Instructions for use DISHWASHER GB English, 1 Contents Product Fiche, 2 Precautions and safety advice, 3-4 General safety Disposal of old electrical appliances Saving energy and respecting the environment Recycling & Disposal Information Installation, 5-6-7 Positioning and levelling Connecting the electricity and water supplies Technical data Switching the appliance on for the first time Advice regarding the first wash cycle Description of the appliance, 8 LTB 4M116 Overall view Control panel Loadi
Product Fiche GB Product Fiche Brand HOTPOINT Model LTB 4M116 Rated capacity in standard place settings (1) 14 Energy efficiency class on a scale from A+++ (low consumption) to D (high consumption) A+ Energy consumption per year in kWh (2) 293.0 Energy consumption of the standard cleaning cycle in kWh 1.03 Power consumption of the off-mode in W 0.5 Power consumption of the left-on mode in W 5.0 Water consumption per year in litres (3) 3080.
Precautions and safety advice The appliance was designed and manufactured in compliance with current international safety standards. The following information has been provided for safety reasons and should therefore be read carefully. Keep this instruction manual in a safe place for future reference. If the appliance is sold, given away or moved, please ensure the manual is kept with the machine, so that the new owner may benefit from the advice contained within it.
GB • Enzymes provide a particularly effective action at temperatures around 50°C, and as a result detergents containing enzymes can be used in conjunction with low-temperature wash cycles in order to achieve the same results as a normal 65°C wash cycle. • To avoid wasting detergent, use the product in appropriate quantities based on the manufacturer’s recommendations, the hardness of the water and the soil level and quantity of the crockery.
Installation If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may be tilted onto its back. Positioning and levelling 1. Remove the appliance from all packaging and check that it has not been damaged during transportation. If it has been damaged, contact the retailer and do not proceed any further with the installation process. 2.
GB The Company shall not be held responsible for any incidents that occur if these regulations are not observed. If the inlet hose is not long enough, contact a specialist store or an authorised technician (see Assistance). Anti-condensation strip* The water pressure must be within the values indicated in the Technical data table (see Installation).
Ensure the drain hose is securely attached, to prevent it coming away while the machine is in use and causing a flood. Fit hose to waste securely using a “Jubilee” type clip. Anti-flooding protection* To ensure floods do not occur, the dishwasher: - is provided with a special system which blocks the water supply in the event of anomalies or leaks from inside the appliance.
Description of the appliance GB Overall view 1. Upper rack 2. Upper sprayer arm 3. Tip-up dispensers 4. Rack height adjuster 5. Lower rack 6. Lower sprayer arm 7. Washing filter 8. Salt dispenser 9. Detergent and rinse-aid dispensers and device Active Oxigen* 10. Data plate 11. Control panel*** Control panel Select wash cycle button ON-OFF/Reset button and indicator light Wash cycle indicator light *** Only in completely built-in models * Only available in selected models.
Loading the racks Tips Before loading the racks, remove all food residues from the crockery and empty liquids from glasses and containers. No preventive rinsing is needed under running water. Arrange the crockery so that it is held in place firmly and does not tip over and arrange the containers with the openings facing downwards and the concave/convex parts placed obliquely, thus allowing the water to reach every surface and flow freely.
GB Tip-up compartments with adjustable position The side tip-up compartments can be positioned at three different heights to optimize the arrangement of crockery inside the rack. The upper rack can be adjusted for height based on requirements: high position to place bulky crockery in the lower rack and low position to make the most of the tip-up dispensers/ sectors by creating more space upwards.
Start-up and use Starting the dishwasher 1. Turn the water tap on. 2. Open the door and press the ON/OFF button. 3. Measure out the detergent. (see adjacent information). 4. Load the racks (see Loading the racks). 5. Select the wash cycle in accordance with the type of crockery and its soil level (see Table of wash cycles) by pressing the P button. 6. Select the wash options*. (see Special wash cycles and Options). 7. Start the wash cycle by shutting the door. 8.
Wash cycles GB Wash-cycle data is measured under laboratory conditions according to European Standard EN 50242. Based on the different conditions of use, the wash-cycle duration and data can change. The number and type of wash cycles and options may vary depending on the dishwasher model.
Rinse aid and refined salt Only use products which have been specifically designed for dishwashers. Do not use table salt or industrial salt, or washing up liquid. Follow the instructions given on the packaging. Switch the dishwasher on and off using the ON/OFF button. Press and hold the P button for a few seconds until you hear a beep sound.
Care and maintenance GB Shutting off the water and electricity supplies • Turn off the water tap after every wash cycle to avoid leaks. • Always unplug the appliance when cleaning it and when performing maintenance work. Cleaning the dishwasher • The external surfaces of the machine and the control panel can be cleaned using a non-abrasive cloth which has been dampened with water. Do not use abrasive detergents or . solvents.
Troubleshooting Whenever the appliance fails to work properly, check for a solution from the following list before calling for Assistance GB Problem: Possible causes / Solutions: The dishwasher does not start or cannot be controlled. • Switch off the appliance by pressing the ON/OFF button, switch it back on after approximately one minute and reset the program. • The appliance has not been plugged in properly. • The dishwasher door has not been shut properly. The door won’t close.
After Sales Service GB After Sales Service Appliance Registration No one is better placed to care for your Hotpoint appliance during the course of its working life than us - the manufacturer. We want to give you additional benefits of Hotpoint ownership. To activate your free 5 year parts guarantee you must register your appliance with us.
Guarantee Guarantee GB 12 months Parts and Labour Guarantee Your appliance has the benefit of our manufacturer’s guarantee, which covers the cost of breakdown repairs for twelve months from the date of purchase. This gives you the reassurance that if, within that time, your appliance is proven to be defective because of either workmanship or materials, we will, at our discretion, either repair or replace the appliance at no cost to you.
GB 18
GB 19
195112670.