Operation Manual
OBU 206
PRODUCT DESCRIPTION SHEET
DE AT FR NL BE ES IT SE NO DK FI PL CZ SK HU RU
5019 610 54442
0
Off
Oven light
STATIC FUNCTION
Use when all the food is on the same runner level.
-
Pre-heat the oven to the required cooking temperature and place the food inside as soon as the red
thermostat indicator light switches off.
-
Ideally, the shelf should be on the second runner level when using the static function.
STATIC FUNCTION + FAN
Use this function when cooking on two different levels.
-
Oven pre-heating is not necessary (except for pizzas and focaccia).
-
Switch the position of the dishes in the oven 10 minutes before the end of cooking time.
-
Remove the cooked dish and, if necessary, continue cooking the other one for as long as required.
GRILL FUNCTION
Use the grill function to cook small pieces of meat (steaks, sausages) and for making toasts.
-
The oven door must be closed during the cooking cycle.
-
Pre-heat the grill for about 5 minutes.
-
Arrange the meat on the grid with the drip tray underneath. Pour water in the drip tray to cover the bottom to
reduce smoke and fat spatters.
-
Turn over the meat about half-way through cooking time.
GRILL + FAN FUNCTION
Ideal for large joints, pork, chicken and roast beef.
-
The oven door must be closed during the cooking cycle.
-
Place the meat on the grid with the drip tray underneath. Pour water in the drip tray to cover the bottom to
reduce smoke and fat spatters.
-
Turn over the meat about half-way through cooking time.
DEFROST FUNCTION
Ideal for thawing frozen food to room temperature.
-
The food should be inserted in the oven in its wrapping to prevent it from drying out.
Turn the selector knob to the required symbol.
The oven light switches on.
• Turn the thermostat knob clockwise to the required temperature.
The red thermostat indicator light switches on.
• When the required temperature is reached, the red thermostat indicator light switches off.
End of cooking cycle:
• Return the knobs to the OFF position (0 - •).
1.
Turn the knob fully clockwise.
2.
Return the knob to the required cooking time.
3.
When the preset cooking time has elapsed, the oven switches off.
-
To use the oven without programming the cooking time, set the knob to .
Warning:
If the programmer is on “0” the oven will not switch on: to switch on the oven,
either set the programmer knob to or set the required cooking time.
OVEN
First
Last
First...Last
: Runner positions
1.
Control panel
2.
Cooling fan (not visible)
3.
Upper heating element
4.
Grill element (can be lowered)
5.
Oven light
6.
Fan
7.
Lower heating element (not visible)
8.
Oven door hinges
9.
Oven cool door
Accessories :
•Grid
• Baking tray
• Drip tray
CONTROL PANEL
1
Oven functions selector knob
2.
Oven thermostat knob
3.
Thermostat indicator light
4.
Mechanical Automatic Off
5.
Cooktop control knob
0 1 ...
10
*
6.
Cooktop control knob
0 1 ...
10
*
7.
Cooktop control knob
0 1 ...
10
*
8.
Cooktop control knob
0 1 ...
10
*
9.
Cooktop “ON” indicator light
*The cooktop control knobs are not interchangeable. After cleaning or servicing, they must be returned
to their original positions (see the above diagram next to each knob).
N.B.: The cooling fan can runs continuously at different speed according to the temperature value of the
components when the cooktop or the oven are in use.
The fan may continue to run for the time necessary to ensure sufficient cooling of the components and
adjacents kitchen units after the appliances have been switched off.
OVEN FUNCTIONS
SWITCHING THE OVEN ON
PROGRAMMING COOKING TIME