Operating instructions DISHWASHER EN English, 1 PL Polski, 15 Contents Product Fiche, 2 Precautions, advice and Assistance, 3-4 General safety Disposal Saving energy and respecting the environment Assistance Installation, 5-6 Positioning and levelling Connecting the water and electricity supplies Advice regarding the first wash cycle Technical data Ecodesign Regulation Description of the appliance, 7 Overall view Control panel LSTA+ 327 Loading the racks, 8 Lower rack Cutlery basket Upper rack Adju
EN Product Fiche Brand HOTPOINT/ARISTON Model LSTA+ 327 Rated capacity in standard place settings (1) 10 Energy efficiency class on a scale from A+++ (low consumption) to D (high consumption) A+ Energy consumption per year in kWh (2) 237.0 Energy consumption of the standard cleaning cycle in kWh 0.81 Power consumption of the off-mode in W 1.3 Power consumption of the left-on mode in W 3.0 Water consumption per year in litres (3) 2800.
Precautions, advice and Assistance This appliance was designed and manufactured in compliance with international safety standards The following information has been provided for safety reasons and should therefore be read carefully. Keep this instruction manual in a safe place for future reference. If the appliance is sold, given away or moved, please ensure the manual is kept with the machine. Please read these instructions carefully: they contain important information on installation, use and safety.
EN Phosphate-free and chlorine-free detergents containing enzymes • We strongly recommend that you use detergents that do not contain phosphates or chlorine, as these products are harmful to the environment. • Enzymes provide a particularly effective action at temperatures around 50°C. As a result detergents containing enzymes can be used in conjunction with low-temperature wash cycles in order to achieve the same results as a normal 65°C wash cycle.
Installation If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may be tilted onto its back. Positioning and levelling 1. Remove the appliance from all packaging and check that it has not been damaged during transportation. If it has been damaged, contact the retailer and do not proceed any further with the installation process.
EN Anti-condensation strip* After installing the dishwasher, open the door and stick the adhesive transparent strip under the wooden shelf in order to protect it from any condensation which may form. Advice regarding the first wash cycle After the installation, remove the stoppers from the racks and the retaining elastic elements from the upper rack, if any.
Description of the appliance Overall view EN 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.
Loading the racks EN Before loading the racks, remove all food residues from the crockery and empty liquids from glasses and cups. Arrange the crockery so that it is held in place firmly and does not tip over. After loading the appliance, check that the sprayer arms can rotate freely. Lower rack The lower rack can hold pans, lids, plates, salad bowls, cutlery, etc. as seen in the Loading examples.
Start-up and use Starting the dishwasher 1. Turn the water tap on. 2. Open the door and press the ON/OFF button: you will hear a short beep and the display and option indicator lights switch on. 3. Measure out the detergent (see below). 4. Load the racks (see Loading the racks). 5. Select the wash cycle in accordance with the type of crockery and its soil level (see Table of wash cycles), by pressing the P button. 6. Select the wash options (see adjacent information). 7.
Wash cycles EN Wash-cycle data is measured under laboratory conditions according to European Standard EN 50242. Based on the different conditions of use, the wash-cycle duration and data can change. The number and type of wash cycles and options may vary depending on the dishwasher model. Wash cycle selection instructions Environmentally-friendly wash cycle with low energy consumption levels, suitable for pans and dishes. Normally soiled pans and dishes. Standard daily wash cycle.
Special wash cycles and Options Notes: Optimum performance levels when using the “Daily and "Rapid” cycles can be achieved by respecting the specified number of place settings. To reduce consumption, only run the dishwasher when it is full. Note for Test Laboratories: for information on comparative EN testing conditions, please send an email to the following address: assistenza_en_lvs@indesitcompany.com Multi-functional tablets This option optimises washing and drying results.
