Specifications

ManualsBrandsWhirlpool ManualsAir ConditionerPORTABLE AIR CONDITIONER

INSTRUCTIONS FOR USE

PORTABLE AIR CONDITIONER WITH

GREEN

GAS

PREPARATION BEFORE USE

SAFETY PRECAUTIONS

INTRODUCTION

IDENTIFICATION OF PARTS

REMOTE CONTROL

OPERATION INSTRUCTIONS

MAINTENANCE

TROUBLESHOOTING

PROTECTION

INSTALLATION INSTRUCTIONS

ELECTRICAL CONNECTION

This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and

Electronic Equipment (WEEE).

By ensuring this product is disposed of correctly, you will help prevent potential negative

consequences for the environment and human health, which could otherwise be caused by

inappropriate waste handling of this product.

The symbol on the product, or on the documents accompanying the product, indicates that

this appliance may not be treated as household waste. Instead it shall be handed over to the

applicable collection point for the recycling of electrical and electronic equipment.

Disposal must be carried out in accordance with local environmental regulations for waste

disposal.

For more detailed information about treatment, recovery and recycling of this product, please

contact your local city office, your household waste disposal service or the shop where you

purchased the product.

Downloaded from AC-Manual.com Manuals

Summary of content (16 pages)

PAGE 1
INSTRUCTIONS FOR USE PORTABLE AIR CONDITIONER WITH GREEN GAS PREPARATION BEFORE USE SAFETY PRECAUTIONS INTRODUCTION IDENTIFICATION OF PARTS REMOTE CONTROL OPERATION INSTRUCTIONS MAINTENANCE TROUBLESHOOTING PROTECTION INSTALLATION INSTRUCTIONS ELECTRICAL CONNECTION This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE).
PAGE 2
PREPARATION BEFORE USE Before using the air conditioner, be sure to check and preset the following. • Remote Control presetting The remote control is NOT preset as Cooling Only Air Conditioner or Cooling Air Conditoner with Electric Heater by manufacturer. Each time the remote control batteries are replaced, the Cooling indicator and Heating indicator will flash alternately on the remote control LCD.
PAGE 3
INTRODUCTION Thank you for choosing this portable air conditioner. It will provide you and your family with all the Home Comfort requirements you may need for your home, cottage or office. The appliance can easily be moved from room to room and set up in just a few minutes. It is a multi-functional room air exchanging, air-processing appliance, designed to offer you the functions of: Air Conditioning, Dehumidifying, Heating and Independent Fan.
PAGE 4
IDENTIFICATION OF PARTS Front Back Front 1 - Control panel 2 - Air outlet 3 - Signal receiver 4 - Remote control 5 - Transport handle Back 6 - Air outlet hose 7 - Evaporator air intake 8 - Rubber plug 9 - Drain Hose J - Power supply cord NOTE: The above drawing is a simplified representation of the air conditioner, which may differ slightly from the actual appliance you have purchased. Downloaded from AC-Manual.
PAGE 5
Control Panel A - ON/OFF button: to start or stop the appliance B - MODE button: to select the operation mode C - FAN button: to select the fan speed D - TIMER ON button: to set or cancel the Timer On function E - TIMER OFF button: to set or cancel the Timer Off function F - TEMP.
PAGE 6
REMOTE CONTROL The remote control transmits signals to the system. A. ON/OFF button Press this button to start the appliance when it is connected to the power supply or to stop it when the appliance is running. B. MODE button Used to select the operation mode. C. SWING button Used to adjust the direction of air flow. D. 6th Sense button To enable fuzzy logic function when the unit is either on or off. E. button To display temperature in either °C or °F F.
PAGE 7
How to insert the batteries • Remove the battery cover in the direction of the arrow. • Insert new batteries making sure that the (+) and (-) of battery are matched correctly. • Refit the cover by sliding it back into position. NOTE: • Use 2 AA (1.5 V) batteries. Do not use rechargeable batteries. Replace batteries with new ones of the same type when the display becomes dim. TO BE DONE BY THE USER - If the batteries are replaced within 1 minute, all remote control settings will be preserved.
