Operation Manual

4
• If you want to install the dryer under a worktop, make sure that a ventilation grid
(minimum 45 x 8 cm) is inserted in the rear part of the worktop where the dryer
will be installed, to assure sufficient ventilation.
Stacking on a washing machine
• If you want to place the dryer on top of your washing
machine, first contact our After-Sales Service or your specialist
dealer to verify if this is possible. Stacking of a dryer is only
admitted if the dryer and your washing machine are
compatible, and if an appropriate stacking kit is available
through our After-Sales Service or your specialist dealer by
which the dryer can be safely fixed on the washing machine.
Electrical connection
• The dryer must only be connected to an earthed socket
which is in compliance with the current safety regulations
and which is appropriate for the values regarding
voltage, power consumption and protection
requirements as they are indicated on the rating
plate on the rear of the dryer.
• Do not use extension leads, extension leads with multiple sockets, or
adapters; they might cause a fire by overheating. If you need a longer mains
cable, contact our After-Sales Service.
• After installation, access to the mains plug or to disconnection from mains
supply by a double-pole switch must be ensured at all times, to make sure
the dryer can be separated immediately from the mains supply.
• For unplugging the dryer, do not pull the mains cable, to avoid damaging it.
Never touch the mains plug with wet hands, to avoid an electrical shock.