Operating instructions DISHWASHER EN English,1 FR Français, 15 DE Deutsch, 29 Contents EN Product Fiche, 2 Precautions and advice 3 ES Español, 43 CS Česky, 57 SK Slovensky, 71 General safety Disposal Saving energy and respecting the environment Installation and Assistance, 4-5 Positioning and levelling Connecting the water and electricity supplies Advice regarding the first wash cycle Technical data Assistance Description of the appliance, 6 LSB 7M116 Overall view Control panel Loading the
Product Fiche EN Product Fiche Brand HOTPOINT ARISTON Model LSB 7M116 Rated capacity in standard place settings (1) 14 Energy efficiency class on a scale from A+++ (low consumption) to D (high consumption) A+ Energy consumption per year in kWh (2) 293.0 Energy consumption of the standard cleaning cycle in kWh 1.03 Power consumption of the off-mode in W 0.5 Power consumption of the left-on mode in W 5.0 Water consumption per year in litres (3) 3080.
Precautions and advice This appliance was designed and manufactured in compliance with international safety standards The following information has been provided for safety reasons and should therefore be read carefully. Keep this instruction manual in a safe place for future reference. If the appliance is sold, given away or moved, please ensure the manual is kept with the machine. Please read these instructions carefully: they contain important information on installation, use and safety.
Installation EN Keep this instruction manual in a safe place for future reference. If the appliance is sold, given away or moved, please ensure the manual is kept with the machine, so that the new owner may benefit from the advice contained within it. Please read this instruction manual carefully: it contains important information regarding the safe installation, use and maintenance of the appliance.
Electrical connection Before inserting the plug into the electrical socket, make sure that: • The socket is earthed and complies with current regulations. • The socket can withstand the maximum load of the appliance, which is indicated on the data plate located on the inside of the door (see chapter entitled Description of the appliance). • The power supply voltage falls within the values indicated on the data plate on the inside of the door. • The socket is compatible with the plug of the appliance.
Description of the appliance EN Overall view 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Upper rack Upper sprayer arm Tip-up dispensers Rack height adjuster Lower rack Lower sprayer arm Washing filter Salt dispenser Detergent dispenser, rinse-aid dispenser and Active Oxygen device* Data plate Control panel*** Control panel Indicator light Drying and Delayed Start 6h. Button and indicator light Delayed start Indicator light Washing and Delayed Start 3h. Indicator light Wash Cycle End and Delayed Start 9h.
Loading the racks Tips Before loading the racks, remove all food residues from the crockery and empty liquids from glasses and containers. No preventive rinsing is needed under running water. Arrange the crockery so that it is held in place firmly and does not tip over; and arrange the containers with the openings facing downwards and the concave/convex parts placed obliquely, thus allowing the water to reach every surface and flow freely.
EN Tip-up compartments with adjustable position The side tip-up compartments can be positioned at three different heights to optimize the arrangement of crockery inside the rack. Wine glasses can be placed safely in the tip-up compartments by inserting the stem of each glass into the corresponding slots.
Start-up and use Starting the dishwasher 1. Turn the water tap on. 2. Press the ON/OFF button: 3. Open the door and pour in a suitable amount of detergent. 4. Load the racks (see Loading the racks) and shut the door. 5. Select the wash cycle by turning the WASH CYCLE SELECT knob clockwise: align the notch in the knob with the number/symbol representing the desired wash cycle. The START/PAUSE indicator light will go on. 6. Select the wash options* (see Special wash cycles and options.) 7.
Wash cycles EN Wash-cycle data is measured under laboratory conditions according to European Standard EN 50242. Based on the different conditions of use, the wash-cycle duration and data can change. The number and type of wash cycles and options may vary depending on the dishwasher model.
Special wash cycles and Options Notes: Optimum performance levels when using the “Fast" and "Express 40’” cycles can be achieved by respecting the specified number of place settings. To reduce consumption even further, only run the dishwasher when it is full. Note for Test Laboratories: for information on comparative EN testing conditions, please send an email to the following address: ASSISTENZA_EN_LVS@indesitcompany.
Rinse aid and refined salt EN Only use products which have been specifically designed for dishwashers. Do not use table/industrial salt or washing-up liquid. Follow the instructions given on the packaging. If using a multi-functional product it is not necessary to add any rinse aid. However, we recommend that you add salt, especially if you live in an area where the water is hard or very hard. (Follow the instructions given on the packaging).
Care and maintenance Shutting off the water and electricity supplies • Turn off the water tap after every wash cycle to avoid leaks. • Always unplug the appliance when cleaning it and when performing maintenance work. Cleaning the dishwasher • The external surfaces of the machine and the control panel can be cleaned using a non-abrasive cloth which has been dampened with water. Do not use solvents or abrasive products.
Troubleshooting EN Your dishwasher may not work properly. Before contacting the Service Centre check if the problem can be solved by going through the following list. Problem: Possible causes / Solutions: The dishwasher cannot be started or controlled. • S witch off the appliance by pressing the ON/OFF button. Switch it back on after approximately one minute and reset the program. • The appliance has not been plugged in properly. • The dishwasher door has not been shut properly.
