Operating Instructions HOB Contents GB English, 1 Installation, 2-3 Positioning Electrical connections Description of the appliance, 4 Overall view Precautions and tips, 5 General safety Disposal Practical Advice on Using the Electric Hot Plates Maintenance and care, 6 Switching the appliance off Cleaning the appliance Technical data PI 604GB Assistance, 7 GB
Installation Fastening Clamps - Assembly Diagram 20 Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance. 30 Before operating your new appliance please read this instruction booklet carefully. It contains important information for safe use, installation and care of the appliance. Clamp Position for H=20mm top Positioning Clamp Position for H=30mm top Front Keep packaging material out of the reach of children.
Supply cable installation GB The electrcic hobs are supplied without cable. Use a cable: H05 VV-F 3x2.5mm Open the terminal box by removing the "V" screw and taking off the cover. Electrical connection The following installation procedure must be carried out by a qualified electrician. the cooker must be connected to the mains by a switched (double pole) cooker outlet correctly fused with a capacity appropriate to that shown on the hob Rating Plate.
Description of the appliance GB Overall view ELECTRIC PLATE Pilot lamp of the ELECTRIC PLATE Control knobs for the cook-top ELECTRIC PLATE The ELECTRIC PLATE vary in diameter and power: "normal" and "fast". The latter can be identified by a red boss in the center of the hot plate itself. The position of the corresponding electric hot plate is indicated on each control knob. The ELECTRIC PLATE ON indicator light switches on whenever the knob is moved from the 'off' position.
Precautions and tips This appliance has been designed and manufactured in compliance with international safety standards. The following warnings are provided for safety reasons and must be read carefully. General safety This manual is for a class 3 built-in cooktop. These instructions are only valid for the countries the symbols for which appear on the manual and the serial plate. Do not leave the electric plate switched on without a pan placed on it.
Maintenance and care GB Switching the appliance off Disconnect your appliance from the electricity supply before carrying out any work on it. Technical characteristic DATA PLATE Electrical section Cleaning the appliance Do not use abrasive or corrosive detergents, stain removers, anti-rust products, powder detergents or sponges with abrasive surfaces: these may scratch the surface. Never use steam cleaners or pressure cleaners on the appliance.
Assistance Communicating: appliance model (Mod.) serial number (S/N) This information is found on the data plate located on the appliance and/or on the packaging.
09/2006 - 195045861.