INSTALLATION AVANT DE BRANCHER L’APPAREIL Vérifiez que la tension indiquée sur la plaque signalétique correspond bien à celle de votre habitation. APRÈS LE BRANCHEMENT DE L’APPAREIL Le four ne peut être utilisé que si la porte est correctement fermée. Ne démontez pas les plaques de protection contre les micro-ondes situées sur les flancs de la cavité du four. Elles empêchent à la graisse et aux particules alimentaires de pénétrer dans les canaux d’entrée des micro-ondes.
REMARQUES IMPORTANTES CONCERNANT LA SÉCURITÉ LISEZ ATTENTIVEMENT ET CONSERVEZ EN LIEU SÛR POUR TOUTE CONSULTATION ULTÉRIEURE Veillez à ne pas chauffer, ranger ou utiliser de produits inflammables à l’intérieur ou à proximité du four. Les vapeurs dégagées peuvent provoquer un incendie ou une explosion. N’utilisez pas de produits chimiques ou de vapeurs corrosifs dans cet appareil. Ce type de four a été spécialement conçu pour réchauffer ou cuire des aliments.
PRÉCAUTIONS GÉNÉRALITÉS N’utilisez cet appareil que pour un usage domestique! Le four ne doit jamais être utilisé à vide avec la fonction micro-ondes. Cela risquerait de l’endommager. Si vous vous exercez à le programmer, placez un verre d’eau à l’intérieur. L’eau absorbera l’énergie des micro-ondes et le four ne sera pas abîmé. N’utilisez pas la cavité du four pour y ranger des objets. Ne démontez pas les plaques de protection contre les micro-ondes situées sur les flancs de la cavité du four.
ACCESSOIRES GÉNÉRALITÉS De nombreux accessoires et ustensiles pour four micro-ondes sont disponibles sur le marché. Avant de les acheter, assurez-vous qu’ils conviennent bien à cet usage. Vérifiez que les ustensiles utilisés sont résistants à la chaleur et perméables aux microondes avant de les utiliser. Lorsque vous placez des aliments et des accessoires dans le four micro-ondes, assurezvous que ceux-ci ne sont pas en contact direct avec l’intérieur du four.
PROTECTION CONTRE UNE MISE EN MARCHE DU FOUR À VIDE / SÉCURITÉ ENFANTS Cette fonction de sécurité automatique est activée une minute après le retour du four en «mode veille». Cela signifie que vous devez ouvrir et refermer la porte, pour y introduire un plat, afin d’annuler la sécurité enfants. Sinon l’afficheur indique «door». INTERRUPTION OU ARRÊT DE LA CUISSON Pour interrompre la cuisson: Si vous souhaitez vérifier, mélanger ou retourner les aliments, ouvrez la porte: la cuisson s’arrêtera automatiquement.
HORLOGE Maintenez la porte ouverte pendant le réglage de l’horloge. Vous disposez ainsi de 10 minutes pour effectuer cette opération. Sinon, chaque opération doit être effectuée en moins de 60 secondes. 1(a) 2 4 6 3 5 1(a). Amenez le bouton multifonctions sur la position zéro. 2(b). Appuyez sur la touche Enter (Retour) pendant 3 secondes, jusqu’à ce que le chiffre de gauche (heures) clignote. 3. Tournez le bouton +/- pour régler les heures. 4.
CUISSON ET RÉCHAUFFAGE AVEC LA FONCTION MICRO-ONDES Utilisez cette fonction pour la cuisson normale ou le réchauffage rapide d’aliments tels que les légumes, les poissons, les pommes de terre et la viande. 1 3 2 5 1. Amenez le bouton multifonctions sur la position micro-ondes. 2. Tournez le bouton +/- pour régler le temps de cuisson. 3. Appuyez sur la touche Enter (Retour) pour sélectionner la puissance. 4. Tournez le bouton +/- pour régler la puissance désirée. 5.
GRIL Utilisez cette fonction pour dorer rapidement la surface des aliments. 1 2 3 Pour les aliments tels que fromage, toasts, biftecks ou saucisses, placez la grille métallique au-dessus de la plaque à pâtisserie. 1. Amenez le bouton multifonctions sur la position Gril. 2. Tournez le bouton +/- pour régler le temps de cuisson. 3. Appuyez sur la touche Start (Démarrage).
TURBO GRIL COMBINÉ Utilisez cette fonction pour cuire des gratins, des lasagnes, des volailles et des pommes de terre. 1 3 2 5 1. Amenez le bouton multifonctions sur la position Turbo Gril Combiné. 2. Tournez le bouton +/- pour régler la puissance. 3. Appuyez sur la touche Enter (Retour) pour sélectionner le temps de cuisson. 4. Tournez le bouton +/- pour régler le temps de cuisson. 5. Appuyez sur la touche Start (Démarrage). À ne pas utiliser avec cette fonction.
