Manual

To cancel the Minute Timer:
Press Timer Off pad.
PRESS YOU SEE
Starting a function
After programming a function, you must
press the Start/Enter pad to start
the function. If you do not press
the Start/Enter pad within 5
seconds of programming,
"START?" will show on the display
as a reminder.
Canceling a function
The Off/Cancel pad will cancel any function
except for the Clock and Timer
Set functions. When you press the
Off/Cancel pad, the display will
show the time of day or, if
Minute Timer is also being
used, the time remaining.
Audible signals
Audible signals tell you if a function is
entered correctly or not. They also tell you
when a cycle is completed.
To shut off all signals except for the
end-of-timer and error tones:
Press and hold the Stop Time pad for 5
_ seconds. A short tone will sound
to tell you the signals have been
changed.
Repeat the above step to turn the signals
back on.
(time of day)
To choose between high and low volume
signals:
Press and hold the Delay Start Time pad for
5 seconds. A short tone will
sound to tell you the signals
have been changed. Either "HI"
or "LO" will appear on the time
display to show the volume
you chose.
15