UseAndCare A Note To You 2 Understanding Safety 3 Getting To Know Your Washer/Dryer 6 Operating Your Washer 7 Operating Your Dryer 12 Caring For Your Washer/Dryer 16 Laundry Tips 20 If You Need Assistance Or Service 33 Warranty 36 1-800-253-1301 Call us with questions or comments.
A Note To You Thank you for buying a Whirlpool ® appliance. You have purchased a quality, world-classhome appliance. Years of engineering experience have gone into its manufacturing. To ensure many years of trouble-free operation,we have developed this Use and Care Guide. It is full of valuable informationon how to operate and maintain your appliance properly and safely. Please read it carefully. Also, please complete and mail the Ownership RegistrationCard providedwith your appliance.
Understanding Safety For your safety, the information in this manual must be followed to minimize the risk of fire or explosion or to prevent property damage, personal injury or loss of life. -Do not store or use gasoline or other flammable in the vicinity of this or any other appliance. -WHAT TO DO IF YOU SMELL vapors and liquids GAS: • Do not try to light any appliance. • Do not touch any electrical building.
IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electrical shock or injury to persons when using your washer/dryer, follow basic precautions, including the following: • Read all instructionsbefore using your THIN "I'WIN®washer/dryer. • Do not machine wash or machine dry items cleaned, washed, soaked in, or spottedwith wax, paint, gasoline, oil, dry cleaning solvents, or other flammable fluids. The fumes can create a fire hazard or explosion.
Understanding your responsibilities • Unplug the power supply cord or turn off electrical power before attempting to service your washer/dryer. Shut off gas valve if you have a gas washer/dryer. • Do not wash or dry items that are soiled with vegetable or cookingoil. These items may contain some oil after laundering. Due to the remaining oil, the fabric may smoke or catch fire by itself. • Store flammable solvents or fluids away from your washer/dryer.
Getting To Know Your Washer/Dryer The parts and features of your THIN TWIN®washer/dryer are illustratedin this section. Become familiar with all parts and features before using your washer/dryer. Model and serial number label Dryer drum Lint screen Optional exhaust outlet Dryer controls Washer conbols Lid instructions / Agitatol Basket Tub Other features not shown: End of cycle Automatic Your dryer sounds a signal to let you know when the selected cycle is finished.
Operating Your Washer In This Section Page Page Before starting your washer .............................. 7 SelecUng a cycle and Urne .............................. Starling or stopping your washer ..................... 7 Using rinse and spin ...................................... 10 SelecUng a load size .......................................... 7 Using drain and spin ..................................... 10 What happens in each cycle .........................
Load size tips • Items should move freely in the washer. Do not overload the machine or select a load size that is too small for the wash load. • Use a large load size setting for best results with permanent press clothes. • Reduce wash time when using a small load size setting. Loads with only a few small items need less wash time. Selecting wash-rinse temperatures Match the water temperature to the type of fabric and soils being washed.
Regular cycle The Regular cycle features the Gentle Wash system and high spin speeds to shorten drying time. • Use HEAVY, 12 minutesof wash time, to clean sturdily-constructedcottonand linen fabrics that are heavily soiled. • Use NORMAL, 8 minutes of wash time, to clean cottonand linen fabrics that are lightly to moderately soiled. Permanent Press cycle The Permanent Press cycle features the Gentle Wash system, a cool-down rinse, and low spin speeds to reduce wrinkling.
Pre-Wash Pre-Wash features a brief period of high speed agitationto help remove heavy soils and stains that need pretreatment. • Use warm water for prewashing stained laundry. (Hot water can set stains.) See pages 22-24 for stain removal information. • After Pre-Wash ends, add detergent and set a new wash cycle. Super Wash cycle Pr_,wuh Super Wash automaticallyprewashes the laundry and advances into the Regular wash cycle. (The washer does not need to be reset after the Super Wash cycle.
What happens in each cycle When the Cycle Control Knob is set to a number and pulled out, the washer fills (to the selected load size) before agitationand timing start. The washer will begin agitating immediately after filling; agitation can occur with the washer lid up or down. After agitationstarts, the Cycle Control Knob turns clockwiseuntil it points to OFF and the cycle ends. The washer pauses briefly throughout each cycle. These pauses are normal for washer operation.
Operating In This Your Dryer Section Page Page Before starting your dryer ................................ 12 Resta_ng Star'dng your dryer ............................................ 12 Understanding 12 SelecUng the right cycle and setting ............... 15 Stopping your dryer .......................................... your dryer ........................................ your cycles ..............................
Understanding your cycles See the chart below for descriptionsof the cycles that are on your dryer. See page 15 for help in selecting the right cycle. NOTES: • Use the Energy Preferred Automatic Setting (,) to dry most loads. (See page 14.) • Shaded areas in the illustrationsshow cycle locations. • To help reduce wrinkling, remove the load from the dryer as soon as tumbling stops. This is importantfor permanent press, knits, and syntheticfabrics.
