Operation Manual

7
ELECTRICAL CONNECTION
1) For Great Britain only
Warning - this appliance must be earthed
Fuse replacement
If the mains lead of this appliance is fitted with a BS 1 363A 13amp
fused plug, to change a fuse in this type of plug use an A.S.T.A.
approved fuse to BS 1 362 type and proceed as follows:
1. Remove the fuse cover (A) and fuse (B).
2. Fit replacement 13A fuse into fuse cover.
3. Reinstall both into plug.
Important:
The fuse cover must be reinstalled when changing a fuse and if the fuse
cover is lost, plug must not be used until a correct replacement is
installed.
Correct replacements are identified by the color insert or the color
embossed in words on the base of the plug. Replacement fuse covers
are available from your local electrical store.
2) For the Republic of Ireland only
The information given in respect of Great Britain will frequently apply, but a third type of plug and socket is also used,
the 2-pin, side earth type.
3) Socket outlet / plug (valid for both countries)
If the fitted plug is not suitable for your socket outlet, please contact Whirlpool Service for further instruction. Please
do not attempt to change plug yourself. This procedure needs to be carried out by a qualified Whirlpool technician
in compliance with the manufactures instructions and current standard safety regulations.