Mode d’emploi FR Français, 15 LAVE-VAISSELLE Sommaire FR Fiche de produit, 16 Précautions et conseils, 17 Sécurité générale Mise au rebut Economies et respect de l’environnement Installation, 18-19 Mise en place et mise à niveau Raccordements eau et électricité Caractéristiques techniques Conseils pour le premier lavage Service Description de l’appareil, 20 Vue d’ensemble Tableau de bord LSB 7M116 Charger les paniers, 21-22 Panier inférieur Panier supérieur Panier à couverts Plateau range-couverts
Fiche de produit FR Fiche de produit Marque HOTPOINT ARISTON Modèle LSB 7M116 Capacité nominale dans un environnement standard (1) 14 Classe énergétique sur une échelle de A+++ (faible consommation) à D (consommation élevée) A+ Consommation d''énergie par année en kWh (2) 293.0 Consommation d''énergie du cycle de lavage standard en kWh 1.03 Consommation d''energie en mode "off" en W 0.5 Consommation d''energie en mode "on" en W 5.0 Consommation d''eau par an en litres (3) 3080.
Précautions et conseils Cet appareil a été conçu et fabriqué conformément aux normes internationales de sécurité. Ces consignes sont fournies pour des raisons de sécurité, il faut les lire attentivement. Conserver ce mode d’emploi pour pouvoir le consulter à tout moment. En cas de vente, de cession ou de déménagement, s’assurer qu’il accompagne bien l’appareil. Lire attentivement les instructions : elles fournissent des conseils importants sur l’installation, l’utilisation et la sécurité de l’appareil.
Installation FR Conserver ce mode d’emploi pour pouvoir le consulter à tout moment. En cas de vente, de cession ou de déménagement, s’assurer qu’il accompagne bien l’appareil. Lire attentivement les instructions: elles contiennent des conseils importants sur l’installation, l’utilisation et la sécurité de l’appareil. En cas de déménagement, transporter l’appareil verticalement; si besoin est, l’incliner sur le dos.
Raccordement électrique Avant de brancher la fiche dans la prise de courant, s’assurer que: • la prise dispose de mise à la terre et est conforme aux normes; • la prise est bien apte à supporter la puissance maximale de l’appareil reportée sur la plaque signalétique fixée à la contre-porte (voir paragraphe Description du lave-vaisselle); • la tension d’alimentation est bien comprise entre les valeurs figurant sur la plaque signalétique de la contre-porte; • la prise est bien compatible avec la fiche de l’ap
Description de l’appareil FR Vue d’ensemble 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Panier supérieur Bras de lavage supérieur Clayettes rabattables Réglage hauteur du panier Panier inférieur Bras de lavage inférieur Filtre lavage Réservoir à sel Bacs à produit de lavage, réservoir à produit de rinçage et dispositif Oxygène Actif* Plaque signalétique Bandeau de commandes*** Tableau de bord Voyant séchage et départ différé 6h. Voyant lavage et départ différé 3h. Voyant fin de programme et départ différé 9h.
Charger les paniers Conseils Avant de charger les paniers, débarrasser la vaisselle des déchets plus importants et vider les verres et autres récipients. Pas besoin de rincer préalablement à l'eau courante.
FR Clayettes rabattables à inclinaison variable Les clayettes latérales peuvent être placées à trois hauteurs différentes afin d’optimiser la disposition de la vaisselle dans le panier. Les verres à pied peuvent être placés en position stable sur les clayettes rabattables en insérant la tige de leurs pieds dans les fentes prévues à cet effet.
Mise en marche et utilisation Mettre en marche le lave-vaisselle Charger le produit de lavage 1. Ouvrir l’arrivée d’eau. 2. Appuyer sur la touche ON-OFF : 3. Ouvrir la porte et doser le produit de lavage. 4. Charger les paniers (voir Charger les paniers) et fermer la porte. 5. Sélectionner le programme désiré en tournant le bouton Un bon résultat de lavage dépend aussi d’un bon dosage du produit de lavage. Un excès de produit de lavage ne lave pas mieux et pollue l’environnement.
Programmes FR Les données des programmes sont mesurées dans des conditions de laboratoire selon la norme européenne EN 50242. Selon les différentes conditions d’utilisation, la durée et les données des programmes peuvent être différentes. Le nombre ainsi que les types de programmes et d’options varient selon le modèle de lave-vaisselle.
Programmes spéciaux et Options Remarque : pour obtenir des performances optimales avec les programmes « Fast et Express 40' » il est conseillé de respecter le nombre de couverts indiqué. Pour consommer moins, utiliser le lave-vaisselle pleine charge. Note pour les laboratoires d’essai : pour toutes informations sur les conditions d’essai comparatif EN, s’adresser à : ASSISTENZA_EN_LVS@indesitcompany.