CYCLES Automatic CYCLE CONTROL KNOB cycle(s) Use an automaUc cycle to dry most loads. • Your automaticcycle shuts oft when the selected dryness is reached. • The Cycle Control Knob will not move until the load is almost dry. After the cool-down, the Cycle Control Knob automatically moves to an OFF area and tumbling stops. Dry most loads using the Energy Preferred Automatic Setting (*), • If the load is drier than you like, select a setting closer to LESS DRY the next time you dry a similar load.
Selecting the right cycle and setting Use the chart below to guide you when making drying selections. • Do not overdry. Overdrying can cause shrinkage, staticcling, and damage to some fabrics. Fire Hazard Do not dry heat-sensitive fabrics, plastic, rubber, or some stuffed items with heat. Use the Air cycle, or line dry. Failure to do so could result in fire or damaged items.
Caring For Your Washer/Dryer In This Section Page Page load ................................... 16 13ps for caring for your washer/dryer needed ................................... 16 Care during periods of non-use ................... 19 Maintenance-every Maintenance-as .......... 19 Washers and dryers require regular maintenance. Followthe suggestions below to maintain your washer/dryer properly.
Cleaning the washer/dryer interior Washer: • If the washer interior needs cleaning, put 1/2cup (125 mL) of chlorine bleach and 1 cup (250 mL) of detergent in the washer. Run through a complete cycle using hot water. Dryer: Electrical Shock, Personal Injury and Fire and Explosion Hazard • Turn off the electrical power before cleaning the interior. • Make sure the dryer is cool. • Use nonflammable cleaner. Failure to do so could result in electrical shock or injury, fire or explosion.
Removing from the accumulated lint dryer Lint can gather inside the dryer and be fuel for a fire. It is recommended that lintbe removed every 2 to 3 years, or more often, depending on dryer usage. Cleaning shouldbe done by a qualified person. If you have any questions, please call our Consumer Assistance Center at 1-800-253-1301. Electrical Shock, Personal Injury and Product Damage Hazard • Unplug the power supply cord or turn off the electrical power before removing dryer panels.
Tips for caring for your washer/dryer • Wipe up detergent, bleach and other spills with a soft, damp cloth or sponge as they occur. • Remove hard water deposits using only cleaners labeled as washer safe. • After tinting or dyeing, put chlorine bleach and detergent in the washer. Run through a complete cycle using hot water to remove excess dye or tint. If staining occurs on following loads, repeat the process. • Sharp or metal objects can damage your washer/dryer.
Laundry Tips In This Section Page Before you wash or dry .................................... Page 20 Saving energy ................................................ 27 steins ............................................... 22 Drying special-care items ............................. 28 Water usage guide ............................................ 25 Solving laundering problems 30 Washing special-care 26 Using laundry aids ......................................... Removing item0 ...........
• Mix large and small items in each load. Load balance. An off-balance load can make the machine vibrate evenly to maintain washer duringspin. Load the dryer by the amount of space items take up, not by their weight. • For better tumbling actionwhen drying only a few small items, add one or two lint-free towels. This also prevents small, lightweight items from blockingairflow. • You may need to rearrange large items (sheets, blankets, tablecloths) during a drying cycle to reduce bailing or rollingup.
Removing stains Stained, heavily soiled or greasy items may need to be prewashed or soaked for best results. Soaking helps remove protein-type stains like blood, milk, or grass. Prewashing helps loosen soil before washing. • Start with cold or warm water. Hot water can set some stains. Prewashing • Test stain removers on an inside seam or hidden corner of the item to see if the color is removed. or soaking Use warm water for soaking or prewashing stained laundry. Hot water can set stains.
Stain removal guide STAIN TO REMOVE Alcoholic beverage These stains turn brown with age, so treat immediately. Sponge or soak fresh stains with cold water. Wash. If stain remains, soak 15 minutes in a solution of lukewarm water, liquid detergent and a few drops of white vinegar. Rinse. Wash. Blood Rinse immediately or soak in cold water with enzyme presoak for 30 minutes or longer. Rinse. Rub detergent into any remaining stains. Rinse.
STAIN TOREMOVE Ironor rust Coloredor noncolorfastItems:Applylemonjuiceandsalt.Placeinthesun todry.Rinsethoroughly. Repeatifnecessary. WhIteor colorfastItems:Trya rustremover. Testfirstoninsideseamor hem.Somerustremovers arenotwashersafe.Followpackage directions. Ketchup or Sponge immediately witha nonflammable fabriccleanerorapplya prewash tomato soilandstainremover. Rinse.Wash.If stainremains, applya liquiddetergent products tostainorsoakinwarmwaterwithanenzyme presoak. Rewash.
