Manual

Troubleshooting
Most cooking problems often are caused by little things you can find and fix without tools of
any kind. Check the lists below and on the next page before calling for assistance or service.
If you still need help, see "Requesting Assistance or Service" on page 49.
If nothing operates, check the following:
Is the range plugged into a live outlet with the proper voltage?
(See Installation Instructions.)
Have you blown a household fuse or tripped a circuit breaker?
Other possible problems and their causes:
PROBLEM CAUSE
The oven will not
operate
The surface units •
will not operate •
Control knob(s) •
will not turn
You have not set the electronic control correctly. Refer to the
section in this manual describing the function you are
operating.
You have programmed a delayed start time. Wait for the start
time to be reached or cancel and reset the control.
You have blown a household fuse or tripped a circuit breaker.
You have not set the control knobs correctly. Push control
knobs in before turning to a setting.
You are not pushing in before turning.
The Self-Cleaning
cycle will not
operate
• You did not press the Start/Enter pad.
• The Lock Lever is not in the Clean position - all the way to the
right.
You have programmed a delayed start time. Wait for the start
time to be reached or cancel and reset the control.
continued on next page
47