SELF-CLEANING GAS BUILT-IN OVEN Use & Care Guide SB160PEX

Caring For Your Oven
Burn, Electrical Shock, Fire and Explosion
Hazard
l Make sure all controls are OFF and the
oven is cool before cleaning.
l Do not use oven cleaners, bleach or rust
removers.
l Do not use gasoline or other flammable
liquids or vapors to clean this or any
other appliance.
l Do not use your oven for storage.
l Keep the appliance area clear and free
from combustible materials, gasoline and
other flammable vapors and liquids.
l Do not obstruct the flow of combustion
and ventilation air.
Failure to follow these guidelines could
result in burns, electrical shock, fire or
explosion.
Control panel and command
buttons
1. Pull command buttons straight off.
2. Use warm, soapy water or spray glass cleaner
and a soft cloth to wipe the control panel.
Rinse and wipe dry with a soft cloth.
3. Wash command buttons in warm, soapy
water. Rinse well and dry with a soft cloth. Do
not soak.
4. Replace command buttons by pushing them
firmly into place.
NOTE: When cleaning, never use steel wool,
abrasives, or commercial oven cleaners which
may damage the finish. After cleaning, make sure
you have not turned oven on when replacing
buttons. If oven has been turned on, push Cancel
button.
18