PAGE 8
OPERATION INSTRUCTIONS Operating modes 1. Selecting mode Each time the MODE button is pressed, operating mode changes in the following sequence: COOLING DRY FAN ONLY HEATER 2. “FAN” mode Each time the “FAN” button is pressed, the fan speed changes in the following sequence: AUTO HIGH LOW IMPORTANT: • In “FAN ONLY” mode, only “High” and “Low” are available. • In “DRY” mode, airflow is set at “Low” automatically, “FAN” button is ineffective in this case. 3 1 2 4 3.
PAGE 9
Heater mode 1. Press the MODE button and select heater mode. 2. You can set TIMER ON or TIMER OFF in heating mode. Additional instructions 1. If you select cooling or dry mode while the appliance is in another mode, the compressor will be delay-protected. Wait for 3~5 minutes, after which the appliance will run again. Do not press any button during the waiting time, or the appliance will re-count the protection time. 2.
PAGE 10
Timer on setting Setting the timer with the TIMER ON function when leaving the house in the morning is ideal to find a comfortable room temperature on your return. When you press TIMER ON, the ON indicator and 12:00 flash on the display. Press the or , to increase or decrease the set time by 10 minutes. Press and hold for 1.5 seconds to increase or decrease the set time in continuous 10 minute steps. Time can be set up to 24 hours in advance.
PAGE 11
MAINTENANCE Appliance maintenance Unplug from the power supply Stop the appliance before unplugging. Wipe with a soft, dry cloth Use lukewarm water (below 40°C) to clean the appliance when it is very dirty. • Use a dry, soft cloth to clean it. Never use volatile substances such as gasoline or polishing powder to clean the unit. Never sprinkle water on the indoor unit • Danger! Electric shock! Air filter maintenance It is necessary to clean the air filter after approx. 100 hours of operation.
PAGE 12
TROUBLESHOOTING Trouble Analysis • Has the protection device or fuse blown? • Please wait for 3 minutes and start again, the protection device may be preventing the unit from running. • Are the remote control batteries low? • Is the plug unplugged? Will not run Runs for a short while only • If the set temperature is close to room temperature, try lowering it. • Are the air conditioner intakes and outlets obstructed? • Is the door or window open? Are any other appliances such as heaters, lamps etc.
PAGE 13
INSTALLATION INSTRUCTIONS Installation accessories Description Quantity Air outlet hose ............................................................................. 1/set stretches from 17 3/4”(45cm) up to 70 4/5”(180cm) Window/patio door slider kit Window exhaust adapter........................................................... 1/set Adapter......................................................................................... 1/set Air outlet hose Window/patio door slider kit.......................
PAGE 14
Installation sequence • Double Hung Window 1. Remove the appropriate plugs (save in a secure place) from the window slider to prepare for either a double hung window installation or a slider window installation. Line up the holes on the rain cover and the window slider. Use the bolts, gaskets and nuts to attach the rain cover onto the window slider. Remove these two plugs from the window slider 2. Attach the exhaust adapter to the window slider.
PAGE 15
• Sliding Window 1. Remove the appropriate plugs (save in a secure place) from the window slider to prepare for either a double hung window installation or a slider window installation. Line up the holes on the rain cover and the window slider. Use the bolts, gaskets and nuts to attach the rain cover onto the window slider. Remove these two plugs from the window slider 2. Attach the exhaust adapter to the window slider.
PAGE 16
ELECTRICAL CONNECTION 1) For Great Britain only Warning - this appliance must be earthed Fuse replacement If the mains lead of this appliance is fitted with a BS 1363A 13amp fused plug, to change a fuse in this type of plug use an A.S.T.A. approved fuse to BS 1362 type and proceed as follows: 1. Remove the fuse cover (A) and fuse (B). 2. Fit replacement 13A fuse into fuse cover. 3. Refit both into plug.