Manual

PROBLEM CAUSE
Cooking results are not oThe range is not level. (See Installation Instructions.)
what you expected
The oven temperature seems too low or too high. See
"Adjusting the oven temperature control" on page 18 to
adjust oven temperature.
• You did not preheat the oven before baking (if called for
in recipe).
• The recipe you are using may need to be altered to
improve the taste or appearance of the food.
• You are using a pan that is not the correct type or size.
Refer to a reliable cookbook or recipe for recommended
pan type and size.
• There is not enough air space around pan when baking.
Allow 11/2to 2 inches (4-5 cm) of air space on all sides of
pan. There must be a minimum space of 1 inch.
• The cooking utensil is too large or too small for the
surface unit being used. Pan should be the same size or
slightly larger than the surface unit being used.
The display is showing • There has been a power failure. Reset the clock.
"PF" (See page 13.)
"F" followed by a • The electronic control or temperature sensor has failed.
number shows on the Call for service. (See Step 2 on page 49.)
display
If none of these items was causing your problem, see "Requesting Assistance or Service"
on page 49.
48