Specification

Minimum spaces for installation (these spaces should be followed)

LOCATION REQUIREMENTS

GAS SUPPLY REQUIREMENTS

MODEL Conversion Kit to Natural Gas

This stove is prepared to work with a moving LP gas tank or a fixed LP gas tank.

To use your stove with natural gas you should contact Whirlpool Service to change the nozzle

and make the necessary adjustments.

The qualified technician should make the conversion on the nozzles of each cooktop burner; the

technician must test the connection and the gas pressure in the oven, the values should be like the

following:

NOTE: The gas type used for this range is LP. If you wish to use Natural gas with this range you

will need a conversion kit according to the following table. This kit can be ordered from the

Authorized Whirlpool Solution Center. If you don’t follow theses indications your stove will generate

soot and will require cleaning service which is not covered by the warranty of this product.

OPERATING LP GAS PRESSURE

2,75 kPa; 28cm WATER COLUMN

OPERATING NATURAL GAS PRESSURE

1,76 kPa; 18cm WATER COLUMN

LWFR3000B LWFR3100B

LWFR3200D LWFR3400D

LWFR3400S LWFR3300D

W10513462

W10132112

W11209937

W11209938

W11209939

LWFR5000D LWFR5100S

LWFR7100S

LWFR7000S

LWFR7200S

76.2

76.55