Use& CareGuide Temperature sektor MAGIC CLEAN.
Contents Page Important Safety lnstructlona .. ...... 3 Operating lnstructlons Starting your washer ...... .......... ...... 4 What happens in each cycle ...... .... 5 Other Operatlng lnstructlons Extra rinse option .. ....................... 10 Rinse and spin ...... ...................... . 10 Drain and spin .............................. 10 soak cycle ..................... ............... 11 Liquid bleach dispenser ............... 11 Liquid fabric softener dispenser ... 12 MAGIC CLEAN@lint filter .......
ImportantSafetyInstructions To reduce the rlsk of fire, electrlcal shock, or Injury to persons when using your washer, follow bask precautions, lncludlng the followlng: Read all lnstructlons before uslng the washer. l NEVER wash items cleaned, washed, soaked in or spotted with wax, paint, gasoline, or flammable fluids in the washer. The fumes can create a FlRE HAZARD or EXPLOSION. ALWAYS hand launder and air dry fabrics containing these materials.
Operatinghtructions Starting your washer Be sure to measure and add detergent, then place a sorted bad in the washer 1. Select a load aloe Position the Load Size Selector al the setting that describes the size of bad you want to wash. l The selector can be set anywhere on or between EX SMALL (a few small items) and EX LARGE (a full bad). l To change the water level after the washer has started to fill, slide the selector to RESET, then to the desired water level.
3. Select cycle and wash time Start the washer l Push in the Cycle Control Knob and turn it cbckwtse. l Stop when the indicator on the knob’s outer ring points to the number in the wash cycle you want. The numbers are minutes of wash time. l Start the washer by pulling out the Cycle Control Knob. The washer will fill to the selected water level with the selected wash water temperature. The washer will bsgin agftating immediately after filling. Agitation can occur with the washer lid up or down.
Operatlng lnstructlons Contlnued Rsgular/Normal Cycle A cycle for regular bads of fabrics that are moderately soiled. Regular/Heavy Cycle A cycle for sturdily constructed fabrics that are heavily soiled.
Permanent Press/Normal Cycle A cycle designed for moderately soiled permanent press and some synthetic fabrics. The cool-down rinse helps keep wrinkles from setting into these items. Permanent Press/Ltght Cycle A cycle designed for lightly soiled permanent press and some synthetic fabrics. The ax&down rinse helps keep wrinkles from setting into these items.
Operatlng InstructIons Contlnued Kntts Gentle/Normal Cycle A cycle that gently washes and spins moderately soiled delicate items and washable knits. flu Knits GentMIght Cycle A cycle that gently washes and spins lightly soiled delicate items and washable knits.
Soak Cycle A cycle that combines brief periods of agitation and soak time to loosen and remove heavy soils and stains. Use recommended amount of detergent or presoak additive. The SOAK cycle should always be followed by a wash cycle. Super Wash Cycle Use for washing heavily soiled loads that require maximum soil removal. Double the amount of detergent recommended when using the SUPER WASH cycle.
OtherOperatingInstructions Extra rinse option You can automatically add an extra rinse and spin to the REGULAR cycle using the extra rinse option. l Touch Extra Rinse ON before the REGULAR cycle starts. The washer will automatically go to an extra rinse and spin after the REGULAR cycle is completed. l If no extra rinse and spin is wanted in the REGULAR cycle, touch Extra Rinse OFF. Make sure the OFF indicator is showing.
Soak cycle For best results, use warm water for pre-washing stained laundry. Hot water can set stains. 1. Use recommended amount of presoak product or detergent. 2. Push Cyde Control Knob in. 3. Turn dockwise until indicator points to a number next to SOAK 4. Pull Cycle Control Knob out The washer will start. 5. When the cycle is over, add detergent for the next selected wash cycle. The Soak cyde should always be followed by a wash cycle. NOTE: See the Laundry Guide for additional soaking information.
Other Operating contlnued lnstructlons liquid fabric softener dispenser 1. Add detergent and bad to the basket 2. Add liquid fabric softener to the dispenser using the amount recommended on the package. 3. Avoid dripping or spilling any fabric softener on the bad. 4. Dilute fabric softener with warm water. Add enough water to fill dispenser to the opening. 5. Start the washer. Diluted fabric softener will be added to the load during the final rinse. NOTE: Do not stop the washer during this time.
If YouNeedServiceOrAssistance We suggest you follow these steps: 1. Before calling for asslstanw ... Performance problems often result from little things you can find and fix yoursell without toots of any kind.
4. If you need FSP replacement parts*... FSP is a registered trademark of Whirlpool Corporation for quality parts. Look for this symbol of quality whenever you need a replacement part for your Whirlpool appliance. FSP replacement parts will fii right and work right, because they are made to the same exacting specifications used to build every new Whirlpool appliance. To locate FSP replacement parts in your area, refer to Step 3 or call the Whirlpool Consumer Assistance Center number in Step 2. 5.
Notes 15
WHIRLPOOL AutomaticWasherWarranty Awmb -..-. LENGTH OF WARRANTY WHIRLPOOL WILL PAY FOR FULL ONE-YEAR WARRANTY FSP repbcement parts and repair labor to correct defects in materials (induding top and lid rust) or workmanship. Service must be provided by an authorized WhirlpoolY” service company. From Date of Purchase LIMITED FIVE-YEAR WARRANTY From Date of Purchase FSP replacement parts for any part of gearcase assembly if defective in materials or workmanship.