Rinse aid and refined salt EN Only use products which have been specifically designed for dishwashers. Do not use table salt or industrial salt, or washing up liquid. Follow the instructions given on the packaging. If using a multi-functional product it is not necessary to add rinse aid; however, we recommend that you add salt, especially if you live in an area where the water is hard or very hard. Follow the instructions given on the packaging.
Care and maintenance Shutting off the water and electricity supplies • Turn off the water tap after every wash cycle to avoid leaks. • Always unplug the appliance when cleaning it and when performing maintenance work. Cleaning the dishwasher • The external surfaces of the machine and the control panel may be cleaned using a non-abrasive cloth which has been dampened with water. Do not use solvents or abrasive products.
Troubleshooting EN Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance. Problem: Possible causes/Solutions: The dishwasher does not start or cannot be controlled • Switch off the appliance by pressing the ON/OFF button, switch it back on after approximately one minute and reset the program. • The appliance has not been plugged in properly. • The dishwasher door has not been shut properly. The door won’t close • The lock was released.
Instrukcja obsługi ZMYWARKA PL Polski, 15 Spis treści PL Karta produktu, 16 Zalecenia i środki ostrożności, 17 Bezpieczeństwo ogólne Utylizacja Oszczędność i ochrona środowiska Instalacja i Serwis, 18-19 Ustawienie i wypoziomowanie Połączenie hydrauliczne i elektryczne Dane techniczne Przed pierwszym użyciem Serwis Ecodesign Regulation Opis urządzenia, 20 Widok ogólny Panel sterowania LSTA+ 327 Napełnianie koszy, 21 Kosz dolny Kosz górny Kosz na sztućce Regulacja górnego kosza Uruchomienie i użytk
Karta produktu PL Karta produktu Marka HOTPOINT ARISTON Nazwa modelu LSTA+ 327 Pojemność znamionowa, wyrażona liczbą standardowych kompletów naczyń (1) 10 Klasa efektywności energetycznej, skla od A+++ (niskie zużycie) do D (wysokie zużycie) A+ Zużycie energii w kWh rocznie (2) 237.0 Zużycie energii w standardowym cyklu zmywania w kWh 0.81 Zużycie energii w trybie wyłączenia i trybie czuwania w W 1,3 Zużycie energii w trybie włączenia i trybie czuwania w W 3.
Zalecenia i środki ostrożności Niniejsze urządzenie zostało zaprojektowane i wyprodukowane zgodnie z międzynarodowymi normami bezpieczeństwa. Poniższe ostrzeżenia podane zostały ze względów bezpieczeństwa i należy je uważnie przeczytać. Należy zachować niniejszą książeczkę instrukcji dla przyszłych konsultacji. W przypadku sprzedaży, odstąpienia lub przeprowadzki należy dopilnować, aby została przekazana wraz z urządzeniem nowemu właścicielowi.
Instalacja Serwis Techniczny W przypadku przenoszenia należy trzymać urządzenie w pozycji pionowej; w razie konieczności przechylić je do tyłu. PL Ustawienie i wypoziomowanie 1. Rozpakować urządzenie i sprawdzić, czy nie zostało uszkodzone podczas transportu. Jeśli okazałoby się uszkodzone, nie podłączać go, lecz skontaktować się ze sprzedawcą. Podłączenie węża odprowadzającego wodę Podłączyć przewód odprowadzający, nie zginając go, do przewodu kanalizacyjnego o średnicy minimum 4 cm.
Pasek antykondensacyjny* Po zabudowaniu zmywarki otworzyć drzwi i przykleić przezroczysty pasek samoprzylepny pod drewnianym blatem, aby zabezpieczyć go przed ewentualnymi skroplinami. Ostrzeżenia dotyczące pierwszego mycia Po zainstalowaniu, należy zdjąć elementy ochronne z koszy oraz gumki przytrzymujące kosz górny (jeśli je zastosowano).
Opis urządzenia Widok ogólny PL 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.