Produit de rinçage et sel régénérant FR N’utiliser que des produits de lavage spéciaux lavevaisselle. Ne pas utiliser de sel alimentaire ou industriel ni de produits vaisselle pour lavage à la main. Se conformer aux instructions reportées sur l’emballage. En cas d’utilisation d’un produit multifonction, pas besoin d’ajouter de produit de rinçage mais nous conseillons par contre d’ajouter du sel, surtout en cas d’eau dure ou très dure. (Se conformer aux instructions reportées sur l’emballage).
Entretien et soin Coupure de l’arrivée d’eau et du courant • Fermer le robinet de l'eau après chaque lavage pour éviter tout risque de fuites. • Débrancher la fiche de la prise de courant lors du nettoyage de l’appareil et pendant tous travaux d’entretien. Nettoyer le lave-vaisselle • Pour nettoyer l’extérieur et le bandeau de commande, utiliser un chiffon humide non abrasif. N’utiliser ni solvants ni détergents abrasifs.
Anomalies et remèdes FR Il peut arriver que l’appareil ne fonctionne pas bien. Avant d’appeler le Service de dépannage, contrôler s’il ne s'agit pas par hasard d’un problème facile à résoudre à l’aide de la liste suivante. Anomalies : Causes / Solutions possibles : Le lave-vaisselle ne démarre pas ou n’obéit pas aux commandes • Eteindre l’appareil à l'aide de la touche ON-OFF, rallumer au bout d’une minute environ et sélectionner à nouveau le programme.
Gebrauchsanleitung GESCHIRRSPÜLER DE Deutsch, 29 Inhaltsverzeichnis Datenblatt, 30 Vorsichtsmaßregeln und Hinweise, 31 Allgemeine Sicherheit Entsorgung Energie sparen und Umwelt schonen Installation und Kundendienst, 32-33 Positionierung und Nivellierung Wasser- und Elektroanschlüsse Technische Daten Hinweise zur ersten Inbetriebnahme Kundendienst Beschreibung Ihres Geschirrspülers, 34 Geräteansicht Schalterblende LSB 7M116 Körbe beladen, 35-36 Geschirrspüler-Unterkorb Geschirrspüler-Oberkorb Besteckk
Datenblatt DE Datenblatt Marke HOTPOINT ARISTON Modell LSB 7M116 Nennkapazität in Standardgedecken für den Standardreinigungszyklus (1) 14 Energieeffizienzklasse (A+++ niedriger Verbrauch) bis D (hoher Verbrauch) A+ Energieverbrauch pro Jahr in kWh (2) 293.0 Energieverbrauch Standardreinigungszyklus in kWh 1.03 Gewichtete Leistungsaufnahme im Aus-Zustand in W 0.5 Gewichtete Leistungsaufnahme im unausgeschalteten Zustand in W 5.0 Wasserverbrauch pro Jahr in Liter (3) 3080.
Vorsichtsmaßregeln und Hinweise Das Gerät wurde nach den strengsten internationalen Sicherheitsvorschriften entworfen und gebaut. Nachstehende Hinweise werden aus Sicherheitsgründen geliefert und sollten aufmerksam gelesen werden Bewahren Sie diese Bedienungsanleitung bitte sorgfältig auf, damit Sie sie jederzeit zu Rate ziehen können. Im Falle eines Verkaufs, einer Übergabe oder eines Umzugs muss sie das Gerät stets begleiten.
Installation - Kundendienst DE Im Falle eines Umzugs sollte das Gerät möglichst in vertikaler Position transportiert werden, falls erforderlich, neigen Sie das Gerät zur Rückseite hin. Positionierung und Nivellierung 1. Nehmen Sie das Verpackungsmaterial ab und prüfen Sie Ihr Gerät auf eventuelle Transportschäden. Schließen Sie das Gerät im Falle einer Beschädigung bitte nicht an, sondern fordern Sie den Kundendienst an.
Technische Daten Abmessungen Breite 59,5 cm Höhe 82 cm Tiefe 57 cm Fassungsvermögen 14 Maßgedecke Wasserversorgungsdruck 0,05 ÷ 1MPa (0,5 ÷10 bar) 7,25 – 145 psi Versorgungsspannung Siehe Typenschild Maximale Leistungsaufnahme Siehe Typenschild Schmelzsicherung Siehe Typenschild Dieses Gerät entspricht folgenden EG-Richtlinien: - 2006/95/EWG (Niederspannung); - 2004/108/EWG (elektromagnetische Verträglichkeit) -2009/125/EG (Comm. Reg.
Beschreibung des Gerätes DE Geräteansicht 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Geschirrspüler-Oberkorb Oberer Sprüharm Hochklappbare Ablagen Einstellung der Korbhöhe Geschirrspüler-Unterkorb Unterer Sprüharm Spülsiebe Salzbehälter Spülmittelkammern, Klarspülerbehälter und Ozonvorrichtung Active Oxigen* Typenschild Schalterblende*** Schalterblende Anzeigeleuchte Trocknen und Startzeitvorwahl 6h.
Beladen der Körbe Hinweise Bevor Sie das Geschirr in den Geschirrspüler einräumen, befreien Sie es von Speiserückständen und entleeren Sie Gläser und Behälter von Flüssigkeitsresten. Es ist nicht notwendig, das Geschirr unter fließendem Wasser vorzuspülen. Stellen Sie das Geschirr so ein, dass es fest steht und nicht umfallen kann.
