Instruction for Use

EN8
CONTROL PANEL DESCRIPTION - OVEN
4. CONTROL KNOB FOR FRONT LEFT HOTPLATE 0 1 2…9
5. CONTROL KNOB FOR REAR LEFT HOTPLATE 0 1 2…9
6. CONTROL KNOB FOR REAR RIGHT HOTPLATE 0 1 2…9
7. CONTROL KNOB FOR FRONT RIGHT HOTPLATE 0 1 2…9
Control panel
Switching on and adjusting cooking zones
After positioning the pot on the chosen cooking zone, select the required power level by turning the knob clockwise. Each cooking zone has different heat settings,
ranging from “1” (minimum power) to “9” (maximum power).
When a knob is set to a power setting between 1 and 9 the hob indicator light switches on.
Important! At the position indicated by a “______” on the cooktop knobs there is no function: the heating element is switched off.
Important! If no pot is placed on the hob or if the pot used is not suitable for an induction hob, the cooking zone selected will switch off after 1 minute. To reactivate
it: place a pot that is suitable for the induction hob (see section “Before use”) on the desired cooking zone, turn the knob to “0” and then select the desired heat setting.
Switching off cooking zones
Turn the knob to “0”.
• Read and follow the instructions given in the section “Instructions for use”.
• Make sure there is not a power outage.
• Dry the hob thoroughly after cleaning it.
INSTRUCTIONS FOR USE
TROUBLESHOOTING GUIDE
4 6 75 1 23
DISPLAY
DISPALY
Power levels No function
Cooking zone positioning
Level selector