Cycle control knob and temperature selector Model and serial (under LARGECAPAMYSINGLESPEED AUTOMATIC WASHER LA34ooxT lid)
Contents Important Safety Instructions.. . . .. .. Operating Instructions Starting your washer . .. What happens in each cycle Other Operating Instructions Rinse and spin . . . Drain and spin . . . If You Need Service Or Assistance. . .. Whirlpool Automatic Washer Warranty. . . 01990 Whirlpool Corporation Page 3 4 5 7 7 8 12 Thank you for buying a Whirlpool appliance. Please complete and mail the Owner Registration Card provided with this product Then complete the form below.
ImportantSafetyInstructions l l l l l l l the wash water. These substances Read all instructions before give off vapors that can create a using the washer. FIRE HAZARD or EXPLOSION. NEVER wash items cleaned, l If hot water has not been used washed, soaked in or spotted with recently (usually 2 weeks or longer), wax, paint, gasoline, or flammable hydrogen gases may build up in the fluids in the washer. The fumes water heater and the hot water pipes.
OperatingInstructions Startingyourwasher Be sure to measure and add detergent, then place a sorted load in the washer before starting it. 1. Select cycle and wash time Start the washer l Push in the Cycle Control Knob and turn it clockwise. l Stop when the indicator on the knob’s outer ring points to the number in the wash cycle you want. The numbers are minutes of wash time. NOTE: The washer will fill only when the Cycle Control Knob points to a FILL area.
3. Select a water level Setting the washer to fill with less water also sets it for shorter wash time (6 minutes). - Push the Cycle Control Knob in and turn it clockwise to a FILL area in the REGULAR HEAVY Cycle. - Pull the Cycle Control Knob out; the washer will start to fill. -When the washer reaches the desired water level, push in the Cycle Control Knob and slowly turn until it points to the 6-minute mark in the REGULAR HEAVY Cycle. Pull out the Cycle Control Knob to start the washer.
Operating Continued Instructions Regular/Heavy Cycle A cycle for sturdily constructed that are heavily soiled. fabrics to Selected Level Short Cycle Use for delicate items that need short wash and spin time. Wash nylon hose or pantyhose in a net laundry bag. to Selected Level 2 Minutes, High Speed The washer will pause briefly throughout each cycle. These pauses are normal. They allow for the reversing of the motor and normal washer operation.
OtherOperatingInstructions Rinseandspin When using extra detergent for heavily soiled clothes, or washing special-care items, you may want an extra rinse and spin. 1. Push Cycle Control Knob in. 2. Turn clockwise to one of the dots on the dial, as illustrated. 3. Pull Cycle Control Knob out. The washer will fill to selected level, agitate 2 minutes, drain and spin. Drainandspin A drain and spin may help shorten drying times for some heavy fabrics or special-care items by removing excess water. 1.
If YouNeedServiceOrAssistance We suggestyou follow thesesteps: 1. Before calling for assistance... Performance problems often result from little things you can find and fix yourself without tools of any kind. It your washer does not fill: .
4. If you need replacement FSPparts:.. FSP is a registered trademark of Whirlpool Corporation for quality parts. Look for this symbol of quality whenever you need a replacement part for your Whirlpool appliance. FSP replacement parts will fit right and work right, because they are made to the same exacting specifications used to build every new Whirlpool appliance. To locate FSP replacement parts in your area, refer to Step 3 or call the Whirlpool COOL-LINE service assistance number in Step 2. 5.
Notes 10
Notes
WHIRLPOOC AutomaticWasherWarranty LENGTH OF WARRANTY WHIRLPOOL WILL PAY FOR FULL ONE-YEAR WARRANTY From Date of Purchase FSP@ replacement parts and repair labor to correct defects in materials (including top and lid rust) or workmanship. Service must be provided by an authorized Whirlpools” service company. LIMITED FIVE-YEAR WARRANTY From Date of Purchase FSP replacement parts for any part of gearcase assembly if defective in materials or workmanship.
