Installation guide

ManualsBrandsWhirlpool ManualsMicrowaveOfficial Whirlpool compact microwave

" I

E_V

Quick Refecence

TabNeof Contents:

Pages

[_] Before you start

[] Product dimensions

[] Location

[] EHectdcalrequirements

[_ HnstaHHation steps

Read and save these

IMPORTANT:

Installer: Leave InstaHHafion

Hnstrucfions with the homeowner.

Homeowner: Keep HnstaHHafion

Hnstrucfions for future reference.

Read and save these instructions for

HocaHeHectdcaH inspector's use.

For quick reference, please record the following:

Model Number

Serial Number

Model/Serial plate iocated on the oven behind the door.

Date of Purchase

Dealer Phone No.

www.whidpooLcom

Part No. 8204864/3828W5U0311

Summary of content (4 pages)

PAGE 1
" I E_V / / / / Quick Refecence TabNe of Contents: Pages [_] Before you start [] Product dimensions [] Location [] EHectdcalrequirements [_ HnstaHHation steps www.whidpooLcom Read and save these For quick IMPORTANT: Installer: Leave InstaHHafion Hnstrucfions with the homeowner. Homeowner: Hnstrucfions Read Keep HnstaHHafion for future reference. and save these instructions HocaHeHectdcaH inspector's use.
PAGE 2
Tools recommended for installation: Before you start... Your safety others and the safety are very of Assemble the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. oven is intended Check the cabinet: screwdriver The cabinet drill (30.5 cmt deep.
PAGE 3
Eiectr@ai requirements Installation steps Slide the Excessive Plug into a grounded Do not remove 1/2" - 9/4" (!2.7 mm9/4"- 1" (!9.1 mm- on only. Number of spacers 0- 2 19.1 ram) 2- 9 25.4 mm) 9-4 Hazard 3 prong ground of spacers screws 0 - 1/2" (0 - 12.7 ram) Failure to do so can result in back or other injury, Shock number Distance "A" Weight Hazard Use two or more peopme to move and instal[ microwave oven. Electrical the correct back mounting outlet. prong.
PAGE 4
TempJate Drilling from inside the cabinet Drilling exending or Piace tempiate inside the cabinet so that the front iine of theTempiate A wHi be aligned with the front edge of the cabinet. If necessary, cut some areas of the tempiate in order to make it fit property within cabinet. at bottom of page. B from line. template 2.