DE Verstellbare Ablagen Die seitlichen Ablagen können auf drei verschiedenen Höhen positioniert werden, um beim Einräumen des Geschirrs den Platz im Korb optimal auszunutzen. Stielgläser können an den Ablagen stabilisiert werden, indem sie mit dem Stiel in die vorgesehene Aussparung gestellt werden Der Oberkorb kann in der Höhe verstellt werden: stellen Sie ihn in die oberste Position, wenn Sie großes Geschirr in den Unterkorb einräumen wollen.
Inbetriebsetzung und Gebrauch Starten des Geschirrspülers 1. Öffnen Sie den Wasserhahn. 2. Drücken Sie die ON/OFF-Taste : 3. Öffnen Sie die Geschirrspülertür und dosieren Sie das Spülmittel. 4. Befüllen Sie die Geschirrspülerkörbe(siehe Körbe beladen) und schließen Sie die Gerätetür. 5. Drehen Sie zur Auswahl des Programms den DrehknopfPROGRAMMWAHL nach rechts, bis die Kerbe mit dem gewünschten Programmsymbol bzw. der Programmnummer übereinstimmt. Die Anzeigeleuchte der Taste START/PAUSE leuchtet auf. 6.
Programme DE Die Programmdaten sind Labormessdaten, die gemäß der europäischen Vorschrift EN 50242 erfasst wurden. Je nach den unterschiedlichen Einsatzbedingungen können die Dauer und die Daten der Programme anders ausfallen. Die Anzahl und die Art der Spülprogramme und -optionen sind abhängig vom jeweiligen Geschirrspülermodell.
Sonderprogramme und Optionen Hinweis: Die optimale Leistung der Programme "Schnell und Express 40´" ist dann gewährleistet, wenn die Anzahl der angegebenen Maßgedecke eingehalten wird. Für einen geringeren Verbrauch sollte die Maschine voll beladen werden. Hinweis für die Prüflabors: Informationen hinsichtlich der Bedingungen des EN-Vergleichstests sind unter nachfolgender Adresse anzufordern: ASSISTENZA_EN_LVS@indesitcompany.
Klarspüler und Regeneriersalz DE Verwenden Sie bitte nur Spezialspülmittel für Geschirrspüler. Verwenden Sie bitte kein Koch- oder Industriesalz und auch keine Handspülmittel. Bitte befolgen Sie die auf der Verpackung befindlichen Anweisungen. Sollten Sie ein Multifunktionsprodukt verwenden, ist ein Hinzufügen von weiterem Klarspüler nicht erforderlich. Der Zusatz von Regeneriersalz ist jedoch ratsam, besonders bei hartem oder sehr hartem Wasser.
Reinigung und Pflege Abstellen der Wasser- und Stromversorgung • Drehen Sie den Wasserhahn nach jedem Spülgang zu, um Schäden durch eventuelles Austreten von Wasser auszuschließen. • Ziehen Sie den Netzstecker aus der Steckdose, bevor Sie Ihren Geschirrspüler reinigen oder Wartungsmaßnahmen getroffen werden. Reinigung des Geschirrspülers • Die Gehäuseteile und die Bedienblende können mit einem mit Wasser angefeuchteten, weichen Tuch gereinigt werden. Vermeiden Sie Löse- und Scheuermittel.
Störungen und Abhilfe DE Gerätestörung Bevor Sie sich an den Technischen Kundendienst wenden, vergewissern Sie sich zuerst, ob es sich nicht um eine Kleinigkeit handelt, die Sie selbst beheben können. Ziehen Sie hierzu nachstehendes Verzeichnis zu Rate. Störungen: Mögliche Ursachen/Lösung : Die Spülmaschine startet nicht oder reagiert nicht auf die Bedienungseingaben.
Manual de Instrucciones ES Español, 43 LAVAVAJILLAS Sumario Ficha del producto, 44 Precauciones y consejos, 45 Seguridad general Eliminación Ahorrar y respetar el medio ambiente Instalación y asistencia, 46-47 Colocación y nivelación Conexiones hidráulicas y eléctricas Datos técnicos Advertencias para el primer lavado Asistencia Descripción del aparato, 48 LSB 7M116 Vista de conjunto Panel de mandos Cargar los cestos, 49-50 Cesto inferior Cesto de los cubiertos Cesto superior Regulación del cesto sup
Ficha del producto ES Ficha del producto Marca HOTPOINT ARISTON Modelo LSB 7M116 Capacidad nominal en número de cubiertos estándar (1) 14 Clase de eficiencia energética sobre una escala de A+++ (bajo consumo) a D (alto consumo) A+ Consumo energético anual en kWh (2) 293.0 Consumo energético del ciclo de lavado estándar en kWh 1.03 Consumo de potencia en el modo apagado en W 0.5 Consumo de potencia en el modo espera en W 5.0 Consumo de agua anual en litros (3) 3080.
