AUTOMATIC WASHER W-4 TABLE OF CONTENTS Welcome ................................................... 1 Safety Instructions................................ 2 Controls At A Glance ........................ 3-4 Special Features..................................... 5 Operating Tips ........................................ 6 Care and Cleaning ................................. 7 Storing the Washer ............................... 7 Water Use................................................. 7 Before You Call ........
Models: LAT9356 • LAT9357 • LAT9360 • LAT9416 Welcome Welcome and congratulations on your purchase of a Consumer Rated No.1 Maytag Washer! Your complete satisfaction is very important to us. Read this manual for best results. It contains instructions to acquaint you with proper operating and maintenance procedures. In addition you will find a Laundering Tips guide packed with your washer. It contains information on recommended laundering procedures, stain removal and special laundering situations.
Important Safety Instructions WARNING — To reduce the risk of fire, explosion, electric shock, property damage or injury to persons when using your appliance, follow basic precautions, including the following: 1. Read all instructions before using the appliance. from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time. 2.
Controls At A Glance Step 1 Select Cycle (Features may vary according to model.) Press the control knob in and turn clockwise to the desired cycle. Pull the knob out to start the washer. REGULAR is used for normal, sturdy fabrics. Cycles available: EXTRA HEAVY (select models) – approximately 16-18 minutes of wash time DELICATES is designed for items requiring delicate wash action.
Step 2 Select Water Level (Features may vary according to model.) Turn the WATER LEVEL knob to the setting that matches the size of the load. WATER LEVEL SETTING Select models offer infinite settings. Choose a specific setting or any point in between. If more water is needed once the fill is complete, turn the knob to reset and then to the proper setting.
Special Features Bleach Dispenser (select models) The dispenser automatically dilutes liquid chlorine bleach before it reaches your wash load. To use, follow these steps: 1. Measure liquid chlorine bleach carefully, following the instructions on the bottle. 2. Add the bleach to the dispenser before adding the load. Avoid splashing or over-filling the dispenser. NOTE: • Never pour undiluted liquid chlorine bleach directly onto the load or into the wash tub.
Operating Tips For detailed information on sorting, pretreating stains, etc., see the enclosed Laundry Tips pamphlet. Loading • Put dry, unfolded clothes loosely in the tub, up to the top row of holes for a maximum load. Detergent • Do not wrap large items like sheets around the agitator. • Use either liquid or granular laundry detergent. For best results, be sure detergent is added to the washer BEFORE the load and be sure wash water is above 65º F. • Mix large and small items for best circulation.
Care and Cleaning Interior – hard water deposits may be removed, if needed, using a recommended cleaner labeled washer safe. Turn off the water faucets after finishing the day’s washing. This will shut off the water supply to the washer and prevent the unlikely possibility of damage from escaping water. Lint Filter – it is self-cleaning and requires no maintenance. The filter is located under the agitator on the bottom of the washtub.
Before You Call For problem laundry solutions (i.e. fabric damage, residue, tangling) and special laundry care procedures, see the enclosed Laundry Tips pamphlet. Check these points if your washer... Won’t Fill • Plug cord into live electrical outlet. • Check fuse or reset circuit breaker. • Turn the control knob to proper cycle and pull knob out to start the washer. If equipped with buttons, be sure they are fully depressed. • Turn both faucets on fully. • Straighten inlet hoses.
Before You Call (continued) Check these points if your washer... Stops Leaks Water Is Noisy Fills with the Wrong Temperature Water • Unevenly distributed load. Redistribute the load, close the lid and pull knob out. Check for leveling. Be sure water level is acceptable for load size. • Plug cord into live electrical outlet. • Check fuse or reset circuit breaker. • Turn the control knob to proper cycle and pull knob out to start the washer. If equipped with buttons, be sure they are fully depressed.
Notes 10
W Y T RRAN A Automatic Washer Warranty Full One Year Warranty For one (1) year from the date of original retail purchase, any part which fails in normal home use will be repaired or replaced free of charge.