Napełnianie koszy Przed napełnieniem koszy usunąć z naczyń resztki żywności i opróżnić szklanki oraz kieliszki z pozostałych w nich płynów.Ustawić naczynia w taki sposób, aby nie poruszały się i i nie przewracały się. Po napełnieniu koszy sprawdzić czy spryskiwacze obracają się swobodnie. Nachylenie A Kosz dolny - Podnieść półeczkę, przesunąć lekko i ustawić w dowolnym nachyleniu. W dolnym koszu można umieszczać garnki, pokrywki, talerze, salaterki, sztućce itp.według Przykładów napełniania.
Uruchomienie i użytkowanie PL Uruchomienie zmywarki Dozowanie środka myjącego 1. Otworzyć zawór wody. 2. Otworzyć drzwi i nacisnąć przycisk ON-OFF: słychać krótki sygnał dźwiękowy, lampka kontrolna ON/OFF, wyświetlacz oraz lampki kontrolne opcjizapalająsię. 3. Dodać odpowiednią ilość środka myjącego (patrz poniżej). 4. Włożyć naczynia do koszy (patrz Napełnianie koszy). 5. Wybrać program w zależności od rodzaju naczyń i od stopnia ich zabrudzenia (patrz tabela programów) naciskając przycisk P. 6.
Programy Dane programów są mierzone w warunkach laboratoryjnych zgodnie z europejską normą EN 50242. W zależności od poszczególnych warunków użytkowania, czas trwania oraz dane programów mogą się zmieniać. PL Liczba i rodzaj programów i opcji zmieniają się w zależności od modelu zmywarki. Wskazówki ułatwiające wybór programu Mycie ekologiczne przy niskim zużyciu energii, odpowiednie dl a naczyń i garnków. Program 1. Eco* 50°C Normalnie zabrudzone naczyni a i garnki. Program standardow y codzienny. 2.
Opcje Uwagi: najlepszą skuteczność działania programów “Daily i Szybki” uzyskuje się przestrzegając zaleceń dotyczących ilości wkładanych naczyń. PL Aby zmniejszyć zużycie wody i energii, staraj się uruchamiać zmywarkę, gdy jest całkowicie wypełniona. Uwaga dla laboratoriów testowych: szczegółowe informacje dotyczące warunków testów porównawczych EN można uzyskać pod adresem: assistenza_en_lvs@indesitcompany.
Środek nabłyszczający i sól regeneracyjna Stosować wyłącznie produkty przeznaczone do zmywarek. Nie używać soli spożywczej lub przemysłowej ani środków do mycia ręcznego. Należy przestrzegać wskazówek znajdujących się na opakowaniu. W przypadku stosowania produktu wielofunkcyjnego nie jest konieczne dodawanie środka nabłyszczającego, zaleca się natomiast dodać sól, zwłaszcza gdy woda jest twarda lub bardzo twarda. Należy przestrzegać wskazówek znajdujących się na opakowaniu.
Konserwacja i utrzymanie Wyłączanie wody i prądu elektrycznego PL • Zakręcać zawór wody po każdym zmywaniu, aby uniknąć niebezpieczeństwa wycieków. • Wyjmować wtyczkę z kontaktu przed przystąpieniem do czyszczenia urządzenia oraz podczas czynności konserwacyjnych. Czyszczenie zmywarki • Obudowa zewnętrzna i panel sterowania mogą być czyszczone miękką ściereczką zwilżoną wodą. Nie należy stosować rozpuszczalników ani środków ściernych.
Anomalie i środki zaradcze Jeśli w pracy urządzenia pojawiają się anomalie w pracy, należy skontrolować następujące punkty przed zwróceniem się do Obsługi technicznej (patrz Obsługa techniczna). Niektóre z usterek są sygnalizowane za pomocą lampek zapalających się na panelu sterowania. Przed wezwaniem pomocy technicznej należy zanotować, które z lampek świecą.
195117846.