SELF-CLEANiNG ELECTRIC RANGE Use And Care Guide
Table Of Contents
- front cover
- table of contents
- a note to you
- range safety
- getting to know your range
- using your range
- using the surface units
- positioning racks and pans
- for best air circulation
- using aluminum foil for baking
- the electronic oven control
- setting the clock
- using the electronic minute timer
- starting a function
- canceling a function
- baking/roasting
- adjusting the oven temperature control
- broiling
- broiling tips
- energy saving tips
- the oven vent
- the storage drawer
- the anti-tip bracket
- optional door panel pac
- using the self-cleaning cycle
- caring for your range
- troubleshooting
- requesting assistance or service
- index
- warranty
![](/manual/whirlpool/rf370pxd/self-cleaning-electric-range-use-and-care-guide/images/img-15.png)
Starting a function
After programming a function, you must
press the Start/Enter pad to start the
function.
Canceling a function
The Off/Cancel pad will cancel any function
ill
except for the Clock and Timer Set
functions. When you press the Cffl
Cancel pad, the display will show the
time of day or, if Minute Timer is also
being used, the time remaining.
Baking/roasting
1. Position racks.
For more information, see “Positioning
racks and pans” on page 10.
2. Choose baking/roasting setting.
PRESS
YOU SEE
3. Set temperature (optional).
Do this step if you want to set a tempera-
ture other than 350°F. Press A to raise
the temperature or V to lower the temp-
erature in 5°F amounts. Use these pads
until the desired temperature shows on
the small display.
PRESS YOU SEE
(example for Bake at 375’F)
4. When roasting or cooking
casseroles, put food in oven.
You do not have to preheat the oven
when roasting or cooking casseroles.
continued on next page
15