Precauciones y consejos El aparato ha sido proyectado y fabricado en conformidad con las normas internacionales de seguridad Estas advertencias se suministran por razones de seguridad y deben ser leídas atentamente. Es importante conservar este manual para poder consultarlo en cualquier momento. En caso de venta, de cesión o de traslado, el manual debe permanecer junto al aparato. Lea atentamente las instrucciones: contienen información importante sobre la instalación, sobre el uso y sobre la seguridad.
Instalación y Asistencia Técnica ES En caso de traslado mantener el aparato en posición vertical; si fuera necesario inclinarlo, hacerlo hacia la parte posterior. Colocación y nivelación 1. Desembalar el aparato y comprobar que no haya sufrido daños durante el transporte. Si estuviera dañado, no conectarlo; llamar al revendedor. Conexión del tubo de descarga de agua Conectar el tubo de descarga, sin plegarlo, a una tubería de descarga con un diámetro mínimo de 4 cm.
Cinta anticondensación* Después de haber empotrado el lavavajillas, abra la puerta y pegue la cinta adhesiva transparente debajo de la superficie de madera para protegerla de una posible condensación. Advertencias para el primer lavado Después de la instalación, quite los tapones colocados en los cestos y los elementos elásticos de bloqueo del cesto superior (si existen). Inmediatamente antes del primer lavado, llene completamente de agua el depósito de sal y agregue aproximadamente 1 kg.
Descripción del aparato ES Vista de conjunto 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Cesto superior Rociador superior Cestos adicionales Regulación de la altura del cesto superior Cesto inferior Rociador inferior Filtro de lavado Depósito de sal Cubeta de detergente, depósito de abrillantador y dispositivo de Active Oxygen* Placa de características Panel de mandos*** Panel de mandos Piloto Secado y Comienzo retrasado 6h.
Cargar los cestos Sugerencias Antes de cargar los cestos, eliminar de la vajilla los residuos de alimentos y vaciar los vasos y las copas. No es necesario aclarar la vajilla con agua corriente. Disponer la vajilla de manera que quede firme y no se vuelque. Los recipientes deben colocarse con la abertura hacia abajo y las partes cóncavas o convexas en posición oblicua, para permitir que el agua alcance todas las superficies y fluya.
ES Cestos adicionales de posición variable Los cestos adicionales laterales se pueden colocar a tres alturas diferentes para optimizar la disposición de la vajilla en el cesto. Las copas se pueden colocar de forma estable en los cestos adicionales, introduciendo el pie en las ranuras correspondientes.
Puesta en funcionamiento y uso Poner en funcionamiento el lavavajillas 1. Abrir el grifo de agua. 2. Presione el botón ENCENDIDO-APAGADO: 3. Abra la puerta y dosifique el detergente. 4. Cargar los cestos (ver Cargar los cestos) y cerrar la puerta. 5. Seleccionar el programa girando el mando SELECCIÓN DE PROGRAMA en sentido horario: hacer coincidir la marca del selector con el número o el símbolo del programa. El testigo de la tecla INICIO/PAUSA se iluminará. 6.
Programas ES Los datos de los programas se obtienen en condiciones de laboratorio según la Norma Europea EN 50242. La duración y los datos de los programas pueden variar según las distintas condiciones de uso. El número y el tipo de programas y opciones varían según el modelo de lavavajillas.
Programas especiales y opciones Notas: las mejores prestaciones de los programas "Rápido y Express 40’" se obtienen preferiblemente respetando la cantidad de cubiertos indicada. Para consumir menos utilizar el lavavajillas a plena carga. Nota para los laboratorios de pruebas: para obtener información detallada sobre las condiciones de la prueba comparativa EN, escribir a la siguiente dirección: ASSISTENZA_EN_LVS@indesitcompany.
Abrillantador y sal regeneradora ES Utilizar sólo productos específicos para lavavajillas. No utilizar sal de cocina o industrial ni detergentes para lavar a mano. Seguir las indicaciones del envase. Si se utiliza un producto multifunción, no es necesario agregar abrillantador, pero se aconseja añadir sal, especialmente si el agua es dura o muy dura. (Seguir las indicaciones del envase.
Mantenimiento y cuidados Interrumpir el agua y la corriente eléctrica • Cerrar el grifo de agua después de cada lavado para prevenir el riesgo de pérdidas. • Desconectar la clavija de la toma de corriente para la limpieza y los trabajos de mantenimiento. Limpiar el lavavajillas • La superficie externa y el panel de control se pueden limpiar con un paño no abrasivo humedecido con agua. No utilizar disolventes ni productos abrasivos.
Anomalías y soluciones ES Puede suceder que el aparato no funcione. Antes de llamar al Servicio de Asistencia Técnica, controle que no se trate de un problema fácilmente solucionable con la ayuda de la siguiente lista. Anomalías: Posibles causas / Solución: El lavavajillas no arranca o no responde a los mandos. • A pagar la un minuto • La clavija • La puerta La puerta no se cierra. • S e disparó la cerradura; empuje enérgicamente la puerta hasta escuchar el característico sonido (clack).
