Setup and user guide

ManualsBrandsWhirlpool ManualsDomestic AppliancesSP40 800

Quick guide

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT

In order to receive a more complete assistance, please

Before using the appliance carefully read the Safety

Instruction.

PRODUCT DESCRIPTION

FIRST TIME USE

Wait at least two hours, after the installation, before connecting

the appliance to the power supply. Connect the appliance to the

power supply it starts the operation automatically. The ideal storage

temperatures for the food are preset in the factory.

After turning the appliance on, you must wait for 4-6 hours for the

correct storage temperature to be reached for a normally lled

appliance. Position the antibacterial anti-odour lter in the fan as

demonstrated in the lter packaging (if available). If the audible signal

sounds, it means that the temperature alarm has intervened: press the

button to switch o the acoustic alarms.

CONTROL PANEL

4.6.8. 7.

3.1. 1. Freezer and refrigerator compartment

temperature indicator

2. Fast cool

3. 6

Sense Fresh Control and Fan indicator

4. On/stand-by

5. Alarm indicator

6. Turning o the sound alarm

7. Black out alarm indicator

8. Temperature button

SENSE FRESH CONTROL

The appliance is automatically able to quickly reach the optimal

internal preservation temperature. The 6

Sense Fresh Control function

enables to control also the humidity of the appliance. In order for it to

function correctly, the fan must also be turned on. It is possible to turn

the function on/o (see Fan description).

FAN*

The Fan improves temperature distribution inside the product,

allowing better preservation of stored food and reduction of excess

humidity. By default, the fan is switched on. You can turn the fan on/

o by pressing for 3 seconds Stand by

and Fast Cooling

buttons. The lit 6

Sense Fresh Control symbol indicates that the fan

is on and therefore the 6

Sense Fresh Control function is on. If the

ambient temperature exceeds 27°C, or if drops of water are present

on the glass shelves, it is essential that the fan is on to ensure the

proper preservation of the food. Deactivation of the fan allows energy

consumption to be optimised.

Note: the fan restarts automatically after a power cut or after turning o

the appliance. Do not obstruct the air intake area with food items.

ANTIBACTERIAL FILTER*

Remove it from the box placed in the Fruit and vegetable drawer and

insert into the cover of fan. The replacement procedure is included in

the lter box.

ON/STANDBY

Press the button for 3 seconds to turn the appliance o. Press

the button again briey to reactivate the appliance.

Note: this does not disconnect the appliance from the power supply.

FREEZER AND REFRIGERATOR

COMPARTMENT TEMPERATURE

It is possible to set a dierent temperature of the appliance by pressing

the "Temp." button.

LEDs lit Set temperature

High Low

Low (colder)

Medium-low

Medium

Medium-high

High (less cold)

FAST COOL

Press the button

to quickly cool the refrigerator

compartment or 6 hours before putting large quantities of food to

freeze in the freezer compartment. When the function is turned on the

icon lights up. The function turns o automatically after 36 hours, or

manually by pressing the button again.

Note: avoid a direct contact between the fresh food and the food that is

already frozen.

TURNING OFF THE SOUND ALARM

To turn o the sound alarm, briey press the

button.

* Available only on certain models

Summary of content (4 pages)

PAGE 1
EN Quick guide THANK YOU FOR BUYING A WHIRLPOOL PRODUCT In order to receive a more complete assistance, please register your product on www‌.‌whirlpool‌.‌eu/‌register Before using the appliance carefully read the Safety Instruction. PRODUCT DESCRIPTION FIRST TIME USE Wait at least two hours, after the installation, before connecting the appliance to the power supply. Connect the appliance to the power supply it starts the operation automatically.
PAGE 2
STOP FROST SYSTEM* The STOP FROST SYSTEM facilitates the defrost procedure for the freezer compartment. The STOP FROST accessory is designed to collect some of the frost that forms in the freezer compartment and it is easy to remove and clean, therefore reducing the time needed to defrost the freezer compartment. PROCEDURE TO CLEAN THE STOP FROST ACCESSORY 1. Open the freezer compartment door and remove the upper drawer. 2.
PAGE 3
ACCESSORIES* GLASS SHELVES BOTTLE RACK How to use the bottle rack 1 2 1 2 * Available only on certain models 1 2 1 2 1 1 2
PAGE 4
TROUBLESHOOTING What to do if... Possible reasons Solutions The control panel is switched off, the appliance does not work. There may be an appliance power supply problem. Check that: • there is not a power outage; • the plug is properly inserted in the power socket and the mains double-pole switch (if present) is in the correct position (i.e. allows the appliance to be powered); • the household electrical system protection devices are efficient; • the power cable is not damaged.