Water Water tern usage guide )erature WASH RINSE USE FOR COMMENTS HOT COLD • Heavy soils • Work clothes • Gives best cleaning for heavy soils. • Removes oils, perspiration,greasy soils and stains. 130 ° F (54°C) or above WARM 90°-110°F (32o-44oc) • Sturdywhites and colorfastpastels • Diapers COLD/ WARM* • Prevents graying and yellowing. • Light and moderate soils • Dark or noncolorfast colors • Safe for most fabric finishes. • Less fading and dye bleeding. • Reduces wrinkling.
Washing special-care items Most garments and household textiles have care labels with laundering instructions. Always follow label directionswhen they are available. General washing instructionsfor some special washables are included in this section. Blankets, electric and woolen Pretreat spots and stains. Select water temperature, cycle, and time according to the type of blanket being washed. Two rinses may be necessary. If manufacturer recommends machine washing: 1. Measure blanket before washing. 2.
Fiberglass materiels Do not wash fiberglass materials in your washer. Glass particles could stick to the next load and cause skin irritation. Knits Knits are comfortable to wear because they stretch. However, this means that knits are more likely to be stretched and damaged when washed (especially bulky knits). Knits made of synthetic fabrics such as polyester, nylon, and acrylic tend to keep their original shape more than a knit made of cotton or ramie. 1.
Drying special-care items Most garments and householdtextiles have care labels with laundering instructions.Always follow label directionswhen they are available. General dryinginstructions for some special washables are included in this section. Air drying (heat sensitive items) Heat sensitivefabrics, plastic, rubber or some stuffed items require dryingwithout heat. Use an Air setting or line dry. The Air setting is useful for fluffingbedding and pillows, and dusting draperies and clothing.
Curtains, slipcovers Remove drapery weights and hooks before laundering. • Draperies, slipcovers 1. Use lowest temperature or an Air setting. 2. Leave room in dryer for load to fluff. 3. Remove from dryerwhile slightlydamp. Do not overdry. For slipcovers, replace slipcoverswhile stillslightlydamp. They will dry to fit tightly. • Sheers, some synthetic curtains • Bonded or laminated fabrics Dryonlya few minutes.
Tinted, dyed or noncolorfast itoms Dry according to fabric, weight and care label instructions.Wipe the dryer drum carefully to remove any dye or lintthat can be transferred to other loads. See "Cleaningthe washer/dryer interior"on page 17. Towels Select cycle according to fabric type. Some towels, particularlythose made of a blend of syntheticfibers and natural fibers (polyester and cotton blends), may shed more lintthan other towels causing your dryer's lint screen to get full faster.
PROBLEM Shrinking CAUSE Slow drying • • • • • • Large amount of moisture in the load Cold rinse water Room temperature below 45°F (7°C) Dryer improperlyexhausted Clogged lint screen Improper electrical supply Snags, rips, holes • • • • • Items damaged before washing Misuse of chlorine bleach Sharp articles not removed from pockets Overloading Fasteners not fastened Static electrlclty • Load overdried • Fabric softener not used • Synthetics, syntheticblends, permanent press, and knits in load Stiff
Using laundry aids Follow package instructionswhen using laundry aids. (See =Removing Stains" on pages 22-24 for more information.) Chlorine bleach 1. Let the washer fill and begin agitatingthe load. 2. Measure bleach. Never use more than V2cup (125 mL) for a full load. Dilute measured bleach in 1 quart (1 L) of water. 3. Add bleach to the wash cycle so it can be removed in the rinse cycle. Pour bleach around agitator, not directlyon load. • Follow directions on care labels.
If You Need Assistance Or Service 1. Before calling for assistance Is your water turned on? _1 ... Is the power cord plugged in? -,qp,- I_ll@ exhaust hood clogged with lint? Is exhaust duct or outside lint? Is lint screen clogged with Have you blown a fuse or tripped the circuitbreaker? CHECK THE FOLLOWING PROBLEM Washer will not fill If you need more help, check the chart below.
PROBLEM Dryer will not run CHECK THE FOLLOWING Is the power cord firmly plugged into a live circuit with proper voltage? Has a household fuse blown or circuit breaker tripped? Has a time-delay fuse been used? Is the dryer door firmly closed? Did you firmly push the Start Button? Are the controls set in an ON position? Dryer will not heat Is the cycle in the last few minutes? (There is no heat during that time.
2. If you need assistance* ... Call Whirlpool Consumer Assistance Center telephone number. Dial toll-free from anywhere In the U.S.A.: 1-800-253-1301 and talk with one of our trained consultants. The consultantcan instructyou in how to obtain satisfactoryoperation from your appliance or, if service is necessary, recommend a qualified service company in your area. If you prefer, write to: Mr.
WHIRLPOOU THIN TWIN *Washer/Dryer Warranty LENGTH OF WARRANTY WHIRLPOOL WILL PAY FOR FULL ONE-YEAR WARRANTY From Date of Purchase FSI:_ replacement parts and repair labor to correct defects in materials or workmanship. Service must be provided by an authorized Whirlpool service company. LIMITED FIVE-YEAR WARRANTY From Date of Purchase FSP replacement parts for any part of gearcase assembly if defective in materials or workmanship.
