SELF-CLEANING ELECTRIC SLIDE-IN RANGE Use and Care RS385PXB RS385PCB
Table Of Contents
- front cover
- table of contents
- a note to you
- important safety instructions
- parts and features
- using your range
- using the surface units
- positioning racks and pans
- for best air circulation
- using aluminum foil for baking
- the electronic oven control
- setting the clock
- using the electronic minute timer
- using the off/Cancel pad
- audible signals
- baking/Roasting
- adjusting the oven temperature control
- broiling
- broiling tips
- energy saving tips
- using the electronic MEALTIMER control
- the oven vent
- the storage drawer
- the anti-tip bracket
- using the Self-Cleaning cycle
- caring for your range
- if you need assistance or service
- warranty
If You Need Assistance
or Service
This section is designed to help you save the cost of a service call. Part 1 of this section
outlines possible problems, their causes, and actions you can take to solve each problem.
Parts 2 and 3 tell you what to do if you still need assistance or service. When calling our
Consumer Assistance Center for help or calling for service, please provide a detailed descrip-
tion of the problem, your appliance’s complete model
and
serial numbers arid the purchase
date. (See page 2.) This information will help us respond properly to your request.
1. Before calling for assistance . . .
Performance problems often result from little things you can find and fix without tools of any
kind. Please check the chart below for problems you can fix. It could save you the cost of a
service call.
PROBLEM
Nothing will
operate
The oven will
not operate
POSSIBLE CAUSE
The unit is not wired into a
live circuit with proper vott-
age.
A household fuse has blown
or a circuit breaker has
tripped.
You have not set the elec-
tronic control correctly.
You have programmed a
delayed start time.
SOLUTION
Wire the unit into a live circuit with
proper voltage. (See Installation
Instructions.)
Replace household fuse or reset
circuit breaker.
Refer to pages 11-22 for setting the
electronic control.
Wait for the star-l time to be reached.
The surface
A household fuse has blown Replace household fuse or reset
units will not
or a circuit breaker has
circuit breaker.
operate
tripped.
You have not plugged in Turn control knobs to OFF and plug
surface units all the way.
in surface units all the way. (See
“Replacing” on page 30.)
You are not setting the
Push control knobs in before turning
control knobs correctly.
to a setting.
Control
knob(s)
You are not pushing in before
Push control knob(s) in before turning
will not turn
turning.
to a setting.
The Seif-
The range clock does not Reset clock to show the correct time
Cleaning cycle
show the correct time of day. of day. (See page 12.)
will not operate
You have programmed a
Wait for the start time to be reached.
delayed start time.
continued on next page
35