CHALEUR PULSÉE Utilisez cette fonction pour cuire des meringues, des pâtisseries, des gâteaux mousseline, des soufflés, de la volaille et des rôtis. 1 3 5 24 1. Amenez le bouton multifonctions sur la position Chaleur Pulsée. 2. Tournez le bouton +/- pour régler la température. 3. Appuyez sur la touche Enter (Retour) pour sélectionner le temps de cuisson. 4. Tournez le bouton +/- pour régler le temps de cuisson. 5. Appuyez sur la touche Start (Démarrage).
FONCTIONS AUTOMATIQUES Les fonctions automatiques de ce four doivent connaître le poids net des aliments. Le four calcule automatiquement le temps nécessaire à la décongélation ou à la cuisson en fonction du poids. 1 2 4 6 35 1. Amenez le bouton multifonctions sur la position Auto. 2. Appuyez sur la touche Auto pour sélectionner la fonction automatique souhaitée. 3. Tournez le bouton +/- pour choisir la famille d’aliments. 4. Appuyez sur la touche Enter (Retour): le poids par défaut s’affiche. 5.
DÉCONGÉLATION Utilisez cette fonction pour décongeler de la viande, des volailles, du poisson, des légumes ou du pain. Pour les aliments non indiqués dans le tableau ci-dessous, procédez comme indiqué au paragraphe «Cuisson et réchauffage aux microondes» et réglez la puissance sur 160 W pour la décongélation. Placez toujours les aliments sur le plateau tournant en verre. À ne pas utiliser avec cette fonction.
RÉCHAUFFAGE AUTOMATIQUE Utilisez cette fonction pour réchauffer des plats précuisinés ou du lait. Disposez les aliments sur un plat résistant à la chaleur et adapté aux micro-ondes. Lorsque vous conservez un repas au réfrigérateur ou que vous le disposez sur un plat pour le réchauffer, placez les aliments les plus épais et les plus denses à l’extérieur et les aliments les moins épais et moins denses au milieu. Superposez les fines tranches de viande ou disposez-les de manière à ce qu’elles se chevauchent.
CUISSON AUTOMATIQUE Utilisez cette fonction UNIQUEMENT pour la cuisson. La fonction Cuisson automatique ne peut être utilisée qu’avec les familles d’aliments indiquées ci-dessous. Utilisez la fonction «Cuisson et réchauffage aux micro-ondes» pour les aliments ou les poids non indiqués dans la liste.
CHALEUR PULSÉE COMBINÉE AUTOMATIQUE Utilisez cette fonction pour les aliments énumérés ci-dessous. Pour poulets et lasagne; assurez-vous que le plat que vous allez utiliser est résistant à la chaleur et qu’il est perméable aux micro-ondes avant de l’utiliser. Sinon vous risquez d’obtenir de piètres résultats. Utilisez toujours la plaque à pâtisserie pour cuire des biscuits et des petits pains prêts à cuire ou surgelés.
ENTRETIEN ET NETTOYAGE Un nettoyage normal est le seul entretien requis pour cet appareil. Pour nettoyer le four, vous devez d’abord le débrancher. Si le four n’est pas maintenu propre, cela peut entraîner la détérioration de la surface: la durée de vie de l’appareil pourra en être affectée et provoquer des situations de danger. N’utilisez jamais d’éponges abrasives pour nettoyer la cavité du four. En effet, vous pourriez rayer la surface.
DIAGNOSTIC DES PANNES Si le four ne fonctionne pas, veuillez vérifier les éléments suivants avant de contacter votre Revendeur: * Le support du plateau tournant et le plateau tournant sont en place. * La prise de courant est bien branchée. * La porte est correctement fermée. * Les fusibles sont en bon état et la puissance de l’installation est adaptée. * Vérifiez que le four est bien ventilé. * Attendez 10 minutes et essayez à nouveau. * Ouvrez et refermez la porte avant d’essayer à nouveau.
INFORMATIONS POUR LE RECYCLAGE Les matériaux d’emballage sont entièrement recyclables comme l’indique le symbole de recyclage. Suivez les règles locales en vigueur en matière d’élimination des déchets. Ne laissez pas les éléments d’emballage (sachets en plastique, éléments en polystyrène, etc.) à la portée des enfants. Cet appareil porte le symbole du recyclage conformément à la Directive Européenne 2002/96/CE concernant les Déchets d’Équipements Électriques et Électroniques (DEEE ou WEEE).
REMARQUE PARTICULIÈRE Lorsque le four a terminé de fonctionner, il exécute une procédure de refroidissement. Cela est normal. Après cette procédure, le four s’arrête automatiquement. La procédure de refroidissement peut être interrompue, sans aucun dommage pour le four, en ouvrant la porte. DONNÉES POUR LES ESSAIS ET PERFORMANCES DE CHAUFFAGE Selon la norme CEI 60705.