LTF 11M113 7L IT Italiano Istruzioni per l’uso LAVASTOVIGLIE - Sommario Istruzioni per l’uso, 1 Precauzioni e Consigli, 2-3 Assistenza, 4 Scheda prodotto, 5 Installazione, 6-7 Descrizione dell’apparecchio, 8 Sale Rigenerante e Brillantante, 9 Caricare i cesti, 10-11 Detersivo e uso della lavastoviglie, 12 Programmi, 13 Programmi Speciali ed Opzioni, 14-15 Manutenzione e cura, 16 Anomalie e rimedi, 17 EN English Operating instructions DISHWASHER - Contents Operating instructions, 1 Precautions and ad
IT Precauzioni e consigli L’apparecchio è stato progettato e costruito in conformità alle norme internazionali di sicurezza. Queste avvertenze sono fornite per ragioni di sicurezza e devono essere lette attentamente. È importante conservare questo libretto per poterlo consultare in ogni momento. In caso di vendita, di cessione o di trasloco, assicurarsi che resti insieme all’apparecchio. Leggere attentamente le istruzioni: ci sono importanti informazioni sull’installazione, sull’uso e sulla sicurezza.
stoviglie e al grado di sporco consultando la Tabella dei programmi: - per stoviglie normalmente sporche utilizzare il programma Eco, che garantisce bassi consumi energetici e di acqua. - se il carico è ridotto attivare l’opzione Mezzo carico (dove disponibile vedi Programmi Speciali ed Opzioni). • Se il proprio contratto di erogazione dell’energia elettrica prevede fasce orarie di risparmio energetico, effettuare i lavaggi negli orari a tariffa ridotta.
health. The crossed-out dustbin symbol shown on all products reminds the owners of their obligations regarding separated waste collection. For further information relating to the correct disposal of household appliances, owners may contact the relevant public authority or the local appliance dealer. Saving energy and respecting the environment Saving water and energy • Only begin a wash cycle when the dishwasher is full.
IT Scheda prodotto Scheda prodotto Marchio HOTPOINT ARISTON Modello LTF 11M113 7L Capacità nominale in numero di coperti standard (1) 14 Classe di efficienza energetica su una scala da A+++ (bassi consumi) a D (alti consumi) A+ Consumo energetico annuo in kWh (2) 293.0 Consumo energetico del ciclo di lavaggio standard in kWh 1.03 Consumo di potenza nel modo spento in W 0.5 Consumo di potenza nel modo lasciato acceso in W 5.0 Consumo di acqua annuo in litri (3) 1960.
Installazione IT In caso di trasloco tenere l’apparecchio in posizione verticale; se fosse necessario, inclinarlo sul lato posteriore. Collegamenti idraulici L’adattamento degli impianti idraulici per l’installazione deve essere eseguito solo da personale qualificato. I tubi di carico e di scarico dell’acqua possono essere orientati verso destra o sinistra per consentire la migliore installazione. I tubi non devono essere piegati o schiacciati dalla lavastoviglie.
Avvertenze per il primo lavaggio Dopo l’installazione, rimuovere i tamponi posizionati sui cesti e gli elastici di trattenimento sul cesto superiore (dove presenti). Impostazioni addolcitore acqua Prima di avviare il primo lavaggio, impostare il livello di durezza dell’acqua di rete. (vedi capitolo Brillantante e sale rigenerante) Il primo caricamento del serbatoio dell’addolcitore deve avvenire con acqua, poi introdurre circa 1 Kg. di sale; è normale che l’acqua fuoriesca.
Descrizione dell’apparecchio IT Vista d’insieme 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
Sale rigenerante e Brillantante Usare solo prodotti specifici per lavastoviglie. Non usare sale alimentare o industriale. Seguire le indicazioni riportate sulla confezione. Se si usa un prodotto multifunzione, si consiglia comunque di aggiungere il sale, specie se l’acqua è dura o molto dura. (Seguire le indicazioni riportate sulla confezione). Non aggiungendo né sale né brillantante è normale che le spie MANCANZA SALE* e MANCANZA BRILLANTANTE* rimangano accese.
