Operating instructions

SDRY60CE

Sensor Dryer

6kg

Time Remaining

H MIN

Start

(Pause)Delay

Airing

Off

Drying Times

(mins)

Extra Dry

Normal Dr y

Iron Dry

Synthetics

Cottons

Extra Dry

Delicate Plus

Normal Dr y

Iron Dry

5.With assistance, mount dryer on wall brackets. See Fig.4.

6. A second control panel film with inverted symbols is supplied. To fit this film,

pull off the knob and then remove the old film.

Peel the release paper from the back of inverted film, then place new control

panel film on the surface so that the writing is the correct way around.

Fig.4

Caution:

Plug must be accesible after installation.

Stacking installation

You can use a stacking kit (included as an accessory) if you want to mount your

dryer on the top of a Whirlpool front load washing machine, ensure the washer is

the same width as the dryer.

1. Remove 4 screws among screws on the bottom panel (see fig.1), and install

the stacking kit on the bottom panel (see fig.2).

4 Screws

stacking kit

Fig.1

Fig.2

7. Press the Start/Pause button and hold it in the pressed position, and at the

same time, turn the program dial knob from the OFF position to any other

program, until the inversion is displayed.

INSTALLATION INSTRUCTIONS