Instruction for Use
17
iten
We advise you to use a low suction power
on delicate surfaces such as curtains,
fabrics, cushions etc to avoid any damage; or at
least open the air regulator to reduce the suction
effect.
5. To pausethe vacuumcleaner,if this feature is
available,youcanusethestandby button (22)
ontheRemotePowerControlortheStart&Stop
function (based on the model). Just insert the
brushintoitshorizontalhousing(30).
6. To switch offthe appliance pressthestart/stop
buttonagain.
7. Disconnect the plug from the electrical
outlet and press the cord-rewind
button (20) until rewinding is complete.
Make sure the cord does not get entangled
during rewinding.
8. Securetheoorheadintoitshorizontal/vertical
housingandstoretheappliance.
Do not start the vacuum cleaner if the plastic
damage the appliance.
FEATURES
Electronic power regulator (B)
Theelectronic power regulator(26)(if available) al-
lowstosetthesuctionpowerrequired.
Onsomemodels,theidealpowerlevelsareindica-
ted,accordingtothesurfacetobecleaned:awnings,
carpetsandhardoors.
The Eco function (if available) allows to save 25%
energy, compared with the consumption relative to
maxsuctionpower,ensuringatthesametimeclea-
ningefcacy.
Remote Power Control (C)
TheRemotepowercontrol(ifavailable)enablesyou
to adjust the suction power directly and effortlessly
fromthehandgrip,withnoneedtobend.Whenusing
thevacuumcleaner, you can keep it on standby by
pressingtheStart&Pausebutton(22).
To insert or change the batteries of your Remote
PowerControl:
1. Openthebatterycompartment(23).
2. Insert two AAA batteries, making sure of the
positiveandnegativepoles.
3. Closethebatterycompartmentuntilitclicksinto
place.
BEFORE FIRST USE
Remove all adhesives, protective plastic materials
and cardboard packaging. Make sure all adhesive
partsareremovedwithasoftdampcloth.
Assembling
1. Fastentheplasticexiblehose(11)tothesuction
inlet(16)untilitclicksintoplace.To removeit,
presstherelease(17)andpullitout.
2. Fit the metal extension pipe (9) into the hand
grip(10)untilitlocksintoplace.Usethelength
regulator(8)toadjustthelengthofthepipe.
3. Fit the attachment you need (see chapter
“Attachments”) into the end of the metal
extensionpipeuntilitlocksintoplace.
If your appliance is equipped with a Remote
Power Control, you will need to insert the
batteries supplied (see paragraph “Remote Power
Control” under chapter “Features”).
USING
THE VACUUM CLEANER (A)
The appliance is equipped with a safety
device that prevents the dust-compartment
lid from closing unless the dust bag has been
correctly installed. Do not force the dust bag lid to
close and make sure all the parts are in the correct
position to allow you to close the lid.
Do not use the vacuum cleaner without
or dust container, as the appliance could get
damaged.
1. Unwind the power cord (34) and plug the
applianceintoanelectricaloutlet(220/240V).
We advise you to unwind the entire power
cord (yellow marker: 6,5m; red marker: 7m)
to avoid any overheating and damage.
2. Press the start/stop button (19) to start the
appliance.
3. Press the Trolley System opening/closing
button (13) to extend the carrying handle (12)
to the desired length until it locks into place.
Thenmanoeuvrethevacuumcleanerusingthe
carryinghandlewhencleaningthehouse.
4. To select the desired suction intensity
(based on the model) use the +/- button
and electronically adjust the power (21) of
the Remote Power Control; or manually
rotate the electronic power regulator (26).