Manual

To lockor deactivatethecontrolpanel:
Pressandhold the Start/Enter pad for 5
seconds. A single tone will sound
and "Loc" and _ will appear on the
temperature display. When the
control is locked, "START?" will
appear on the display and three tones will
sound if you press any command pad.
To unlock the control panel:
Press and hold the Start/Enter pad for 5
seconds. A single tone will sound
and "Loc" and _1 willdisappear
from the temperature display.
Setting the clock
NOTE: If you do not want the clock time
displayed, press and hold the Clock pad for
5 seconds. To display the clock time again,
press and hold the Clock pad for 5 seconds.
You should not have to reset the time.
1. Press Clock pad.
PRESS YOU SEE
CLOCK
2. Set time.
Press the "up" (A) or "down" (V) pad(s)
untilthe correct time shows on the
display.
PRESS
Z_ A
[,.II-i
[v IlVJ
YOU SEE
3. Start clock.
(example for 5:30)
PRESS YOU SEE
13