Instruction for Use

hotpoint.eu
18
en
container correctly and close the dust
compartment lid until it clicks into place.
The appliance is equipped with a safety
device that prevents the dust
compartment lid from closing unless the dust
bag / container has been correctly installed.
Replacing the Pure
Clean dust bag (G)
We recommend always using Hotpoint
original Pure Clean dust bags, because
their special fabric allows optimum
   
retention, high performances and a long
motor life.
As the Pure Clean dust bags (34) are made of
fabric, they are more resistant than conventional
paper bags and can retain very ne dust/powder
particles more effectively, thus ensuring maximum
hygiene.
We recommend replacing the Pure
Clean bag as soon as the full-bag
indicator illuminates. Change at least once a
year to be always sure of the hygienic
condition of your vacuum cleaner. The pores
of a bag clogged with dust/powder particles
reduce the motor's suction power and can
cause damage.
1. Make sure the appliance is disconnected
from the electrical outlet.
2. Press the dust-compartment opening button
(13) to open the dust compartment lid (14).
3. Release the bag support (33) and remove
the Pure Clean dust bag (34).
Dispose of the dust bag in compliance
with all local regulations on waste
disposal.
4. Slide a new Pure Clean dust bag into the
dust bag support completely; then place it
back into the special compartment.
5. Close the dust compartment lid until it clicks
into place.

dust compartment lid, it is likely that the
Pure Clean dust bag and/or its dust bag
support have not been assembled correctly.
Do not force the dust bag lid to close, make
sure both parts are in the correct position to
allow lid closure.
the motor lter) into the special dust-
compartment guides.
5. Slide the Pure Clean dust bag into the dust
bag support all the way; then place it into the
special dust compartment.
The appliance is equipped with a safety
device that prevents the dust
compartment lid from closing unless the dust
bag / container has been correctly installed.
6. Close the dust compartment lid until it clicks
into place.
To use the vacuum cleaner with the dust
container, remember to remove all the
following parts: Pure Clean dust bag, dust bag
      
grill.
CLEANING AND
MAINTENANCE
Before cleaning or maintaining the
vacuum cleaner, make sure it has been
unplugged from the electrical outlet. Do not
use aggressive substances or abrasive
materials to clean the appliance, its internal
parts and attachments. Make sure it is
thoroughly dry before using again.
Cleaning the appliance
Use a dry or slightly damp soft cloth to clean the
plastic parts (body, dust compartment, exible
hose etc) and the metal extension pipe (8).
Cleaning the attachments
Before cleaning the attachments refer to the
chapter “Attachments”.
Cleaning the dust compartment (F)
For the routine cleaning of the dust compartment
(38):
1. Press the dust-compartment opening button
(13) to open the dust compartment lid (14).
2. Based on the model, remove the Pure Clean
dust bag (34) or the dust container (39).
3. Clean the dust compartment by removing
any residual dirt with a small brush. If
needed, use a damp soft cloth, taking care
to wipe all its parts entirely dry.
4. Re-place the Pure Clean dust bag or dust