SELF-CLEANiNG ELECTRIC RANGE Use And Care Guide
Table Of Contents
- front cover
- table of contents
- a note to you
- range safety
- getting to know your range
- using your range
- using the surface units
- positioning racks and pans
- for best air circulation
- using aluminum foil for baking
- the electronic oven control
- setting the clock
- using the electronic minute timer
- starting a function
- canceling a function
- baking/roasting
- adjusting the oven temperature control
- broiling
- broiling tips
- energy saving tips
- the oven vent
- the storage drawer
- the anti-tip bracket
- optional door panel pac
- using the self-cleaning cycle
- caring for your range
- troubleshooting
- requesting assistance or service
- index
- warranty
![](/manual/whirlpool/rf370pxd/self-cleaning-electric-range-use-and-care-guide/images/img-24.png)
Before setting the controls
l Make sure clock is set to correct
time of day. (See “Setting the
clock” on page 13.)
@Move Lock Lever all the way to
the right -the Clean position.
Setting the controls
2. Set cleaning time (optional).
If you want a Self-Cleaning cycle longer
or shorter than 3% hours, use the Hour
and Minute pads to set the desired
cleaning time. Press the “up” (A) or
“down” (r) pad(s) until a time between
2%-4X hours shows on the display.
l Use 2% hours for light soil.
l USe WA1/2 hours for moderate to
heavy soil.
PRESS
cleaning time)
3.
Start oven.
PRESS YOU SEE
NOTE: The display will show “door” and
a tone will sound once every 5 seconds
if the door is not latched (Lock Lever set
at the clean position).
24