Operating Instructions FRIDGE Contents GB English,1 Installation, 2-3 Positioning and connection Reversible doors Description of the appliance, 5 Overall view Accessories, 6 Start-up and use, 7-8 Starting the appliance Chiller system Using the refrigerator to its full potential Food hygiene Maintenance and care, 9 SAN 300 SAAN 300 SAN 400 SAN 400 S Switching the appliance off Cleaning the appliance Avoiding mould and unpleasant odours Defrosting the appliance Replacing the light bulb Precautions and t
Installation GB ! Before placing your new appliance into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance. Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Before using the appliance please read the instructions below. ! Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance.
Reversible doors Fitting a new plug GB IMPORTANT: WIRES IN THE MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE... Green and Yellow Blue Brown - Earth - Neutral - Live As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: - Connect Green and Yellow wire to terminal marked or coloured Green and Yellow. 'E' or - Connect Brown wire to terminal marked 'L' or coloured red or brown.
GB Stability bracket (Models SAN400 and SAN400S only): 1. WARNING: To prevent the fridge from tilting forwards, it must be held in place with the stability bracket supplied. This is the responsibility of the customer. 3. 2. 4. 5. 6. Position the fridge in its chosen location. Looking from the front of the fridge, mark the position of the left hand panel. Move the fridge far enough away to get clear access to the back wall.
Description of the appliance Overall view GB The instructions contained in this manual are applicable to different model refrigerators. The diagrams may not directly represent the appliance purchased. For more complex features, consult the following pages. TEMPERATURE control Lamp (see Maintenance) SHELVES• MULTI-USE* bin Removable lidded shelf with EGG TRAY Removable multipurpose SHELVES BOTTLE shelf FRUIT and VEGETABLE bin Levelling FEET Varies by number and/or position.
Accessories GB SHELVES: with or without grill. Due to the special guides the shelves are removable and the height is adjustable (see diagram), allowing easy storage of large containers and food. Height can be adjusted without complete removal of the shelf. 1 2 Play Zone*: Thanks to the new “Play Zone” bottle rack, you can cool several bottles, cans and energy drinks quickly to have them constantly at hand.
Start-up and use Starting the appliance ! Before starting the appliance, follow the installation instructions (see Installation). ! Before connecting the appliance, clean the compartments and accessories well with lukewarm water and bicarbonate. 1. Insert the plug into the socket and ensure that the internal light illuminates. 2. Turn the TEMPERATURE ADJUSTMENT knob to an average value. After a few hours you will be able to put food in the refrigerator.
GB Using the refrigerator to its full potential • Use the TEMPERATURE ADJUSTMENT knob to adjust the temperature (see Description). • Place only cold or lukewarm foods in the compartment, not hot foods (see Precautions and tips). • Remember that cooked foods do not last longer than raw foods. • Do not store liquids in open containers. They will increase humidity in the refrigerator and cause condensation to form. Food hygiene 1.
Maintenance and care Switching the appliance off Defrosting the appliance During cleaning and maintenance it is necessary to disconnect the appliance from the electricity supply: It is not sufficient to set the temperature adjustment knobs on (appliance off) to eliminate all electrical contact. ! Follow the instructions below. Do not speed up the defrosting process by using any tools or electrical devices, you may damage the refrigeration circuit.
Precautions and tips GB ! The appliance was designed and manufactured in compliance with international safety standards. The following warnings are provided for safety reasons and must be read carefully. This appliance complies with the following Community Directives: - 73/23/EEC of 19/02/73 (Low Voltage) and subsequent amendments; -89/336/EEC of 03.05.89 (Electromagnetic Compatibility) and subsequent amendments; - 2002/96/CE..
Troubleshooting If the appliance does not work, before calling for Assistance (see Assistance), check for a solution from the following list. Malfunctions: Possible causes / Solutions: The internal light does not illuminate. • The plug has not been inserted into the electrical socket, or not far enough to make contact, or there is no power in the house. The refrigerator and the freezer do not cool well. • • • • The food inside the refrigerator is beginning to freeze.
Assistance 195051290.00 02/2005 - Xerox Business Services Before calling for Assistance: • Check if the malfunction can be solved on your own (see Troubleshooting). • If after all the checks, the appliance still does not operate or the problem persists, call the nearest Service Centre model serial number GB Communicating: • type of malfunction • appliance model (Mod.) • serial number (S/N) This information can be found on the data plate located on the bottom left side of the refrigerator compartment.