Návod k použití MYČKA NÁDOBÍ CS Česky, 57 Obsah Informační list výrobku, 58 Opatření a rady, 59 Základní bezpečnostní pokyny Likvidace Jak ušetřit a brát ohled na životní prostředí Instalace, Servisní služba, 60-61 Ustavení a vyrovnání do vodorovné polohy Připojení k elektrické síti a k rozvodu vody Upozornění pro první mytí Technické údaje Servisní služba Popis zařízení, 62 Celkový pohled Ovládací panel LSB 7M116 Plnění košů, 63-64 Spodní koš Horní koš Nastavení výšky horního koše Třetí koš Spuště
Informační list výrobku CS Informační list výrobku Značka HOTPOINT ARISTON Model LSB 7M116 Kapacita počtu standardních sad nádobí (1) 14 Třída energetické účinnosti na stupnici A+++ (nejnižší spotřeba) až D (vysoká spotřeba) A+ Roční spotřeba energie v kWh (2) 293.0 Spotřeba energie standardního mycího cyklu v kWh 1.03 Spotřeba energie ve vypnutém stavu ve W 0.5 Spotřeba energie v režimu ponechání v zapnutém stavu ve W 5.0 Roční spotřeba vody v litrech za rok (3) 3080.
Opatření a rady Zařízení bylo navrženo a vyrobeno v souladu s platnými mezinárodními bezpečnostními předpisy. Tato upozornění jsou uváděna z bezpečnostních důvodů a je třeba si je pozorně přečíst. Pozorně si přečtěte uvedené pokyny: Obsahují důležité informace týkající se instalace, použití a bezpečnosti při práci. Při stěhování udržujte zařízení dle možností ve svislé poloze; dle potřeby je můžete naklonit na zadní stranu.
Instalace - Servisní služba CS Při stěhování udržujte zařízení dle možností ve svislé poloze; dle potřeby je můžete naklonit na zadní stranu. Ustavení a vyrovnání do vodorovné polohy 1. Po rozbalení zařízení zkontroluje, zda během přepravy nedošlo k jeho poškození. V případě, že je poškozeno, je nezapojujte a obraťte se na prodejce. Dbejte na to, aby hadice nebyla příliš ohnutá ani stlačená.
Pás proti tvorbě kondenzátu* Po vestavění myčky otevřete dvířka a přilepte pod dřevěnou polici průsvitný samolepicí pás, který bude polici chránit před případným kondenzátem. Upozornění pro první mytí Po instalaci odstraňte tampony umístěné na bubnech a přidržovací gumy na horním bubnu (jsou-li součástí). Bezprostředně před prvním mytím zcela naplňte vodou nádržku na sůl a přidejte přibližně 1 kg soli (viz kapitola Leštidlo a regenerační sůl): Je zcela běžným jevem, že voda přeteče.
Popis zařízení CS Celkový pohled 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Horní koš Horní ostřikovací rameno Sklopné držáky Mechanismus nastavení výšky koše Spodní koš Spodní ostřikovací rameno Mycí filtr Nádržka na sůl Vanička na mycí prostředek, nádržka na leštidlo a zařízení Active Oxigen* Štítek s parametry Ovládací panel*** Ovládací panel Kontrolka Sušení a Odložený start 6h. Tlačítko a kontrolka Start/ Pauza Tlačítko a kontrolka Odložený start Kontrolka Mytí a Odložený start 3h.
Plnění košů Doporučení: Před plněním košů odstraňte z nádobí zbytky jídla a vylijte ze sklenic a pohárů tekutiny, které v nich zůstaly. Není třeba provádět předběžné oplachování pod tekoucí vodou. Umístěte nádobí tak, aby zůstalo bez pohybu a nepřevrátilo se, aby nádoby zůstaly obráceny otvorem dolů a aby se vypouklé a vyduté části nacházely v šikmé poloze, což umožní vodě dostat se ke všem povrchům i odtékat. Dávejte pozor, aby víka, rukojeti, pánve a tácy nebránily otáčení ostřikovacích ramen.
CS Sklopné držáky s proměnlivou polohou Boční sklopné držáky lze umístit do tří odlišných výšek kvůli optimalizaci umístění nádobí v prostoru koše. Poháry lze umístit stabilně na sklopné držáky zasunutím stopky poháru do příslušných podélných otvorů. Horní koš je výškově nastavitelný dle potřeby: do horní polohy kvůli umístění neskladného nádobí; do spodní polohy kvůli využití prostorů sklopných nebo naklonitelných držáků a vytvoření většího prostoru směrem nahoru.
Uvedení do činnosti a použití Uvedení myčky do činnosti Dávkování mycího prostředku PROGRAMU ve směru hodinových ručiček: Nastavte rysku na ovladači na číslo nebo symbol zvoleného programu. Kontrolka tlačítka START/PAUZA se rozsvítí. 6. Zvolte volitelné funkce mytí*(viz Speciální programy a volitelné funkce). V závislosti na stupni znečištění lze dávkování přizpůsobit konkrétnímu případu použitím práškového nebo tekutého mycího prostředku.
