Bleu : filtre en bon état Rouge (fixe) : filtre en fin de vie. Rouge (clignotant) : filtre à remplacer. Après avoir remplacé le filtre, appuyez sur la touche "Reset filter/alarm" jusqu'à ce que le symbole redevienne vert.
- Child Lock (Sécurité enfants) Pour verrouiller/déverrouiller les touches du bandeau de commande et le distributeur d'eau/de glace, appuyez simultanément sur les touches "Reset filter/alarm" et "Vacation mode", jusqu'à ce que le symbole s'affiche et qu'un signal sonore soit émis. - Reset Filter Alarm (Touche d'acquittement des alarmes) Appuyez sur la touche "Reset Filter/Alarm" pour acquitter les alarmes sonores. - Alarme Dysfonctionnement Voir le paragraphe "Ce qu'il convient de faire si ...".
Ce qu'il convient de faire si… Causes possibles Solutions Avant de contacter le Service Après-vente, essayez de résoudre le problème en vous aidant des indications ci-après. L'appareil est bruyant Le bandeau de commande est éteint et/ou l'appareil ne fonctionne pas Les bruits de l'appareil sont normaux, car les ventilateurs et le compresseur dont il est équipé s'allument et s'éteignent automatiquement.
Ce qu'il convient de faire si… Causes possibles Solutions La température à l'intérieur des Les causes pourraient être variées. compartiments n'est pas assez froide Vérifiez : • que les portes se ferment correctement. • que l'appareil n'est pas installé à proximité d'une source de chaleur. • que les ouvertures de ventilation ne sont pas obstruées, empêchant la libre circulation de l'air.
Ce qu'il convient de faire si… Causes possibles Solutions Alarme Black-out. Elle s'active en cas de coupure de courant prolongée ayant provoqué une augmentation de la température du compartiment congélateur. La température clignotant sur l'afficheur est la température la plus élevée ayant été atteinte pendant la coupure de courant. Pour désactiver le signal sonore, appuyez sur le bouton d'acquittement des alarmes. Contrôlez l'état des aliments avant de les consommer.
Ce qu'il convient de faire si… Le distributeur ne distribue pas la glace quand vous appuyez sur le levier. Causes possibles Solutions Il est normal que cela ne fonctionne pas si la porte du congélateur est ouverte, ou si le bac à glace n'est pas installé correctement. Fermez la porte du congélateur et/ou vérifiez si le bac à glace est installé correctement.
Printed in Italy 06/10 5019 715 01002 n F TM *BIEN PENSÉ. BIEN FABRIQUÉ.