Installation guide

Product Dimensions
26-3/4"
(67.9 cmn)
handle
24-1/4"
(61.6 cm)
©© ©© b
!cm/
_top
ght
46-1/4"
(117.5 cmn)
overall height
for tall
backguard
models
29-7/8" (75.9 cmn'
width
Installation Clearances
Cabinet opening dimensions shown are for 25" (64 cm)
countertop depth, 24" (61 cm) base cabinet depth and
36" (91.4 cm) countertop height.
If the cabinet depth is greater than 24" (61 cm), the oven frame
must extend beyond cabinet fronts by 1/2"(13 mm) minimum.
_tjI 1 o
-,_ 3O-V_."(76.5 cm) see NOTE.
I i_ opening width 1
18" (45.7 ore) I 2" (5.1 ore) min.
min. clearance space to
upper side side wall or other
cabinet to combustible material
countertop I This shaded area
._ recomnmended for
I installation
I of gas pipe.
I
This shaded area I 10" (25.4 cm)
recommended for
2 _
3" (5.1 cmn)
(7.6 cr.n)_
NOTE: 24" (61 cm) minimum when bottom of wood or metal
cabinet is protected by not less than 1A"(0.64 cm) flame retardant
millboard covered with not less than No. 28 MSG sheet steel,
0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or
0.020" (0.5 mm) copper.
30" (76.2 cm) minimum clearance between the top of the cooking
platform and the bottom of an unprotected wood or metal
cabinet.
If installing a range hood or microwave hood combination above
the range, follow the range hood or microwave hood combination
installation instructions for dimensional clearances above the
cooktop surface.