Programy CS Údaje programů jsou naměřeny v laboratorních podmínkách v souladu s evropskou normou EN 50242. V závislosti na různých podmínkách použití může docházet ke změnám doby trvání a dat programů. Počet a druh programů a volitelných funkcí se mění v závislosti na modelu myčky. Sušení Volitelné funkce Doba trvání programu Spotřeba vody (l/cyklus) Spotřeba energie (kWh/ cyklus) Eko mytí Ano Odložený start – Poloviční náplň 03:10’ 11 1,03 Intenzivní mytí Aut.
Speciální programy a Volitelné funkce Poznámky: Nejlepších výsledků s programy „Rychlé mytí“ a „Express 40’“ je možné dosáhnout, když bude dle možností dodržen počet uvedených souprav. Pro menší spotřebu používejte myčku na nádobí s plnou náplní. Poznámka pro zkušební laboratoře: Pro informace o zkušebních podmínkách srovnávací zkoušky EN napište na adresu: ASSISTENZA_EN_LVS@indesitcompany.
Leštidlo a regenerační sůl CS Používejte pouze specifické mycí prostředky pro myčky nádobí. Nepoužívejte kuchyňskou ani průmyslovou sůl ani mycí prostředky pro mytí v rukou. Dodržujte pokyny uvedené na obalu. Používáte-li multifunkční produkt, není třeba přidávat leštidlo, avšak doporučuje se přidat sůl, zejména v případě, že je voda tvrdá nebo velmi tvrdá (dodržujte pokyny uvedené na obalu).
Údržba a péče Uzavření přívodu vody a vypnutí elektrického napájení • Po každém mytí uzavřete kohoutek přívodu vody, abyste se vyhnuli nebezpečí úniků. • Při čištění zařízení a během operací údržby odpojte zástrčku napájecího kabelu ze zásuvky elektrického rozvodu. Čištění myčky nádobí • Vnější povrch a ovládací panel se může čistit neabrazivním hadrem navlhčeným ve vodě. Nepoužívejte rozpouštědla ani abrazivní prostředky.
Poruchy a způsob jejich odstranění CS Může se stát, že zařízení nebude fungovat. Dříve, než se obrátíte na Servisní službu, zkontrolujte prostřednictvím následujícího seznamu, zda se nejedná o snadno odstranitelný problém. Poruchy: Možné příčiny / Řešení: Nedochází k uvedení myčky do chodu nebo myčka nereaguje na ovládací povely • Vypněte zařízení tlačítkem ZAPNOUT/VYPNOUT, opět jej zapněte po uplynutí přibližně jedné minuty a znovu nastavte požadovaný program.
Pokyny pre použitie UMÝVAČKA RIADU SK Slovensky, 71 Obsah Opis výrobku, 72 Opatrenia a rady, 73 Základné bezpečnostné pokyny Likvidácia Ako ušetriť a brať ohľad na životné prostredie Inštalácia, Servisná služba, 74-75 Ustavenie a vyrovnanie do vodorovnej polohy Pripojenie k elektrickej sieti a k rozvodu vody Upozornenia pre prvé umývanie Technické údaje Servisná služba Popis zariadenia, 76 Celkový pohľad Ovládací panel LSB 7M116 Plnenie košov, 77-78 Dolný kôš Košík na príbory Horný kôš Uvedenie do
Opis výrobku SK Opis výrobku Značka HOTPOINT ARISTON Model LSB 7M116 Kapacita počtu štandardných súprav riadu (1) 14 Trieda energetickej účinnosti na stupnici A+++ (najnižšia spotreba) až D (vysoká spotreba) A+ Ročná spotreba energie v kWh (2) 293.0 Spotreba energie štandardného umývacieho cyklu v kWh 1.03 Spotreba energie vo vypnutom stave vo W 0.5 Spotreba energie v režime ponechania v zapnutom stave vo W 5.0 Ročná spotreba vody v litroch za rok (3) 3080.
Opatrenia a rady Zariadenie bolo navrhnuté a vyrobené v súlade s platnými medzinárodnými bezpečnostnými predpismi. Tieto upozornenia sú uvádzané z bezpečnostných dôvodov a je potrebné si ich pozorne prečítať. Je veľmi dôležité uschovať tento návod kvôli prípadnému neskoršiemu nahliadnutiu. V prípade predaja, darovania alebo presťahovania zariadenia zabezpečte, aby návod zostal vždy jeho súčasťou.
Inštalácia a Servisná služba SK Pri prenášaní udržujte zariadenie podľa možností vo zvislej polohe; v prípade potreby ho môžete nakloniť na zadnú stranu. Ustavenie a vyrovnanie do vodorovnej polohy 1. Po rozbalení zariadenia skontrolujte, či počas prepravy nedošlo k jeho poškodeniu. Ak je poškodené, nezapájajte ho a obráťte sa na predajcu. Tlak v rozvode vody sa musí pohybovať v rozmedzí uvedenom v tabuľke Technických údajov (viď vedľa). Dbajte na to, aby hadica nebola príliš ohnutá alebo stlačená.
