Operation Manual

• If the dryer has to be installed due to lack of space

directly next to a gas or coal stove, a heat insulating

plate (85 x 57 cm) has to be installed in between,

whose side against the stove has to be covered with

aluminium foil.

• A built-in installation is not allowed for the tumble dryer.

• The dryer can be built-under a worktop. A sufficient

ventilation of the dryer must be assured. Assemble a

ventilation grid (minimum 45 cm x 8 cm), in the rear

part of the worktop where the dryer is built under.

4. Assembly of distance holders

To ensure a correct distance of the appliance from the

wall at the rear side and allow a sufficient ventilation,

distance holders have to be mounted on the dryer rear

side before starting the first drying cycle.

A. Remove the two distance holders from the packaging.

B. The distance holders have to be mounted on the

rear side of the dryer in the protection cover.

C. Insert the distance holders into the holes on both

sides.

D. Fix both distance holders by turning them in

clockwise direction until stop position.

5. User and child protection

•Children must not be allowed to play with the dryer.

• Ensure that children or small animals can not get into

the drum.

• Keep the packaging materials (plastic bags,

polystyrene parts, etc.) out of reach of children, as

they are potentially dangerous.

• The appliance is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a

person responsible for their safety. Children should

be supervised to ensure that they do not play with

the appliance.

Stacking kit

• Depending on the model of your

washing machine, your dyer can be

stacked on top of your front

loading washing machine.

For further information please

contact the After-Sales-Service.