WHIRLPOOL BATH OWNER'S MANUAL Safety, Operation, Maintenance, & Warranty SAFETY GUIDELINES This manual contains information for you. This information relates to YOUR SAFETY and will also help in PREVENTING PROBLEMS. To help you recognize these items of importance, we will use the following symbols. PLEASE read the manual and pay special attention to these sections.
IMPORTANT SAFETY INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, PERSONAL INJURY OR DAMAGE TO WHIRLPOOL. WHEN USING THIS WHIRLPOOL, THESE BASIC PRECAUTIONS SHOULD BE FOLLOWED: READ AND FOLLOW ALL INSTRUCTIONS! The unit must be connected only to a supply circuit that is protected by a ground-fault circuit-interrupter (GFCI). Such a GFCI should be provided by the installer and should be tested on a routine basis. To test the GFCI, push the test button. The GFCI should interrupt power.
Table of Contents Important Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Pearl Whirlpool Bath System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Whirlpool Jets . . . . . . . . . . . . . . . . . . . . . . .
PEARL WHIRLPOOL BATH SYSTEM Series-S (Standard Feature) O (An Option) NA (Not Available) PUMP Essence - S Designer - S Classic - S Our commercial quality pump is the heart of your whirlpool system. The pump is positioned on a specially designed cantilevered mounting base. It helps isolate and dampen vibration and noise, adding to your comfort and pleasure. The pump can (at times) take a minute or two to prime and begin water circulation.
IN-LINE HEATER Essence - S Designer - O* Classic - O * Not available with PearlAir System and the Ducetta The In-Line Heater (fig. 5) is designed to maintain the starting water temperature. The heater is not a substitute for an adequately sized water heater. Proper water heater size should be determined by a plumber prior to the whirlpool installation. During bathing, it is normal to experience an impression that the water is cooling.
BATH WASTE Essence - S Designer - S Classic - O The high quality bath waste that is included with your Pearl is cable operated, not the common linkage type found in most tubs which are subject to clogging problems. The drain plug has an adjustable screw and locking nut to vary the overall length of the plug. If the bath waste drain does not seal, turn in the screw and retighten the locking nut (fig. 7).
WHIRLPOOL ON/OFF AIR SWITCH PUMP CONTROL Essence - NA Designer - NA Classic - S The air switch pump control (fig. 9a) allows on/off control operations from within the tub. fig. 9a SENSATOUCH™ ELECTRONIC WHIRLPOOL CONTROL Essence - NA Designer - S Classic - O The SensaTouch electronic control (fig. 9b) allows touch on/off operation from within the tub when water entirely covers the low water shut off button, (fig. 9c) located near the highest jet.
appears on the LCD, indicating that the controller is ready to operate. In the unlikely event that a system error exists, the associated error code is displayed on the LCD before “Pearl Baths” is displayed. When the bath is not in use, the LCD and control button lights go out; they light up again at the touch of a button. “Pearl Baths” remains displayed on the LCD until the controller detects water. When the bath is idle, the Dry Cycle may automatically activate.
1. Observe the LCD and press the Select button. “Light Off” appears on the LCD. 2. Use the On/Off button to turn the jetted bath lighting on. 3. Use the Up and Down buttons to increase or decrease the intensity of the lighting, respectively. The light intensity ranges between Lt6 (high) and Lt1 (low). By default, the light intensity is set to the highest intensity (Lt6). Press and hold the Up and Down buttons to cycle to the higher or lower intensity settings. 4.
HOW TO USE YOUR WHIRLPOOL BATH Before taking your first bath, read and apply the "Important Safety Instructions" on Page 1. To reduce the risk of injury, do not permit children to use the whirlpool unless they are closely supervised at all times. Those requiring supervision for any reason, should never be allowed to use the whirlpool unattended.
whirlpool system. (The oil can also create an environment conducive to bacterial growth.) However, if you choose to use oil based additives, you must clean the system as outlined on the following page immediately after use. Bath Shops have a variety of products usable in your whirlpool bath, that do not contain oil. They have many fragrances that can enhance your whirlpool pleasure.
USER MAINTENANCE INSTRUCTIONS CLEANING THE TUB SURFACE Proper care and maintenance will preserve the high gloss acrylic finish. 1. To properly clean the surface, wipe with a soft damp cloth, or sponge, using household soap or liquid detergent. The acrylic manufacturer recommends New Liquid Spic and Span for cleaning. 2. DO NOT use any cleaning products containing abrasives or solvents since these could dull the brilliant surface. HARSH CHEMICALS SHOULD NOT BE USED ON THE SURFACE. 3.
TROUBLE SHOOTING GUIDE SYMPTOM CAUSE REMEDY The whirlpool has a Smart-Touch control and LOW WATER flashes on the digital display. • The water level is too low. • Add water until the Pearl logo on the control illuminates. The pump surges. • The suction screen may be clogged. • The impeller may be clogged. • Jet nozzle is pointing at return. • Inspect suction screen for hair or other debris. • Adjust jet nozzle direction. The pump comes on but does not move any water. • Priming.
SALES TERMS AND CONDITIONS Price Orders are accepted subject to prices in effect at the time of shipment and prices are subject to change without notice. The published pricing schedule shows suggested list prices and is subject to a trade discount as determined by MAAX Inc. (hereafter “MAAX”). Orders will be invoiced at the price in effect at the time the orders are placed. Selling prices may be readjusted without notice during the year, for instance if transportation costs increase due to fuel surcharges.
chase by the owner/end-user, contractor or builder from an authorized dealer. MAAX warrants Steamax systems to be free from defects in workmanship and materials under normal use and service for a period of five (5) years, and steam nozzles for two (2) years, from the initial date of purchase by the owner/end-user, contractor or builder from an authorized dealer.
NOTICE INSTALLER: Underwriters Laboratories and some state agencies require that this Owner’s Manual be left with the home owner or with the tub after installation. Important safety instructions, warranty information and the product registration card are contained within. TAPE THIS PACKET TO THE TUB OR LEAVE IN AN OBVIOUS PLACE Pearl Baths, Inc. 9224 73rd Avenue North Minneapolis, MN 55428 Phone: (763) 424-3335 Toll Free: (800) 328-2531 Fax: (763) 424-9808 www.pearlbaths.com www.maax.