Use& CareGuide Glass cooktop I Solid element surface unit lndicaior light Model and serial number plate (on bottom of outer box) dontrol panel ELECTRIC COOKTOP RC8330XT
Contents Page Thank you for buying a Whirlpool appliance. Important Safety Instructions ___________.____.___.____ 3 Please complete and mail the Owner RegistraUsing Your Cooktop ______.___.._.________________,.,_,._,__ 4 tion Card provided with this product. Then Using the surface units ,................................... 4 complete the form below. Have this information Caring For Your Cooktop .._........ 6 ready if you need service or call with a question. Control knobs and glass cooktop surface .. .....
ImportantSafetyInstructions To reduce the risk of fire, electrical shock, injury to persons, or including damage when using the cooktop, follow basic precautions, Read all instructions before using the cooktop. l Install or locate the cooktop only in accordance with the provided Installation Instructions. It is recommended that the cooktop be installed by a qualified installer. The cooktop must be properly connected to electrical supply and grounded.
UsingYourCooktop Using the surface units Control knobs must be pushed in before turning them to a setting. They can be set anywhere between HI and OFF. Surface unit indicator light One of the surface unit indicator lights on the control panel will glow when a surface unit is on. Burn and Fire Hazard Be sure all control knobs are turned to OFF and the indicator lights are OFF when you are not cooking. Someone could be burned or a fire could star-f if a surface unit is accidentally left ON.
Using Your Cooktop Contmued Solid element surface units Before placing a pan on solid element surface units for the first time, heat on HI setting for five minutes. The surface units will give off smoke as the protective coating, applied at the factory, finishes bonding to the surface. Solid element surface units are made of heavy cast-iron to provide even cooking. Each surface unit has a built-in protective limiter as a safety feature.
CaringForYourCooktop Burn and Electrical Shock Hazard Make sure all controls are off and the cooktop is cool before cleaning. Failure to do so can result in burns or electrical shock. Control knobs and glass cooktop surface 1. Turn control knobs to the OFF position. 2. Pull control knobs straight off. 3. Use warm, soapy water or spray glass cleaner and a soft cloth to wipe the glass cooktop surface. Rinse and wipe dry with a soft cloth. 4. Wash control knobs in warm, soapy water.
Caring For Your Cooktop Continued Cleaning tips Control knobs Clean with warm, soapy water and a soft cloth. l Wash, rinse and dry well. l Do not soak. Glass cooktop surface Clean with warm, soapy water or spray glass cleaner and a soft cloth. . Wipe off regularly when cooktop is cool. l Follow directions provided with the cleaner. Use a non-abrasive plastic scrubbing pad for heavily-soiled areas. l Do not use abrasive or harsh cleansers.
If YouNeedServiceOrAssistance... We suggest you follow these steps: 1. Before calling for assistance... Performance problems often result from little things you can find and fix without tools of any kind. If nothing operates: Is the power supply cord plugged into a live circuit with the proper voltage? (See Installation Instructions.
Notes 10
Notes
WHIRLPOOr ElectricCookingProductWarranty ER004 LENGTH OF WARRANTY WHIRLPOOL FULL ONE-YEAR WARRANTY From Date of Purchase FSP(* replacement parts and repair labor to correct defects in materials or workmanship. Service must be provided by an authorized WhirlpoolSM service company. WHIRLPOOL WILL PAY FOR WILL NOT PAY FOR A. Service calls to: 1. Correct the installation of the cooking product. 2. Instruct you how to use the cooking product. 3. Replace house fuses or correct house wiring. 4.