Caricare i cesti IT Suggerimenti Prima di caricare i cesti, eliminare dalle stoviglie i residui di cibo e vuotare bicchieri e i contenitori dei liquidi rimasti. Non è necessario un risciacquo preventivo sotto acqua corrente. Sistemare le stoviglie in modo che siano ben ferme e non si ribaltino, i contenitori siano disposti con l’apertura rivolta in basso e le parti concave o convesse in posizione obliqua, per permettere all’acqua di raggiungere tutte le superfici e di defluire.
Ribaltine a posizione variabile* Le ribaltine laterali sono posizionabili su tre altezze differenti per ottimizzare la disposizione delle stoviglie nello spazio del cesto. I calici possono essere posizionati stabilmente sulle ribaltine inserendo lo stelo del bicchiere nelle apposite asole. Per ottimizzare l’asciugatura, posizionare le ribaltine con l’inclinazione maggiore. Per variare l’inclinazione, sollevare la ribaltina, farla scorrere leggermente e posizionarla come desiderata.
Detersivo e uso della lavastoviglie IT Avviare la lavastoviglie 1. Aprire il rubinetto dell’acqua. 2. Aprire la porta e premere il tasto ON-OFF: le spie ON/OFF, opzioni e il display si illuminano. 3. Dosare il detersivo. (vedi a lato). 4. Caricare i cesti (vedi Caricare i cesti). 5. Selezionare il programma in base alle stoviglie e al loro grado di sporco (vedi tabella dei programmi) premendo il tasto P. 6. Selezionare le opzioni di lavaggio*. 7. Avviare chiudendo la porta. 8.
Programmi I dati dei programmi sono misurati in condizioni di laboratorio secondo Norma europea EN 50242. A seconda delle diverse condizioni di utilizzo, la durata e i dati dei programmi possono variare. IT Il numero e il tipo di programmi ed opzioni variano in base al modello di lavastoviglie.
Programmi speciali ed Opzioni IT Note: le migliori prestazioni dei programmi “Fast e Express 30’”, si ottengono preferibilmente rispettando il numero di coperti specificati. Per consumare di meno usa la lavastoviglie a pieno carico. Nota per i laboratori di Prove: per informazioni sulle condizioni della prova comparativa EN, farne richiesta all’indirizzo: ASSISTENZA_EN_LVS@indesitcompany.
START 2END LIGHT * IT Alcuni modelli di lavastoviglie, sono dotati di un indicatore luminoso verde posizionato nell’interstizio tra la porta ed il top della cucina, che informa sullo stato di avanzamento del programma in corso.
Manutenzione e cura IT Escludere acqua e corrente elettrica • Chiudere il rubinetto dell’acqua dopo ogni lavaggio per eliminare il pericolo di perdite. • Staccare la spina dalla presa di corrente quando si pulisce la macchina e durante i lavori di manutenzione. Pulire la lavastoviglie • La superficie esterna e il pannello di controllo possono essere puliti con un panno inumidito con acqua non abrasivo. Non usare solventi o abrasivi.
Anomalie e rimedi Qualora l’apparecchio presenti delle anomalie di funzionamento, controllare i seguenti punti prima di rivolgersi all’Assistenza. Anomalie: Possibili cause / Soluzione: La lavastoviglie non parte o non risponde ai comandi • Spegnere la macchina con il tasto ON/OFF, riaccendere dopo un minuto circa e reimpostare il programma. • La spina non è ben inserita nella presa di corrente. • La porta della lavastoviglie non è ben chiusa.
IT 18
Installation If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may be tilted onto its back. EN WARNING: HAZARDOUS VOLTAGE! Connecting the water supply Under no circumstances should the water inlet hose be cut as it contains live electrical parts. Adaptation of the water supply for installation should only be performed by a qualified technician.
