EN Operating Instructions
1 14 15 16 17 12 13 2 3 4 5 6 8 9 7 18 9 11 10 19 SG C11 CKG UK
A B C D
E F G H 10’ I J
K
en GENERAL SAFETY INSTRUCTIONS • • • • • • • • • • If the plug, power cord or appliance appear to be damaged or if any visible damage or water leaks are found, do not operate the iron. In such cases have it checked by Hotpoint’s authorised staff in order to avoid any hazardous situation. If the appliance was dropped, do not operate it.
en DESCRIPTION OF THE APPLIANCE 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19.
en Replacement fuse covers How to connect an alternative plug If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug. Replacements can be obtained directly from your nearest Service Depot.
en of limescale may damage some parts of the iron and cause its early deterioration. The iron water tank has a capacity of 1200ml with extra 200ml boiler. USING YOUR IRON Temperature selection adjustment (B) Suitable water 1. Although the iron with steam generator can be used with tap water, if the water is very hard (as measured in French degrees), we recommend mixing tap water and demineralised water according to the following table. 2. Hardness degree [°f] 3. 4.
en Ironing with steam (D) Eco function (G) 1. Your generator is equipped with an Eco function that allows energy savings of energy and water compared to normal consumption in terms of maximum steam level. To start the Eco function set the ON/OFF knob (15) to . 2. 3. 4. Make sure that the water level in the reservoir is higher than 1/4. Set the ON/OFF knob in position.
en In order to keep the soleplate perfectly smooth and polished, avoid any contact with metal objects and do not iron sharp objects such as buttons, studs and hinges - they may scratch the plate. garments press the steam button for at least one minute to eject any residues or particles that could stain the fabrics. 5. If your steam generator is equipped with the Optimal Soleplate Temperature technology, you need not adjust the temperature and/or steam.
en • Cosmetic damage must be reported within 14 days from the date of purchase. • The product has been installed and operated correctly and in accordance with our operating and maintenance instructions. • The product is used only on the electricity supply printed on the rating plate. • The product has been used for normal domestic purposes only.
en 13
en TROUBLESHOOTING Problem Possible causes / Solutions The soleplate stays cold and does not warm up. • • The plug was not inserted or is not making contact. Make sure the temperature is not set to Min. The temperature indicator light goes on and off. • The temperature indicator light is on. This shows that the iron is warming up. The indicator light will turn off when the set temperature is reached. Steam comes out in a reduced quantity or does not come out at all.
en The no-water indicator light is on. The Steam Ready indicator light turns on and off. • • The water reservoir needs filling. The water reservoir was not fitted correctly. Place the water reservoir in the relevant housing until it clicks into place. • The Steam Ready indicator light turns on to show that the steam generator has reached the desired steam settings. When you use the steam function, the indicator light turns off. It turns on again when such settings are reached again.
www.indesitcompany.com Power Perfection 03/2015 - ver. 3.