AUTOMATIC DRYERS Compact Electric Models LE4900XS (portable) LE4930XS Gas Model LG4931XS Microwave Ovens. Trash Compactors. Room AM Condltloners. Oehumldlflers. Aulomatlc Washers. Clothes Dryers. Freezers.
Parts and features , START BUllON CYCLE CONTROL KNOB t LINT SCREEN Remove the Consumer Buy Guide label before using your dryer. It will be easier to remove. Wipe out the dryer drum with a damp cloth to remove dust from storing or shipping. DRYER DRUM DOOR MODEL AND SERIAL NUMBER PLATE Copy your Model and Serial Numbers here When you need service or call with a question, have this information ready: 1. Complete Model and Serial Numbers (from the plate located as shown). 2. Purchase date from sales slip.
Additional Safety Instructions and your Responsibilities NEVER operate the dryer if... l it is not working right [i.e. noisy, too hot). l it is damaged. . parts are missing (i.e. door latch). l all panels are not in place. l the lint screen is loose, damaged or missing. FOR YOUR SAFETY If you smell gas: 1. Open windows. 2. Don’t touch electrical switches. 3. ;ztkeguish any open . 4. Immediately call your gas supplier.
Operating instructions Starting Your Dryer Before starting your dryer, be sure laundry is sorted and loaded properly (see your”Dryer Guide”). Be sure the door is tightly closed. 1 . Select Set a CYCLE Turn the Control Knob either way to point to the cycle and time setting you want. 3 . Push the START Button To stop the dryer, open the door (or turn the Control Knob to OFF). To restati the dryer, close the door, select cycle, if necessary, and push START. 2 .
I II Selecting a Cycle Dryer cycles are designed for the proper fabrics. This dryer has 3 cycles: REGULAR HEAVY-The heat is off during the last 5 minutes of tumbling. The load is cooled down for more comfortable handling. drying of different kinds of AIR - No heat. This cycle is useful when drying heat-sensitive items or when fluffing pillows and bedding or dusting sheers and curtains. PERMANENT PRESS -The heat is off during the last IU minutes of tumbling to help keep wrinkles from setting in.
Mixed loads To help reduce wrinkling, take the load from the dryer as soon as tumbling stops. This is very important for permanent press, knits and other synthetic fabrics. When drying a load with different kinds and weights of fabrics, use the cycle suggested forthe lightest fabrics. When the dryer stops, remove dry items and reset the control. . Suggested load sizes Use these load size recommendations for your compact dryer.
Lint screen Pull straight out. The lint screen is inside the dryer drum, on the back wall. Clean it before each load. A screen blocked by lint can increase drying time. 1. Use the finger holes to pull the lint screen straight out. 2. Lightly squeeze the body, as shown, while pulling the cover off. 3. Roll lint off the screen with your fingers. DO NOT rinse or wash the screen. Wet lint is hard to remove. Squeeze body; pull cover off. 4. Replace the cover on the body of the lint screen. 5.
Remove loose and sharp objects from DOCketS and cuffs before drvina pins, buckles, etc. Close metal . zippers. Wipe off all spills with a damp, soft cloth. Spills allowed to remain may dull or damage the finish. Never leave wet or damp in your dryer. laundry Sharp or heavy objects should never be put on or in the dryer. Check pockets for bolts, nuts, etc. Some pretreatment products can damage dials, consoles and finish. Do not use these products on or near your dryer.
Unplug power cord or turn off electrical power. For gas dryers, gas valve. close Clean lint screen. Voltage Requirements Dtyer Model LE4930XS operates on household current of 240 or 208 volts. Dryer times will be longer if 208 volt current is used. Power supply for Dryer Model LE4930XS Optional Installation Dryer Models LE4900XS and LG4931XS operate on household current of 120 volts. Drying times will be longer than for dryers that operate on 240 volts.
If you need service or assistance, we suggest you follow these five steps: L Before calling for assistance... Performance from little things yourself without IF YOUR DRYER problems often result you can find and fix tools of any kind. DOES NOT RUN: l l Is the gas turned on? If not, turn the Control Knob to OFF. Turn on gas. Wait 5 minutes. Reset controls and start. An electric dryer uses a circuit breaker or 2 fuses. If one fuse is blown, the dryer may run, but not heat.
II 2. If you need assistance?.. Call Whlrlpool COOL-LINE@ servIce assistance telephone number. Dial free trom anywhere In the U.S.: l-800-253-1301 and talk with one of our trained Consultants. The Consultant can instruct you in how to obtain satisfactory operation from your appliance or, if service is necessary, recommend a qualified service company in your area. 3. If you need service*...
WHIRLPOOI1” DRYER WARRANTY DROOl LENGTH OF WARRANTY WHIRLPOOL FULL ONE-YEAR WARRANTY From Date of Purchase FSP(“‘ replacement parts and repair labor to correct defects in materials or workmanship. Service must be provided by a franchised TECH-CARE” service company. WHIRLPOOL WILL PAY FOR WILL NOT PAY FOR A. Service calls to: 1. Correct the installation of the dryer. 2. Instruct you how to use the dryer. 3. Replace house fuses or correct house wiring or plumbing. 4. Replace light bulbs. B.
