Setup and user guide

ManualsBrandsWhirlpool ManualsDomestic AppliancesLFO3C22

Quick guide

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT

In order to receive a more complete assistance, please

Before using the appliance carefully read the Safety

Instruction.

PRODUCT DESCRIPTION

FIRST TIME USE

Wait at least two hours, after the installation, before connecting

the appliance to the power supply. Connect the appliance to the

power supply it starts the operation automatically. The ideal storage

temperatures for the food are preset in the factory.

After turning the appliance on, you must wait for 4-6 hours for the

correct storage temperature to be reached for a normally lled

appliance. Position the antibacterial anti-odour lter in the fan as

demonstrated in the lter packaging (if available). If the audible signal

sounds, it means that the temperature alarm has intervened: press the

button to switch o the acoustic alarms.

CONTROL PANEL

1. Temperature Display

2. Freezer temperature

3. Fast freeze - On/stand-by

4. Turning o the sound alarm

5. Black out alarm indicator

6. Fast cool- Vacation

7. Refrigerator temperature

3.4.6. 5.

1. 2.

SENSE FRESH CONTROL AND FREEZE CONTROL

The appliance is automatically able to quickly reach the

optimal internal preservation temperature. The 6

Sense Fresh Control

function enables to control also the humidity of the appliance. The

Sense Freeze Control keeps the temperature stable in the freezer

compartment. In order for it to function correctly, the fan must

also be turned on. It is possible to turn the function on/o (see Fan

description).

FAN*

The Fan improves temperature distribution inside the product,

allowing better preservation of stored food and reduction of excess

humidity. By default, the fan is switched on. You can turn the fan on/o

by pressing for 3 seconds Fast Freeze

and Freezer buttons. The

dispaly light will ash and a sound signal is activated one times if the

fan is ON or the dispaly light will ash and a sound signal is activated

two times if the fan is OFF. If the ambient temperature exceeds 27°C, or

if drops of water are present on the glass shelves, it is essential that the

fan is on to ensure the proper preservation of the food. Deactivation of

the fan allows energy consumption to be optimised.

Note: the fan restarts automatically after a power cut or after turning o the

appliance. Do not obstruct the air intake area with food items.

ANTIBACTERIAL FILTER*

Remove it from the box placed in the Fruit and vegetable drawer and

insert into the cover of fan. The replacement procedure is included in

the lter box.

ON/STANDBY

Press the button for 3 seconds to turn the appliance o. In Stand-by

mode, two dashes light up on the display. Press the button again

briey to reactivate the appliance.

Note: this does not disconnect the appliance from the power supply.

TEMPERATURE DISPLAY

The display may alternately show the refrigerator compartment

temperature (between 2°C and 8° C) or the temperature of the freezer

compartment (between -16°C and -24°C).

FRIDGE COMPARTMENT TEMPERATURE

It is possible to set a dierent temperature of the appliance by pressing

the

button.

FAST COOL

Press the button

before placing a large quantity of fresh food in

the refrigerator compartment. When the function is turned on the icon

light up. The function turns o automatically after 6 hours, or manually

by pressing the button again.

TURNING OFF THE SOUND ALARM

To turn o the sound alarm, briey press the

button.

FREEZER COMPARTMENT TEMPERATURE

It is possible to set a dierent temperature of the appliance by pressing

the

button.

FAST FREEZE

Press the

button 24 hours before putting large quantities of food

to freeze in the freezing zone. When the function is turned on the

icon lights up. The function turns o automatically after 48 hours, or

manually by pressing the

button again.

VACATION

You can use this function in the event of your prolonged absence. Press

the button

for 3 seconds to turn the function on. The display will

show the temperature of the refrigerator compartment (+12°C) and

the icon will light up. After activating the function, remove the food

from the refrigerator compartment and keep both doors closed - the

refrigerator will maintain a suitable temperature to prevent odours

from forming. The freezer, however, remains at the set temperature. To

turn o the function press the botton

for 3 seconds.

* Available only on certain models

Summary of content (4 pages)

PAGE 1
EN Quick guide THANK YOU FOR BUYING A WHIRLPOOL PRODUCT In order to receive a more complete assistance, please register your product on www‌.‌whirlpool‌.‌eu/‌register Before using the appliance carefully read the Safety Instruction. PRODUCT DESCRIPTION FIRST TIME USE Wait at least two hours, after the installation, before connecting the appliance to the power supply. Connect the appliance to the power supply it starts the operation automatically.
PAGE 2
STOP FROST SYSTEM* The STOP FROST SYSTEM facilitates the defrost procedure for the freezer compartment. The STOP FROST accessory is designed to collect some of the frost that forms in the freezer compartment and it is easy to remove and clean, therefore reducing the time needed to defrost the freezer compartment. PROCEDURE TO CLEAN THE STOP FROST ACCESSORY 1. Open the freezer compartment door and remove the upper drawer. 2.
PAGE 3
REMOVING DRAWER AND “SLIDING TRAY” (REMOVABLE SHELF) 1 2 1 2 1 1 2 FLAP BALCONY (COMPONENT THAT CAN BE POSITIONED AT DIFFERENT HEIGHTS) A B C Flap Balcony FRESH BOX 0°* The drawer is specifically designed to maintain a low temperature to preserve fresh food for longer time (for example , fresh pasta, sour cream, pesto/salsa,homemade preparation,pastry cream, pudding, cream cheese, cold cuts, desserts, meat and fish).
PAGE 4
TROUBLESHOOTING What to do if... Possible reasons Solutions The control panel is switched off, the appliance does not work. The appliance may be in On‌/‌Stand‑by mode. There may be an appliance power supply problem. Turn the appliance on pressing the On/Stand-by button. Check that: • there is not a power outage; • the plug is properly inserted in the power socket and the mains double-pole switch (if present) is in the correct position (i.e.