SELF-CLEANiNG ELECTRIC RANGE Use And Care Guide

The oven light
(Models RF365PXD and RF360BXD)
Both models: The oven light will come on
when you open the oven door.
Model RF365PXD: To turn the light on
when the oven door is closed, press the
Oven Light Switch on the control panel.
Electrical Shock Hazard
l Make sure oven and light bulb are
cool and power to the range has been
turned off before replacing the light
bulb.
.The bulb cover must be in place when
using the oven. The cover protects
the bulb from breaking, and from high
oven temperatures. Because bulb
cover is made of glass, be careful not
to drop it.
Failure to follow the above could result
in electrical shook, burns, or injury from
broken alass.
To replace the oven light:
1. Unplug appliance or disconnect at the
main power supply.
2. Remove the glass bulb cover in the back
of the oven by screwing it out counter-
clockwise.
3. Remove the light bulb from its socket.
Replace the bulb with a 40-watt appli-
ance bulb.
4. Replace the bulb cover by screwing it in
clockwise. Plug in appliance or recon-
nect at the main power supply.
NOTE: The oven light will not work during
the Self-Cleaning cycle.
31