Specification

1. Remove thegrates.
2. Remove the cap, the burner and wash with soapy water and a sponge.
Rinse deeply and dry.
3. Cleanthegaslineopeningwithawetcloth.
4. When the burners are dry, replace each one along with the burner cap. Make sure the
burners are aligned with the alignment tabs (as shown on the image on the right).
5. If the gas flow is obstructed by food spills, food residues or cleaning product residues, then
follow these recommendations:
i) Remove the grates and burners from the cooktop.
ii) Insert a twistie (wire to close bread bags), remove the plastic covering the twistie or if you
prefer use a safety pin or needle. DON’T USE A TOOTHPICK.
6. If the burner needs regulation, contact a qualified repair technician.
7. Replace the burner grates on the cooktop.
8. Turn on the burner. If the burner doesn’t turn on, don’t try to fix the burner by yourself.
Contact a qualified repair technician.
Griddle:
Cleaning method:
Do not use abrasive materials, plastic or metal fibers to clean, use soapy water and a sponge.
TROUBLESHOOTING
Before calling to Service, prove the solutions here suggested.
Problem Check out Solution
Nothing works -If wiring is properly connected and
polarized energy supply
-Has blown a fuse in the house or
tripped circuit breaker
-If there is gas in your home, check
if other gas appliances that use
work
-If the stove is properly connected
to the gas supply
Connect to a properly grounded
Replace fuse or reconnect the
circuit
Call your gas supplier
See the operating instructions or
contact an expert.
To keep the cooktop burners fully functional, it’s necessary to perform periodic cleaning or clean
every time a liquid spills over the burner. Follow these steps:
Standard burner and super burner (in some models.)
42