Double Oven User Manual

ManualsBrandsWhirlpool ManualsOvenSCO-2443

ELECTRIC BUILT-IN

SINGLE & DOUBLE OVENS

MODELS (singles):

K ESO- 14OSIl45SIl7OS/176S

SW-1243/2433/1273/2733

M0DEL.S (doubles):

KELI0-240SE/245SS/270SEl276SS

SC02243124431227312743

INSTALLATION

INSTRUCTIONS

INSTALLER: FIMAL CHECK LIST

IMP0 RTANT:

LEAVE THESE INSTRUCTIONS FOR LSE BY LOCAL ELECTRICAL INSPECTOR

PLACEMENT OF UNIT

0 1. Properly positioned-level, aligned and ;quare with cabinet opening.

0 2. Anchored securely to cabinet.

0 3. Installation debris removed.

ELECTRICAL

0 1. Oven properly grounded.

0 2. Separate 120/240 volt or 120/208 voh, 60 hertz, single phase branch of proper

ampacity and protected by a fuse or circuit breaker with approved rating.

0 3. All connections made in accordance with local and/or National Electrical Code.

OPERATIONAL

0 1. Oven racks installed and slide freely ir all positions.

0 2. Knobs securely in place and rotate fre ?ly without rubbing edges of control panel glass

holes.

0 3. All lights function properly.

0 4. Clock timer buzzer operates.

0 5. Doors properly adjusted, open and clcse smoothly.

0 6. Selector switch functions in all modes

0 7. Unless instructed to leave for owner, remove all tags, labels and internal packing

materials.

0 8. Oven has been wiped clean to remove fingermarks and other smudges.

THANK YOlI INSTALLER:

1. Complete Installat on Check List.

2. Leave all literature for customer.

3. Notify dealer that installation is completed.

FOR

DETAILED

INSTRUCTIONS. FOLLOW METHODS

DESCRIBED IN THIS FOLDER.

Summary of content (4 pages)

PAGE 1
ELECTRIC BUILT-IN SINGLE & DOUBLE OVENS MODELS (singles): K ESO- 14OSIl45SIl7OS/176S SW-1243/2433/1273/2733 M0DEL.S (doubles): KELI0-240SE/245SS/270SEl276SS SC02243124431227312743 INSTALLATION INSTRUCTIONS INSTALLER: FIMAL CHECK LIST IMP0 RTANT: LEAVE THESE INSTRUCTIONS PLACEMENT OF UNIT 0 1. Properly positioned-level, 0 2. Anchored securely to cabinet. 0 3. Installation debris removed. FOR LSE BY LOCAL ELECTRICAL INSPECTOR aligned and ;quare with cabinet opening. ELECTRICAL 0 1.
PAGE 2
IMPORTANT: assure proper Read Before Installing to Save Time, Work, and owner’s warranty protection. performance, INSTALLATION CABINET INSTRUCTIONS CONTRUCTION The first item for the installation of the oven will be to secure an appropriate cabinet or provide a properly framed opening in the wall. Refer to Illustration and T;lbles below for the correct location and dimensions to use. A solid bottom or runners, spaced on 19% cent’?rs are required in the opening to support the oven.
PAGE 3
ELECTRICAL It is necessary to provide an appropriate junction box as shown on the previous page. The installation ot this junction box and the wiring connecting it to the hollse wiring should be done by a qualified electrician. All wiring must be done in accordance with the Natioral Electrical Code and/or any other applicable local codes or ordinances. The power supply to the junction box must be 120/240 volt or 120/208 volt, 60 hertz A.C. single phase, 3 wire. Do not connect the oven to a D.C.
PAGE 4
INSTALLING THE UNIT IN CABINET The doors should be removed to decrease the weight oven while lifting it into the cabinet, 0.’ the oven and provide a better hand hold on the A. To Remove Doors (See Fig. 1) Use caution! Oven door is heavy. 1. Open door completely. 2. Depress finger tab in oven door hinge area. Push tab toward oven. Lift tab away from door liner and slide toward top of oven door. 3. Repeat step 2 for other side of door. 4.