Po inštalácii zariadenia musí kábel elektrického napájania a zásuvka elektrického rozvodu zostať ľahko prístupné. Kábel nesmie byť ohnutý ani stlačený. V prípade poškodenia musí byť napájací kábel vymenený výrobcom alebo jeho strediskom Servisnej služby, aby sa predišlo akémukoľvek riziku. (Viď Servisná služba) Firma neponesie žiadnu zodpovednosť za následky spôsobené nerešpektovaním uvedených pokynov.
Popis zariadenia SK Celkový pohľad 1. 2. 3. 4. Horný kôš Horné ostrekovacie rameno Sklopné držiaky Nastavenie výšky horného koša 5. Spodný kôš 6. Dolné ostrekovacie rameno 7. Umývací filter 8. Nádobka na soľ 9. Vanička na umývací prostriedok, nádržka na leštidlo a zariadenie Active Oxigen* 10. Štítok s parametrami 11. Ovládací panel*** Ovládací panel Kontrolka Sušenie a Oneskorený štart 6h. Kontrolka Umývanie a Oneskorený štart 3h. Kontrolka Ukončenie programu a Oneskorený štart 9h.
Naplňte koše Rady Pred plnením odstráňte z riadu zvyšky jedla a vylejte z pohárov a z nádob tekutiny, ktoré v nich zostali. Oplachovanie pod tečúcou vodou nie je potrebné. Riad umiestnite tak, aby zostal bez pohybu, a aby sa neprevrátil. Nádoby musia byť umiestnené otvorom nadol a konkávne alebo konvexné časti musia byť umiestnené do šikmej polohy, aby sa voda mohla dostať k všetkým povrchom a potom z nich odtiecť.
SK Sklopné držiaky s premenlivou polohou Sklopné držiaky je možné umiestniť do troch rôznych výšok kvôli optimalizácii umiestnenia riadu v priestore koša. Poháre na stopke je možné umiestniť stabilne na sklopné držiaky, zasunutím stopky pohára do príslušných pozdĺžnych drážok.
Uvedenie do činnosti a použitie Uvedenie umývačky do činnosti Dávkovanie umývacieho prostriedku PROGRAMU v smere hodinových ručičiek: Nastavte rysku na ovládači na číslo alebo symbol zvoleného programu. Kontrolka tlačidla ŠTART/PAUZA sa rozsvieti. 6. Zvoľte voliteľné funkcie umývania* (viď Špeciálne programy a voliteľné funkcie). V závislosti na stupni znečistenia musí byť dávkovanie prispôsobené konkrétnemu prípadu s práškovým alebo tekutým umývacím prostriedkom.
Programy SK Parametre programov sú namerané v laboratórnych podmienkach, v súlade s európskou normou EN 50242. V závislosti na rôznych podmienkach použitia môže dochádzať k zmenám doby trvania a parametrov programov. Počet a druh programov a možností sa mení v závislosti od modelu umývačky. Sušenie Voliteľné funkcie Doba trvania programu Spotreba vody (l/cyklus) Spotreba energie (kWh/cyklus) Eco Áno Oneskorený štart – Polovičná náplň 03:10’ 11 1,03 Aut.
Špeciálne programy a Voliteľné funkcie Poznámky: Najlepšiu účinnosť programov “Rýchle umývanie” a “Express 40’” dosiahnete, ak podľa možností dodržíte množstvo uvedených súprav. Pre menšiu spotrebu používajte umývačku riadu s plnou náplňou. Poznámka pre Skúšobné laboratóriá: O informácie o podmienkach vykonania komparatívnej skúšky EN môžete požiadať na adrese_ ASSISTENZA_EN_LVS@indesitcompany.
Leštidlo a regeneračná soľ SK Používajte len špecifické umývacie prostriedky pre umývačky riadu. Nepoužívajte kuchynskú alebo priemyselnú soľ, ani umývacie prostriedky na umývanie v rukách. Dodržujte pokyny uvedené na obale. Ak používate viacúčelový prostriedok, nie je potrebné pridávať leštidlo, avšak odporúča sa pridať soľ, obzvlášť v prípade, keď je voda tvrdá alebo veľmi tvrdá. (Dodržujte pokyny uvedené na obale).
Údržba a starostlivosť Uzatvorenie prívodu vody a vypnutie elektrického napájania • Po každom umytí uzatvorte kohútik prívodu vody, aby ste zabránili jej úniku. • Pri čistení zariadenia a počas údržby odpojte zástrčku napájacieho kábla zo zásuvky elektrického rozvodu. Čistenie umývačky • Vonkajší povrch a ovládací panel môžu byť čistené neabrazívnou utierkou navlhčenou vo vode. Nepoužívajte rozpúšťadlá ani abrazívne prostriedky.
Poruchy a spôsob ich odstránenia SK 195112776.02 08/2013 jk - Xerox Fabriano Môže sa stať, že zariadenie nebude fungovať. Skôr ako sa obrátite na servisnú službu, skontrolujte, či sa nejedná o problém, ktorý je možné ľahko vyriešiť s použitím nasledovného zoznamu.