ELECTRIC RANGE Use & Care Guide RF360BXW

Adjusting the Oven Temperature Control

Does your oven seem hotter or colder than your old oven? The temperature of

your old oven may have shifted gradually without your noticing the change.

Your new oven is properly adjusted to provide accurate temperatures. But when

compared to your old oven, the new design may give you different results.

If after using the oven for a period of time, you are not satisfied with the

temperature settings, they can be adjusted by following these steps:

LOCKING SCREWS

Pull the Oven Temperature Control

Knob straight off.

NOTCHES T6OTH

3. To lower the temperature,

move

the tooth a notch closer to LO.

Each notch equals about 10°F

(5°C).

2. Loosen the locking screws inside

the control knob.

Note the posi-

tion of the notches.

TOOTH NOTCHES

4. To raise the temperature,

move

the tooth a notch closer to HI. Each

notch equals about 10°F (WC].

Tighten the locking screws and

replace the control knob.