EN Advice regarding the first wash cycle After the installation, remove the stoppers from the racks and the retaining elastic elements from the upper rack (if any). Water softener settings Before starting the first wash cycle, set the hardness level of the water from the mains supply. (see chapter Rinse aid and refined salt). First load the softener tank with water, then introduce about 1 kg of salt. It is perfectly normal for water to flow out. As soon as this procedure is complete, run a wash cycle.
Description of the appliance Overall view EN 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
Refined salt and rinse aid, EN Only use products which have been specifically designed for dishwashers. Do not use table salt or industrial salt. Follow the instructions given on the packaging. If you are using a multi-function product, we recommend that you add salt in any case, especially if the water is hard or very hard. (Follow the instructions given on the packaging.) If you do not add salt or rinse aid, the LOW SALT* and LOW RINSE AID* indicator lights will remain lit.
Loading the racks Tips Before loading the racks, remove all food residues from the crockery and empty liquids from glasses and containers. No preventive rinsing is needed under running water. Arrange the crockery so that it is held in place firmly and does not tip over; and arrange the containers with the openings facing downwards and the concave/convex parts placed obliquely, thus allowing the water to reach every surface and flow freely.
EN Tip-up compartments with adjustable position The side tip-up compartments can be positioned at three different heights to optimize the arrangement of crockery inside the rack. Wine glasses can be placed safely in the tip-up compartments by inserting the stem of each glass into the corresponding slots. For optimum drying results incline the tip-up compartments more.
Detergent and dishwasher use Starting the dishwasher 1. Turn the water tap on. 2. Open the door and press ON-OFF button: the ON/OFF indicator lights, options and the display come on. 3. Measure out the detergent. (see adjacent information). 4. Load the racks (see Loading the racks). 5. Select the wash cycle in accordance with the type of crockery and its soil level (see table of wash cycles) by pressing the P button. 6. Select the wash options*. (see Special wash cycles and options). 7.
Wash cycles EN Wash-cycle data is measured under laboratory conditions according to European Standard EN 50242. Based on the different conditions of use, the wash-cycle duration and data can change. The number and type of wash cycles and options may vary depending on the dishwasher model. Wash cycle which include drying Options Approximate duration of wash cycles Water consumption (l/cycle) Energy consumption (KWh/cycle) 1. Eco Yes Delayed start – Tabs – Extra Dry 03:10’ 7 1,03 2.
Special wash cycles and Options Notes: Optimum performance levels when using the “Fast" and "Express 30’” cycles can be achieved by respecting the specified number of place settings. To reduce consumption even further, only run the dishwasher when it is full. Note for Test Laboratories: for information on comparative EN testing conditions, please send an email to the following address: ASSISTENZA_EN_LVS@indesitcompany.
EN START 2END LIGHT * Some dishwasher models are equipped with a green indicator light in the gap between the door and kitchen top providing information on the phase of the current wash cycle. One of the following operating modes can be selected: a) Disabled function b) When the cycle starts the light goes on for few seconds, stays off during the cycle and flashes at the end of the cycle (default mode) c) The light stays on during the cycle and flashes at the end of the cycle.
Care and maintenance Shutting off the water and electricity supplies • Turn off the water tap after every wash cycle to avoid leaks. • Always unplug the appliance when cleaning it and when performing maintenance work. Cleaning the dishwasher • The external surfaces of the machine and the control panel can be cleaned using a non-abrasive cloth which has been dampened with water. Do not use solvents or abrasive products.
Troubleshooting EN Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance. Problem: Possible causes / Solutions: The dishwasher does not start or cannot be controlled. • Switch off the appliance by pressing the ON/OFF button, switch it back on after approximately one minute and reset the program. • The appliance has not been plugged in properly. • The dishwasher door has not been shut properly. The door won’t close. • The lock was released.
EN 31
195124065.00 - NC 05/2014 jk - Xerox Fabriano EN Indesit Company Spa Viale Aristide Merloni 47 60044 Fabriano (AN) Italy www.hotpoint-ariston.